Harman Kardon AVR 3700 Audio Video Receiver Owner’s Manual
- October 30, 2023
- harman Kardon
Table of Contents
Harman Kardon AVR 3700 Audio Video Receiver
AVR 3700, AVR 370
AVR 2700, AVR 270
Audio/video receiver
Product Information
The AVR 3700, AVR 370, AVR 2700, and AVR 270 are digital audio/video receivers that offer advanced audio and video processing capabilities. They are designed to simplify home entertainment without compromising performance. The receivers come with a variety of listening and viewing options.
Supplied Accessories
The receivers come with the following accessories:
- Remote control
- Batteries
- AM and FM antennas
- Power cord
- Quick-start guide
- Owner’s manual
Important Safety Information
Please read the safety instructions carefully before using the product. Keep the product away from heat sources and water. Do not expose the product to moisture or liquid. Do not use the product near water or in damp conditions. Do not block any ventilation openings on the product. Use only the accessories that come with the product or recommended by the manufacturer.
Place the Receiver
Place the receiver on a flat surface in a well-ventilated area. Do not
place any objects on top of the receiver. Make sure there is enough space
around the receiver for proper ventilation. Keep the receiver away from heat
sources and direct sunlight. Do not place the receiver on an unstable surface.
Product Usage Instructions
To use the AVR receivers, follow these steps:
Step 1: Connect Your Speakers
Connect your speakers to the receiver’s speaker connectors.
Follow the instructions in the owner’s manual for proper speaker placement and
connection.
Step 2: Connect Your Subwoofer
Connect your subwoofer to the receiver’s subwoofer connector.
Follow the instructions in the owner’s manual for proper subwoofer connection.
Step 3: Connect Your TV or Video Display
Connect your TV or video display to the receiver’s video output
connector. Follow the instructions in the owner’s manual for proper video
connection.
Step 4: Connect Your Audio and Video Source Devices
Connect your audio and video source devices to the receiver’s input
connectors. Follow the instructions in the owner’s manual for proper source
device connection.
Step 5: Connect to USB and iOS Devices
To connect to USB and iOS devices, use the receiver’s USB port.
Follow the instructions in the owner’s manual for proper USB and iOS device
connection.
Step 6: Connect to Your Home Network
To connect to your home network, use the receiver’s network connector.
Follow the instructions in the owner’s manual for proper network connection.
Step 7: Connect the Radio Antennas
Connect the AM and FM antennas to the receiver’s antenna connectors. Follow
the instructions in the owner’s manual for proper antenna connection.
Step 8: Turn On the AVR
Turn on the AVR by pressing the power button on the front panel or remote
control.
Step 9: Use the On-Screen Menu System
Use the on-screen menu system to configure the AVR for your speakers, set
up your sources, and set up the network. Follow the instructions in the
owner’s manual for proper on-screen menu system usage.
Step 10: Operating Your AVR
Use the remote control to control the volume, mute the sound, listen
through headphones, select a source, listen to FM and AM radio, listen to
media on a USB device, listen to an iPod/iPhone/iPad device, listen to vTuner
(Internet radio), and listen to media via your home network. Follow the
instructions in the owner’s manual for proper AVR operation.
Introduction
Thank you for choosing this Harman Kardon product!
For more than fifty years, the Harman Kardon mission has been to share a
passion for music and entertainment, using leading-edge technology to achieve
premium performance. Sidney Harman and Bernard Kardon invented the receiver, a
single component designed to simplify home entertainment without compromising
performance. Over the years, Harman Kardon products have become easier to use,
while offering more features and sounding better than ever. The AVR 3700/AVR
370 7.2-channel and AVR 2700/AVR 270 7.1-channel digital audio/ video
receivers continue this tradition with some of the most advanced audio and
video processing capabilities yet, and a wealth of listening and viewing
options. To obtain the maximum enjoyment from your new receiver, please read
this manual and refer back to it as you become more familiar with its features
and their operation. If you have any questions about this product, its
installation or its operation, please contact your Harman Kardon retailer or
custom installer, or visit the Web site at
www.harmankardon.com.
Supplied Accessories
The following accessory items are supplied with your receiver. If any of these
items are missing, please contact your Harman Kardon dealer or Harman Kardon
customer service at www.harmankardon.com.
- System remote control
- Zone 2 remote control (AVR 3700/AVR 370 only)
- EzSet/EQ™ microphone
- AM loop antenna
- FM wire antenna
- Six AAA batteries (AVR 3700/AVR 370); four AAA batteries (AVR 2700/AVR 270)
- AC power cord
IMPORTANT SAFETY INFORMATION
Verify Line Voltage Before Use
The AVR 3700 and AVR 2700 have been designed for use with 120-volt AC current.
The AVR 370 and AVR 270 have been designed for use with 220 – 240-volt AC
current. Connection to a line voltage other than that for which your receiver
is intended can create a safety and fire hazard and may damage the unit. If
you have any questions about the voltage requirements for your specific model,
or about the line voltage in your area, contact your selling dealer before
plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. We
do not recommend that extension cords be used with this product. As with all
electrical devices, do not run power cords under rugs or carpets, or place
heavy objects on them. Damaged power cords should be replaced immediately by
an authorized service center with a cord meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug;
never pull the cord. If you do not intend to use your receiver for any
considerable length of time, disconnect the plug from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside this product. Opening the
cabinet may present a shock hazard, and any modification to the product will
void your warranty. If water or any metal object such as a paper clip, wire or
staple accidentally falls inside the unit, disconnect it from the AC power
source immediately, and consult an authorized service center.
CATV or Antenna Grounding (AVR3700/AVR 2700)
If an outside antenna or cable system is connected to this product, be certain
that it is grounded so as to provide some protection against voltage surges
and static charges. Section 810 of the United States National Electrical Code,
ANSI/NFPA No. 70-1984, provides information with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes and requirements of the
grounding electrode.
NOTE TO CATV SYSTEM INSTALLER : This reminder is provided to call the
CATV (cable TV) system installer’s attention to article 820-40 of the NEC,
which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as possible.
Place the Receiver
- Place the receiver on a firm and level surface. Be certain that the surface and any mounting hardware can support the AVR’s weight.
- Provide proper space above and below the AVR for ventilation. Recommended clearance distances are 30cm above the unit, 30cm behind the unit and 30cm on each side of the unit.
- If you install the AVR in a cabinet or other enclosed area, provide cooling air within the cabinet. Under some circumstances, a fan may be required.
- Do not obstruct the ventilation slots on the top of the receiver or place objects directly over them.
- Do not place the receiver directly on a carpeted surface.
- Do not place the receiver in moist or humid locations, in extremely hot or cold locations, in areas near heaters or heat registers, or in direct sunlight.