sensorswitch WSXA Occupancy Motion Sensor Switch User Guide
- June 11, 2024
- sensorswitch
Table of Contents
Quick Recommendation Guide
Typical Applications
| Private Offices | (Typical Energy Savings: 30% – 50%) | |
|---|---|---|
| Up to 15’x15’ Without Obstructions | WSXA / WSXA D | Sensor must have |
visibility to desktop activity
Up to 15’x15’ With Obstructions| WSXA PDT /
WSXA PDT D| Small rooms without direct line of sight (also required if
occupant
has back to sensor)
Up to 20’x20′| CM PDT 9| Place within visual sight of main entry door
0-10V Dimming| WSXA PDT D or
SPODMRA D| LED dimming control with or without motion sensor
Conference Rooms| | (Typical Energy Savings: 30% – 50%) †
Up to 15’x15′| WSXA PDT /
WSXA PDT D| Sensor will detect both motion and sound
Up to 20’x20′| CM PDT 9| Place within visual sight of main entry door
Up to 30’x30′| WV PDT 16| Place sensor in corner along entrance wall
Classrooms| | (Typical Energy Savings: 40% – 60%) †
Up to 30’x30′| WV PDT 16| Place sensor in corner along entrance wall
Greater than 30’x30′| Multiple WV PDT 16 or CM PDT 10| Place sensors in
opposite corners
Open Office Areas| | (Typical Energy Savings: 20% -40%) †
8′-10′ Mounting Height| Multiple CM PDT 9| Place sensors on 25’ – 30’ centers
and cover all entrances
Restrooms| | (Typical Energy Savings: 50% – 80%) †
Private| WSXA | For rooms without obstructions
Private with Fan| WSXA 2P: FAN| No obstructions, relay 1 controls lights,
relay 2 is for fan
Up to 4 Stalls| WSXA PDT| For rooms with obstructions
4 to 7 Stalls| CM PDT 9| Place within visual sight of the main entry door
More than 7 Stalls| Multiple CM PDT 9| Contact your Acuity Sales
Representative for assistance
Corridors| | (Typical Energy Savings: 20% – 60%) †
9′ Mounting Height| CM 10| Place sensors 50’ on center
12′ Mounting Height| CM 10*| Place sensors 60’ on center
Gymnasiums| | (Typical Energy Savings: 20% – 50%) †
25′ Mounting Height| LSXR 6| Place sensors on 40’ centers and cover all
entrances
Warehouses| | (Typical Energy Savings: 20% – 50%) †
360°, 15′ – 45′ Mounting Height| LSXR 6| 1 sensor per fixture
Aisle Control| LSXR 50| Coverage spans multiple fixtures
- Requires power pack(s).† Results typical; actual savings may differ.
**Multi-way (3-way) configurations are available – look for “MWO” on the spec sheet!
***For 347 VAC applications, please add 347 to product nomenclature
Visible Light Programming, learn more at https://sensorswitch.acuitybrands.com/overview/vlp
Wiring Diagrams
Notes:
- Unit will draw power from either line connection.
- When switching loads on both relays (2P version), the line inputs must be on the same phase.
- Substitute PP20 with PP16X for 347 VAC applications
LINE VOLTAGE – SINGLE RELAY (I.E., LSXR XX)
Notes
- Black wires can be reversed
- Wire is red for HVOLT version (required for 347 VAC)
- Disconnect and cap black output wire going to driver/ballast if switching fixture is not required.
LINE VOLTAGE – DUAL RELAY (I.E., LSXR XX 2P)
Notes
- Black wires can be reversed.
- Blue wires can be reversed.
- Wire is red 347 VAC version.
- Red wires can be reversed.
One Lithonia Way
Conyers, Georgia 30012
800.705.SERV (7378)
www.acuitybrands.com
©2017-2020, 2023 Acuity Brands Lighting, Inc.
All rights reserved. | SSI_5989_0223
References
- Acuity Brands | Lighting, Controls, and Building Management Solutions
- SensorSwitch VLP Mobile App | Sensor Programming
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>