BLACKVUE DR770X Box Series Cloud Dashcam Instructions
- June 13, 2024
- BLACKVUE
Table of Contents
DR770X Box Series Cloud Dashcam
Product Information
The product is a Blackvue DR770X Box Series, which includes
various components for installation and usage. It consists of a
tamperproof bracket, mount bracket, Allen wrench, double-sided
tape, rear camera, rear IR camera, pry tool, rubber window sealing
and/or molding, camera connection cable, power cord, rear truck
camera, screws, rear camera waterproof connection cable, GNSS
Module, USB socket, and Blackvue Connectivity Module
(CM100GLTE).
Rear Camera Installation
-
Align the tamperproof bracket with the mount bracket.
-
Use the Allen wrench to tighten the screw partially.
-
Peel off the protective film from the double-sided tape.
-
Attach the rear camera to the rear windshield.
-
Tighten the screw fully to secure the camera.
-
Use the pry tool to lift the edges of the rubber window sealing
and/or molding. -
Tuck in the rear camera connection cable.
Rear IR Camera Installation
-
Install the rear IR camera at the top of the front
windshield. -
Clean and dry the windshield before installation.
-
Detach the tamperproof bracket from the rear IR camera by
rotating the screw counterclockwise with the Allen wrench. -
Connect the rear IR camera (‘Rear’ port) and main unit (Option)
using the rear camera connection cable. -
Adjust the angle of the lens by rotating the body of the rear
IR camera. -
Use the pry tool to lift the edges of the rubber window sealing
and/or molding. -
Tuck in the rear IR camera connection cable.
Rear Truck Camera Installation
-
Install the rear camera externally at the top of the back of
the truck. -
Fasten the rear camera mounting bracket to the top of the back
of the vehicle using the included screws. -
Connect the Main box (Rear or Option Port) and the rear camera
(V out) using the rear camera waterproof connection cable.
GNSS Module Installation and Pairing
- Connect the GNSS Module to the box.
- Attach the GNSS Module to the edge of the window.
- Insert the cables into the cable cover.
- Connect the cables to the USB socket.
Blackvue Connectivity Module (CM100GLTE) Installation
(Optional)
-
Install the connectivity module at the top corner of the
windshield. -
Clean and dry the windshield before installation.
-
Turn off the engine.
-
Unscrew the bolt that locks the SIM slot cover on the
connectivity module. -
Remove the cover and unmount the SIM slot using the SIM eject
tool. -
Insert the SIM card into the slot.
Align the tamperproof bracket with the mount bracket. Use the Allen wrench to
tighten the screw. Do not fully tighten the screw as this should be done after
attaching the camera to the rear windshield.
Peel off the protective film from the double-sided tape and attach the rear
camera to the rear windshield.
Adjust the angle of the lens by rotating the body of the front camera. We
recommend pointing the lens slightly downwards ( 10° below horizontal), so as
to record video with a 6:4 road to background ratio. Tighten the screw fully.
Use the pry tool to lift the edges of the rubber window sealing and/or molding
and tuck in the rear camera connection cable.
Camera connection cable
18 BLACKVUE
ENGLISH
Rear IR camera installation
Install the rear IR camera at the top of the front windshield. Remove any
foreign matter and clean and dry the windshield before installation.
Detach the tamperproof bracket from the rear IR camera by rotating the screw
counterclockwise with the Allen wrench.
Connect the rear IR camera (‘Rear’ port) and main unit (“Option”) using the
rear camera connection cable.
Note y Please make sure that the Rear Infrared camera cable is connected to
the “Rear” or “Option” port in the main unit. y In case of connecting the rear
camera cable to “Rear” port the output file name will start with “R”. y In
case of connecting the rear camera to “Option” port the output file name will
start with “O”.
DR770X Box Series 19
Align the tamperproof bracket with the mount bracket. Use the Allen wrench to
tighten the screw. Do not fully tighten the screw as this should be done after
attaching the camera to the rear windshield. Peel off the protective film from
the double-sided tape and attach the rear IR camera to the front windshield.
Adjust the angle of the lens by rotating the body of the rear IR camera.
20 BLACKVUE
ENGLISH
Use the pry tool to lift the edges of the rubber window sealing and/or molding
and tuck in the rear IR camera connection cable.
Camera connection cable
Power cord
DR770X Box Series 21
Rear truck camera installation
Install the rear camera externally at the top of the back of the truck.
