Camfil CamGT 3V-440 High Efficiency Air Filter User Manual

Table of Contents

The CAMGT 3V-440 is a high-performance air filter designed for installations where safety and reliability are crucial. It offers resistance to turbulence and extreme pressure drop, making it suitable for environments with high dust concentrations. The filter features a patented aerodynamic support grid, optimized media area, and hydrophobic filter construction to ensure low operational pressure drop even when wet. Its frame is made of plastic molded ABS, and it is sealed on all sides with a patented double sealing process.
The filter is built on a solid 440 mm deep frame with extended media area, providing industry-leading pressure drop and dust holding capacity. This design ensures optimum performance, low average pressure drop, and a long filter life. The CAMGT 3V-440 is available in different efficiency ratings, including F7, F9, E10, E11, and E12. It can also be equipped with CamBrane media in E12 efficiency.
Additional features include a hot-melt separator, polyurethane sealant, and a support grid for filter media. The recommended final pressure drop is 600 Pa, and the maximum airflow is 1.8 times the nominal flow. The filter can operate in environments with a maximum relative humidity of 100%. A reverse flow version with a support grid is available upon request.

Ensure that the installation location meets the specified requirements for safety and reliability.
Select the appropriate size of the CAMGT 3V-440 filter based on the dimensions provided (592x592x440).
Check the airflow requirements of your system and ensure that the filter’s maximum airflow (1.8 times the nominal flow) is sufficient.
Inspect the filter for any damage or defects before installation. Do not use a damaged filter.
Place the filter in the designated filter housing or mounting frame, ensuring that it fits securely.
Make sure the filter is properly aligned with the airflow direction indicated on the filter.
Seal the filter housing or mounting frame to prevent air leakage, using the provided polyurethane gasket if necessary.
Monitor the pressure drop across the filter regularly and replace it when the recommended final pressure drop (600 Pa) is reached.
If using the reverse flow version, ensure that the support grid is properly installed.
For additional information or special requests, refer to the manufacturer’s website or contact customer support.
Please note that specifications are subject to change without notice. Refer to the latest product documentation for up-to-date information. www.camfil.com

Application All installations where safety and reliability is crucial. Low air resistance, long life and high dust concentrations
Frame Plastic moulded;ABS
Gasket Polyurethane, endless foamed
Media Glass fiber
Separator Hot-melt
Sealant Polyurethane
Grille, Downstream Support grid for filtermedia
Rec. final pressure drop 600 Pa
Max airflow 1,8 x nominal flow
Max Temperature (°C) 70°C
Relative Humidity max 100%
Comment Reverse flow version: With support grid available on request Additional information: Also available in 1/2 and 3/4 size on request.
The CamGT 3V-440 is built on a solid 440 mm deep frame with extended media area. The unique design provides industry-leading pressure drop and dust holding capacity ensuring optimum performance, low average pressure drop and a long filter life. The filter is also available with CamBrane media in E12 efficiency.