SUPERATV IN-PS-4-88-400W Power Steering Kit Installation Guide

: June 13, 2024
: SUPERATV

Table of Contents

SUPERATV IN-PS-4-88-400W Power Steering Kit
INSTALLATION INSTRUCTIONS
Connections
Wiring Details
Liability Statement.
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUPERATV IN-PS-4-88-400W Power Steering Kit

INSTALLATION INSTRUCTIONS

Do not discard packaging until the product has been successfully installed.
Discard any remaining hardware.

Item Description

SUPERATV-IN-PS-4-88-400W-Power-Steering-Kit-fig-1

(Kit contents continue on the following page)

Need help with your installation

sales@superatv.com
www.superatv.com
1-855-743-3427
8:00am – 8:00pm EST M-Th
- 8:00am – 7:00pm EST Friday
- 9:00am – 2:00pm EST Saturday
© 2023 SuperATV.com®. All Rights Reserved

Read instructions and view illustrations before beginning.

Item Description

G| Motor
H| ECU
J| Wire Harness

SUPERATV-IN-PS-4-88-400W-Power-Steering-Kit-fig-6

Connections

Before installing, ensure that all Gaskets in electrical connections are properly seated.
If Gaskets are not seated use a Flathead Screwdriver to seat.

Removal: Keep all components removed from the machine. SUPERATV-IN-
PS-4-88-400W-Power-Steering-Kit-fig-7 SUPERATV-IN-PS-4-88-400W-Power-Steering-Kit-fig-8

Removal continued: Keep all components removed from the machine . SUPERATV-IN-PS-4-88-400W-Power-Steering-Kit-fig-9

Remove stock Lower Steering Shaft, Power Steering unit, and Upper Steering Shaft.
Insert Lower Shaft (C) through Firewall and secure to Rack and Pinion with provided hardware on Shaft; tighten.
Install Motor (G) onto Lower Shaft (C) with provided hardware on Shaft; tighten.
Install Motor Mount (A) to Frame with hardware shown; do not tighten.
Secure Motor (G) to Motor Mount (A) with hardware shown; tighten.
install ECU Mount 1 (D) and ECU Mount 3 (F) to ECU (H) with hardware shown; tighten.
Secure the Upper Shaft (B) to Motor (G) with the provided hardware on the Shaft.
Tighten all Upper Shaft (B) hardware.
Plug in Wiring Harness (J) and Motor (G) connections to ECU.
Tighten all hardware completely
Reinstall applicable stock components; see page 3.

Wiring Details

ECU Functions

Plug/Function

A	Motor
B	Main Power and Ground
C	Non-Contact Torque Sensor
D	Key-On Power, Speed Sensor Wire, and LED

When activated, LED Diagnostic Light will flash once for about 1 second before turning off indicating proper function. Should different patterns occur, contact SuperATV.

Liability Statement.

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satisfied customers, users should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, the user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if the item was not installed properly, misused, or modified. Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation of law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you. The Buyer is responsible to fully understanding the capability and limitations of his/her vehicle according to manufacturer specifications, warnings, and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings, and/ or instructions. The Buyer is also responsible to obey allapplicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.