Fasten the rear camera mounting bracket using the included screws to the top
of the back of the vehicle.
Connect the Main box (Rear or Option Port) and the rear camera (“V out”) using
the rear camera waterproof connection cable.
Note y Please make sure that the Rear Truck camera cable is connected to the
“Rear” or “Option” port in the main unit. y In case of connecting the Rear
Truck camera cable to “Rear” port the output file name will start with “R”. y
In case of connecting the Rear Truck camera to “Option” port the output file
name will start with “O”. 22 BLACKVUE
ENGLISH
GNSS Module installation and pairing
Connect the GNSS Module to the box and attach it to the edge of the window.
Insert the cables into the cable cover and connect them to the USB socket.
DR770X Box Series 23
Blackvue Connectivity Module (CM100GLTE) installation (optional)
Install the connectivity module at top corner of the windshield. Remove any
foreign matter and clean and dry the windshield before installation.
Warning y Do not install the product in a location where it can obstruct the
driver’s field of vision. Turn off the engine. Unscrew the bolt that locks the
SIM slot cover on connectivity module. Remove the cover, and unmount the SIM
slot using the SIM eject tool. Insert the SIM card into the slot.
Peel off the protective film from the double-sided tape and attach the
connectivity module to the top corner of the windshield.
24 BLACKVUE
ENGLISH
Connect the main box (USB port) and the connectivity module cable (USB). Use
the pry tool to lift the edges of the windshield trim/molding and tuck in the
connectivity module cable. Note y SIM card must be activated to use LTE
service. For details, refer to the SIM Activation Guide.
DR770X Box Series 25
Cigarette lighter power cable installation
Plug the cigarette lighter power cable into the cigarette lighter socket of
your car and the main unit.
Use the pry tool to lift the edges of the center console and tuck in the power
cord.
Hardwiring for main Unit
A Hardwiring Power Cable uses the automotive battery to power your dashcam
when the engine is off. A low voltage power cut-off function and a parking
mode timer to protect the automotive battery from discharge is installed in
the device. Settings can be changed in the BlackVue App or Viewer.
To do the hardwiring, first locate the fuse box to connect the hardwiring
power cable. Note y Location of the fuse box differ by manufacturer or model.
For details, refer to the vehicle owner’s manual.
26 BLACKVUE
ENGLISH
After removing fuse panel cover, find a fuse that powers on when engine is
turned on (ex. cigarette lighter socket, audio, etc) and another fuse that
remains powered on after the engine is turned off (ex. hazard light, interior
light). Connect the ACC+ cable to a fuse that powers on after engine start,
and BATT+ cable to a fuse that remains powered on after engine is turned off.
Note y To use battery saver feature, connect the BATT+ cable to the hazard
light fuse. Functions of fuse differ by
manufacturer or model. For details refer to the vehicle owner’s manual.
Connect the GND cable to metal ground bolt.
Connect the power cable to the DC in terminal of the main unit. BlackVue will
power up and start recording. Video files are stored on the microSD card. Note
y When you run the dashcam for the first time the firmware is automatically
loaded onto the microSD card. After
the firmware has been loaded onto the microSD card you can customize settings
using the BlackVue app on a smartphone or BlackVue Viewer on a computer. Use
the pry tool to lift the edges of the center console and tuck in the
hardwiring power cable.
DR770X Box Series 27
SOS button pairing
SOS button can be paired in two ways. 1. In the blackvue app, tap on Camera,
choose Seamless Pairing models and select “DR770X Box”.
To connect to the main unit press SOS button until you a hear a “beep” sound.
Your dashcam will also be verified on the app with this step.
28 BLACKVUE
ENGLISH
2. In the Blackvue App go to “Camera Settings” by tapping on three dots and
choose “System settings”
Choose “SOS Button” and tap on “Register”. To connect to the main unit press
SOS button until you a hear a “beep” sound.
DR770X Box Series 29
Using BlackVue app App overview
*Image shown is the BlackVue app home screen Explore y See the latest product and marketing information from BlackVue. Also watch popular video uploads and live views
shared by BlackVue users. Camera y Add and remove camera. Watch recorded
videos, check camera status, change the camera settings and use Cloud
functions of cameras added to the camera list. Event map y See all the events
and uploaded videos on the map shared by BlackVue users. Profile y Review and
edit account information.
30 BLACKVUE