Harman Kardon Kardon VIRTUO Smart Speakers 111 TV Smart Things User Guide
- June 10, 2024
- harman Kardon
Table of Contents
Harman Kardon Kardon VIRTUO Smart Speakers 111 TV Smart Things
Product Usage Instructions
- Connect the power cord to the speaker and a power outlet to turn the speaker on. To turn it off, disconnect the power cord.
- Download the Samsung SmartThings app on your Android or iOS device. Connect your device to the Wi-Fi network and follow the app instructions to complete the speaker setup.
- In the SmartThings app, set up voice assistants for hands-free control. Follow the app instructions to enable voice assistants.
- In the SmartThings app, enable streaming services for the speaker. You can stream music via Wi-Fi or Bluetooth. Note that music streaming through Bluetooth will pause when you start streaming through Wi-Fi.
- Using the SmartThings app, add supported smart home devices. The speaker can serve as a hub to control these devices. Refer to the SmartThings app for more details.
You can interact with the speaker using voice commands to the voice assistant. To mute the microphone and stop the voice assistant from listening, use the button control feature.
- Access Bluetooth settings on your device.
- Select “HK VIRTUO” from the list of available devices to pair.
- Your speaker is now connected via Bluetooth.
FAQ
- Q: How can I extend the battery life of the speaker?
- A: To extend battery life, lower the volume level and avoid playing audio at maximum volume for extended periods.
- Q: Can I use the speaker as a Bluetooth speaker without connecting it to Wi-Fi?
- A: Yes, you can use the speaker solely as a Bluetooth speaker without connecting it to a Wi-Fi network.
WHAT’S IN THE BOX
- Power cord quantity and plug type vary by region.
POWER ON/OFF
APP
- Download the Samsung SmartThings app. Connect your Android™ or iOS device to the Wi-Fi network and follow app instructions to complete the speaker setup.
SET UP VOICE ASSISTANTS
MUSIC STREAMING
- Enable streaming services for the speaker in the SmartThings app.
WORKS AS A HUB OF SMARTTHINGS
- With the SmartThings app, add the supported smart home devices.
- You can control the smart home devices through the speaker.
- For more information, see the SmartThings app.
VOICE CONTROL
- You can get hands-free help by talking to the voice assistant.
BUTTON CONTROL
- Mute the microphone to stop the voice assistant from listening.
BLUETOOTH PAIRING
- Music streaming through Bluetooth will pause when you start music streaming through Wi-Fi.
TECH SPECIFICATIONS
- Transducer: 53 x 93mm woofer, 20mm tweeter
- Rated output power: 30W RMS for woofer, 10W RMS for tweeter
- Frequency response: 60Hz – 20kHz
- Signal-to-noise ratio: > 80dB
- Music play time: up to 20 hours (dependent on volume level and audio content)
- USB ports: USB Type A x1, USB Type C x1
- Bluetooth version: 5.3
- Bluetooth profile: AVRCP 1.5 and A2DP1.3
- Bluetooth transmitter frequency range: 2.4GHz-2.4835GHz
- Bluetooth transmitter power: <13dBm (EIRP)
- Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
- 5G Wi-Fi transmitter frequency range: 5.15-5.35GHz, 5.470-5.725GHz, 5.725-5.825GHz
- 5G Wi-Fi transmitter power: <23dBm
- 5G Wi-Fi modulation: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM)
- 5G Wi-Fi network compatibility: 802.11a/n/ac/ax
- 2.4G Wi-Fi transmitter frequency range: 2.4GHz-2.4835GHz
- 2.4G Wi-Fi transmitter power: <20dBm
- 2.4G Wi-Fi modulation: DSSS (DBPSK, DQPSK, CCK), OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM)
- 2.4G Wi-Fi network compatibility: 802.11b/g/n
- Product dimensions (W x H x D): 223 x 97 x 94mm/8.8 x 3.8 x 3.7″
- Net weight: 1.0kg/2.2lbs
- Packaging dimensions (W x H x D): 257 x 131 x 120mm/10.1 x 5.2 x 4.7″
- Gross weight: 1.7kg/3.7lbs
- Maximum operation temperature: 45°C
FCC STATEMENT
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B) / NMB-3 (B).
IC Caution
User should also be advised that:
- the device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
- the maximum antenna gain permitted for devices in the bands 5250 – 5350 MHz and 5470 – 5725 MHz shall comply with the e.i.r.p. limit: and
- the maximum antenna gain permitted for devices in the band 5725 – 5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.
- Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250 – 5350 MHz and 5650 – 5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
High-power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. No configuration controls are provided for this wireless equipment allowing any change in the frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules.
FCC/IC Radiation Exposure Statement: This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This product contains open-source software licensed under GPL. For your convenience, the source code and relevant build instructions are also available at https://harman- webpages.s3.amazonaws.com/Harman_One_OS_package_license_list.htm.
Please feel free to contact us at
- Harman Deutschland GmbH
- ATT: Open Source, Gregor Krapf-Gunther, Parkring 3
- 85748 Garching bei Munchen, Germany
- or_OpenSourceSupport@Harman.com_if you have additional questions regarding the open-source software in the product.
INFORMATION
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
- Wi-Fi CERTIFIED 6™ and the Wi-Fi CERTIFIED 6™ Logo are trademarks of Wi-Fi Alliance®.
- Google, Android, and Chromecast built-in are trademarks of Google LLC. Google Assistant is not available in certain languages or countries.
- Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries. To control this AirPlay 2–2-enabled speaker, iOS 11.4 or later is required.
- Amazon, Alexa and all related marks are trademarks of Amazon.com, Inc. or its affiliates.
- Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify Software is subject to third-party licenses found here: https://www.spotify.com/connect/third-party-licenses.
References
- Amazon.com
- German market leader for CRM in SMEs - CAS Software
- Spotify - Connect
- harman-webpages.s3.amazonaws.com/Harman_One_OS_package_license_list.htm
- Third Party Licenses | Spotify for Developers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>