OSRAM Tuner4TRONIC NFC Scanner Passive Repeater Installation Guide
- June 13, 2024
- OSRAM
Table of Contents
NFC Scanner
User guide for the passive antenna
Tuner4TRONIC NFC Scanner Passive Repeater
We offer an industry-proven solution consisting of an intuitive software suite and standardized plug-and-play hardware interfaces to optimize, simplify and speed up the manufacturing, installation and maintenance of indoor and outdoor LED luminaires. Hardware interfaces for smartphones with NFC antenna can be used to program NFC LED drivers. In case your smartphone has a low-quality NFC antenna or does not have an NFC antenna at all, you can also use the optional passive antenna and NFC Scanner. Via Bluetooth ® , these devices can be easily connected to the smartphone and then provide a reliable and stable NFC connection. Bluetooth ® also offers a more comfortable way of programming LED drivers which are already built into a luminaire.
Areas of application
- Wireless programming of LED drivers using the T4TField software
Tuner4TRONIC Field app features
- Wireless and mains-voltage-free programming of OSRAM outdoor NFC LED drivers
- Adjustment of luminaire light output and dimming levels
- Copy-and-paste function to transfer luminaire settingsfrom defective to replacement LED drivers
- Support of our new-generation OT 1DIM and 4DIM outdoor LED NFC drivers
Product family features
- Small and robust NFC antenna extension
- Uses Bluetooth ® to provide NFC functionality to smartphones without NFC antenna
- Includes passive antenna for increased signal strength
Step-by-step instructions
Provided equipment
Equipment and accessories
- USB cable (Micro USB type B)
- NFC Scanner
- Passive antenna
- Velcro fasteners
Step 1:
Remove the protective film from the adhesive surface of the Velcro fasteners
Step 2:
Stick one of the provided Velcro fasteners on the marked DUAL LOCK area of the
passive antenna
Step 3:
Stick the other one of the provided Velcro fasteners on the NFC Scanner
Step 4:
Use the Velcro fasteners to attach the NFC Scanner to the passive antenna
Step 5: Open the Bluetooth ® function on your mobile phone and start the
T4T Field app Step 6:
T4T Field app programming can be started
Use our contact form
****www.inventronics-light.com/contact-us
Service contact:
Inventronics GmbH
Parkring 31-33, 85748 Garching, Germany
www.inventronics-light.com
support@inventronicsglobal.com
INVENTRONICS is a licensee of ams OSRAM.
OSRAM is a trademark of ams OSRAM.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>