BLACKVUE External Connectivity Module User Guide

: June 7, 2024
: BLACKVUE

Table of Contents

User Guide
- BLACKVUE External Connectivity Module (CM100LTE)
In the box
At a glance
Install and power up
Product specifications
APPENDIX – PRODUCT SPECIFICATION
Product Warranty
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Guide

BLACKVUE External Connectivity Module (CM100LTE)

For manuals, customer support and FAQs go to www.blackvue.com

In the box

Check the box for each of the following items before installing the BlackVue device.

FIG 1 In the box

At a glance

The following diagram explains details of the external connectivity module.

FIG 2 At a glance

Install and power up

Install the connectivity module at top corner of the windshield. Remove any foreign matter
and clean and dry the windshield before installation.

FIG 3 Install and power up

Warning: Do not install the product in a location where it can obstruct the driver’s field of vision.

Turn off the engine.
Unscrew the bolt that locks the SIM slot cover on connectivity module. Remove the cover, and unmount the SIM slot using the SIM eject tool. Insert the SIM card into the slot.

FIG 4 Install and power up

Peel off the protective film from the double-sided tape and attach the connectivity module to the top corner of the windshield.

FIG 5 Install and power up

Connect the front camera (USB port) and the connectivity module cable (USB).
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the connectivity module cable.
Turn on the engine. The BlackVue dashcam and connectivity module will power up.

Note

For full details on installing the dashcam on your vehicle, refer to the “Quick Start Guide” that is included in the BlackVue dashcam package.
SIM card must be activated to use LTE service. For details, refer to the SIM Activation Guide.

Product specifications

CM100LTE

FIG 7 Product specifications

FIG 8 Product specifications

APPENDIX – PRODUCT SPECIFICATION

CM100LTE

FIG 9 APPENDIX – PRODUCT SPECIFICATION

Product Warranty

The term of this product warranty is 1 year from the purchase date. (Accessories such as an External Battery/microSD Card: 6 Months)
We, PittaSoft Co., Ltd., provide the product warranty according to the Consumer Dispute Settlement Regulations (drawn up by the Fair Trade Commission). PittaSoft or designated partners will provide the warranty service upon request.

FIG 10 Product Warranty

FIG 11 Product Warranty

This warranty is only valid in the country where you purchased the product.

FIG 12 Product Feature

FCC ID: YCK-CM100LTE / Contains FCC ID: XMR201605EC25A / Contains IC ID: 10224A-201611EC25A

Declaration of Conformity
Pittasoft declares that this device complies with the essential requirements and relevant provisions of Directive 2014/53/EU

Go to www.blackvue.com/doc to view the Declaration of Conformity.

FIG 13 Product Info