frisco Cat Tree 214377 Instruction Manual

CAT TREE

INSTRUCTION MANUAL

SKU# 214377, 214378
OVERALL DIMENSIONS
38 in H x 15.3in W x 27.5in L
97 cm H x 39 cm W x 70cm L
BASEBOARD DIMENSIONS
13.9in W x 23.4in L
35.5cm W x 59.5cm L

FULL ASSEMBLY

Available exclusively at 1-800-672-4399

WARNINGS & CAUTIONS

PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS TO AVOID PET INJURY OR PROPERTY DAMAGES.

• Keep all tools and instructions in a safe place for future reference.
• Follow the instructions carefully and make sure you’ve completed each step.
• This cat tree is intended for cat use only, please keep children away.
• Keep all small parts away from children/pets to avoid choking hazards.
• Never climb, rock, shake, step or hang on the cat tree.
• Place your cat tree indoors, away from direct sunlight or damp areas.
• Cat trees should be placed on a flat, level surface for stability.
• Check your cat tree often for loose screws or parts that might need re-tightening.
• If your cat tree gets torn or damaged, please discard it.
• The product photo may vary slightly from your fully assembled cat tree as this product is continually being enhanced.

CLEANING INSTRUCTIONS

Spot clean stains and vacuum fur (using small handheld or attachment) when necessary.

COMPONENTS

Prior to assembly, be sure to identify and sort all components shown below.

1                                               2 3

1 PC Baseboard          1 PC Apartment      1 PC Platform

4                                          5

1 PC Perch Platform       1 PC Scratching Post 540 mm

6                                                          7

1 PC Scratching Post 235 mm        1 PC Scratching Post 320 mm

8

3 PCS Post 265 mm              1 PC Bolstered perch cover

A                   M10 X 46mm Bolt    3 PCS
B       M10 X 90mm Bolt     1 PC
C                   M8 X 40mm Bolt 6 PCS
D                     M8 X 31mm Bolt      1 PC
                  5mm Wrench             1 PC

Available exclusively at 1-800-672-4399

ASSEMBLY INSTRUCTIONS

STEP 1

For easier assembly, insert all 3 posts inside to frame the apartment from each corner. Align the holes between apartment board and post, then loosely attach the screws at both end without completely tightening. Repeat for all corners. Then, tighten all 6 screws to finish apartment assembly.

STEP 2

STEP 3

FINISHED ASSEMBLY

Available exclusively at 1-800-672-4399

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>