BORMANN BTW Series Wall Mounted Kitchen Faucet Owner’s Manual
- June 4, 2024
- BORMANN
Table of Contents
BTW Series Wall Mounted Kitchen Faucet
Owner’s Manual
BTW Series Wall Mounted Kitchen Faucet
BTW3000 – BTW3010 – BTW3240 – BTW3250 – BTW3020 BTW3030 – BTW3040 – BTW3050 –
BTW3060 – BTW3070-| BTW3090 – BTW3100 – BTW3110 – BTW3120 BTW3130 – BTW3140 –
BTW3150 – BTW3260 – BTW3080
---|---
Art-Nr:
026006 – 026013 – 026501 – 026518 – 026020 – 026037- 026044- 026051 – 026068 –
026075 – 026082 – 026099 – 026105 – 026112- 026129 – 026136 – 026143 – 026150
– 026525
Service and Maintenance Instructions
For maintenance of the long and comfortable operation of the acquired product, we urgently recommend you:
- To make installations by means of qualified experts and authorized organizations, which have relevant licenses. These services are provided at extra cost.
- Stick to the service and installation instructions while installing.
- To use the filter of water purification from mechanical impurity with purification efficiency of no more than 315 microns.
- To keep the attractiveness of glitter on the chrome plated details it is recommended periodically to wipe them with fabric wetted in soapsuds and then to clean them with a dry soft fabric. It is expressly forbidden to use acidiferous, chlorine-containing, and abrasive cleaning fluids.
- Periodically take off the calcigerous cake from the aerator. To do this turn the aerator carefully off with the spanner wrench of suitable size take out the internal unit and soak it in a diluted solution of vinegar for an hour. Then wash it properly in poor water and carefully assemble it.
Installation
-
The installation of the mixed tap must be done by a specialist, who has a license for this work.
-
Make sure that the pressure control valve and the anti-calciferous filter are mounted in the system of water admission.
-
Otherwise, mount the required components on the water supply system before you continue to install the mixer tap.
-
Regulate the valve for the reduction of pressure.
-
Carefully wash the junctions. · Put the rubber packing on the bottom of the mixer tap.
-
Install the mixer tap on the sink from the inside of the sink and put the packing on the mixer tap body. Screw the threading rod, then mount the washer. After that fasten the mixer tap to the sink with a screw.
-
Screw the flexible admission to the butt-end of the mixer tap, to ensure air tightness.
-
With the help of coupling nut of the flexible admission connect the mixer tap with a water supply system, which leads to hot and cold water.
-
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
-
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
-
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
WWW.BORMANNTOOLS.COM **** DISPOSE
OF PACKAGING RESPONSIBLY
DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE