Jabra OTE140R Elite 7 Active Wireless Earbuds User Manual
- June 1, 2024
- Jabra
Table of Contents
Jabra OTE140R Elite 7 Active Wireless Earbuds
Welcome
Thank you for using the Jabra Elite 7 Active. We hope you will enjoy it!
Jabra Elite 7 Active features
- Ultimate workout fit with Shake Grip™
- IP57-rated sweatproof protection
- Rich, powerful, personalized sound
- Adjustable Active Noise Cancellation (ANC) & Hear Through
- Up to 8 hours of battery, 30 with the case
Jabra Elite 7 Active Overview
Jabra Elite 7 Active
Wireless charging case
Included Accessories
Ear Gels
pre-mounted on the earbuds
How To wear
Insert each earbud into your ear and ensure the microphones are pointed
towards your mouth.
Changing Ear Gels
For the optimal audio and ANC experience, it is recommended to take the My Fit
test in the Sound+ app to ensure you have the best fit. If you don’t have a
good fit, try a different ear gel size. The fit should feel light and
comfortable and you may need a different size Ear Gel for each ear. The medium
Ear Gels are pre-mounted on the earbuds.
How To Charge
Get up to 8 hours on a single charge with ANC on, with a total charge of up to 30 hours with the charging case. If you use the earbuds without ANC and Hear Through, you’ll get even more battery, with up to 10 hours in the earbuds and a total of 35 hours with the charging case.
Charging The Earbuds
Place the earbuds in the charging case and close the lid. It takes up to 2.5
hours to fully recharge the earbuds.
When the charging case is opened, the LEDs on the earbuds will light up red,
yellow or green to indicate the battery status of the earbuds. The LED on the
front of the charging case indicates the battery status of the charging case.
Fast Charge The Earbuds
When the earbuds are at low battery, placing them in the charging case for 5
minutes will fast charge the earbuds and give up to 1 hour of battery. Fast
charging the earbuds requires that the charging case has a minimum of 30%
battery.
You can see the current battery status of the earbuds and charging case using
the Jabra Sound+ app.
Charging the charging case using USB
It takes up to 2 hours and 30 minutes to fully charge the earbuds and the
charging case using a USB-C charging cable.
The charging case uses the standard USB voltage of 5V +- 0.25V. It is not
recommended to charge the earbuds using a power supply with a higher voltage.
Charging the charging case using the Jabra wireless charging pad
The charging case is Qi-certified. Place the charging case in the center of
the Jabra wireless charging pad. The LED on the charging case will flash to
indicate the charging case is placed correctly. It takes up to 2 hours and 30
minutes to fully charge the earbuds and the charging case.
What The LEDs Mean
EARBUD STATUS
High battery
Medium battery
Low battery
Power on
Power off
Pairing
Resetting
BATTERY STATUS WHEN OPENING CHARGING CASE
High battery
Medium battery
Low battery
Critically low battery (earbuds not charging)
CHARGING CASE STATUS WITH USB CABLE
High battery
Medium battery
Low battery
Fully charged
Firmware updating
Firmware update error (see Section 7.16)
CHARGING CASE STATUS WITH WIRELESS CHARGING PAD
High battery
Medium battery
Low battery
Firmware updating
Firmware update error (see Section 7.16)
Note: When fully charged, the LEDs on the charging case and wireless charging pad will turn off.
How To Pair
Pairing With A Mobile Device
- Power on the earbuds by removing them from the charging case. Alternatively, press the Left and Right buttons simultaneously to power the earbuds on.
- Press and hold (3 sec) the Left and Right buttons simultaneously until the earbud LEDs flash blue. The earbuds will now be ready to pair to your phone.
- Wear the earbuds and follow the voice guided pairing instructions to pair to your mobile device.
How To Use
Power The Earbuds Off/On
To power off the earbuds, place them in the charging case.
To power on the earbuds, remove them from the charging case.
Alternatively, the earbuds can be manually powered off by pressing the
Left and Right buttons on the earbuds simultaneously. To power on,
press and hold (1 sec) the Left or Right buttons to power on each
earbud individually.
Music Controls
| Left earbud | Function | Right earbud |
|---|---|---|
| Play/pause music | Press the Right button when not on a call | |
| Volume up | Press and hold the Right button | |
| Press and hold the Left button | Volume down | |
| Next track | Double-press the Right button when listening to music | |
| Restart track or previous track | Triple-press the Right button when |
listening to music
Repeat to skip to the previous track
All button functions can be reassigned using My Controls in the Jabra Sound+ app.
Call Controls
| Left earbud | Function | Right earbud |
|---|---|---|
| Press the Left or Right button | Answer call | Press the Left or |
Right button
Double-press the Left or Right button| End/Reject call| Double-press
the Left or Right button
Press the Left or Right button| Mute/unmute microphone| Press the
Left or Right button
| Volume up| Press and hold the Right button
Press and hold the Left button| Volume down|
All button functions can be reassigned using My Controls in the Jabra Sound+ app.
ANC, Hear Through And Voice Assistant Controls
| Left earbud | Function | Right earbud |
|---|---|---|
| Press the Left button when not on a call | Cycle between Hear Through, ANC* | |
| and Of | ||
| Double-press the Left button when not on a call | Activate Voice assistant | |
| (Siri, Google Assistant, Amazon Alexa) |
All button functions can be reassigned using My Controls in the Jabra Sound+
app.
*ANC must first be configured using the Jabra Sound+ app.
Adjustable Noise Cancellation (ANC)
Active Noise Cancellation (ANC) counters noise by detecting and analyzing the
pattern of incoming sound and then generating an anti noise signal to cancel
noise out. As a result, you experience a reduced level of surrounding noise
during music.
Adjustable ANC must first be configured to your specific hearing profile using
the Jabra Sound+ app before it can be used.
Left button| ANC|
---|---|---
| Cycle between Hear Through, ANC and Of| Press the Left button when not
on a call
Hear Through
Hear Through lets you pay attention to your surroundings and engage in conversation, when not on a call, without needing to remove the earbuds. The microphones pick up surrounding sounds and transmit them to the speakers.
Left button| Hear Through|
---|---|---
| Cycle between Hear Through, ANC* and Of| Press the Left button when not
on a call
Hear Through can be adjusted using the Jabra Sound+ app.
*ANC must first be configured using the Jabra Sound+ app.
Side Tone
Side tone enables you to hear your own voice when you are on a call. The
benefit of Side tone is that it enables you to determine how loud you are
speaking.
Side tone is on by default during calls and can be turned on/off using the
Jabra Sound+ app.
By default, Side tone on/off cannot be controlled using the earbuds. However,
it can be added to the earbuds using My Controls in the Jabra Sound+ app.
Mono Earbud Use
The right or left earbud can be used individually for music playback or for calls. To activate mono earbud mode, place the unused earbud into the charging case.
| Left button | Left earbud only |
|---|---|
| Cycle between Hear Through, ANC* and Of | Press the Left button when |
listening to music
Answer call| Press the Left button
End/Reject call| Double-press the Left button
Mute/unmute microphone| Press the Left button when on a call
Activate Voice assistant| Double-press the Left button when not on a call
Adjust volume| Use the volume controls on the connected mobile device
*ANC must first be configured using the Jabra Sound+ app.
| Right button | Right earbud only |
|---|
| Play/pause music| Press the Right button when listening to music
Answer call| Press the Right button
End/Reject call| Double-press the Right button
Mute/unmute microphone| Press the Right button when on a call
Next track| Double-press the Right button when listening to music
Restart track or previous track| Triple-press the Right button when
listening to music
Repeat to skip to the previous track
Adjust volume| Use the volume controls on the connected mobile device
The left and right earbuds will automatically relink when both are placed in your ears.
Auto-pause Music And Calls
When one of the earbuds is removed from your ear, music will automatically
pause.
To resume the music, return the earbud to your ear within 60 seconds. After 60
seconds, the music can be manually resumed by pressing the Right button.
Sleep Mode
To conserve battery, the earbuds will automatically power off when they are
out of range of your mobile device for 15 minutes and are not in the charging
case, or when they have been inactive for 30 minutes.
To exit sleep mode, press and hold (1 sec) the button on each earbud.
Alternatively, place the earbuds in the charging case and then remove them
from the charging case.
Sleep mode can be configured in the Jabra Sound+ app.
My Controls
My Controls is a feature in the Jabra Sound+ app that enables you to reassign
any function to each of the earbud buttons, offering you the flexibility to
configure the earbuds precisely to your personal preference.
By default, the functions listed below cannot be controlled using the earbuds,
however these functions can be added to the earbuds using My Controls in the
Jabra Sound+ app.
- Side tone on/off
- Hold current call and answer incoming call
- Switch between held call and current call
Multiple Call Handling
The earbuds can accept and handle multiple calls at the same time.
Multiple call handling
| End current call and answer incoming call| Press the Left or Right
button
Reject incoming call, when on a call| Double-press the Left or Right
button
Voice Assistant
| Right button | Voice assistant |
|---|---|
| Activate Siri, Google Assistant, Amazon Alexa (device dependent) | Double- |
press the Left button when not on a call
Voice assistant settings can be configured using the Jabra Sound+ app.
Voice guidance and languages
Voice guidance can be turned on/off and the language can be changed using the
Jabra Sound+ app.
The following languages are available: English, French, German, Japanese,
Mandarin Chinese, Korean.
Update firmware
The Jabra Elite 7 Active can be updated to the latest firmware version using
the Jabra Sound+ app.
If notifications are enabled in the Jabra Sound+ app, you will receive an
automatic notification when a firmware update is available.
If an error occurs during the firmware update, the LED on the charging case
will flash red. To complete the update, connect the charging case to a power
supply, remove the earbuds from the charging case and then place the earbuds
back in the charging case and close the lid. The firmware update will restart.
Reset the earbuds
Resetting the earbuds clears the list of paired devices and resets all settings.
- Place both earbuds in the charging case.
- Press and hold (10 sec) the Left and Right buttons on the earbuds simultaneously until the LEDs on the earbuds flash pink.
- Close the lid of the charging case for 5 seconds to complete the reset.
The earbuds will need to be re-paired to your mobile device. Remember to delete/forget the pairing in the Bluetooth menu on your mobile device.
Jabra Sound+ app
Jabra Sound+ app
Personalize your music with My Sound
Customize ANC, Hear Through and My Controls
Register your 2-year warranty
Support
FAQ
View the FAQs on Jabra.com/help/elite7
How to care for your earbuds
- Always store the earbuds in the charging case and safely protected.
- To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions.
- It is recommended to store the earbuds between -20°C and 45°C (-4°F and 113°F).
- Do not store the earbuds for extended periods of time without recharging them (max. three months).
- If the earbuds or the charging case become dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water.
- The charging case uses the standard USB voltage of 5v +- 0.25v. It is not recommended to charge the earbuds using a power supply with a higher voltage.
Replacement accessories
Replacement or additional accessories can be purchased online at jabra.com/accessories.
Left and right earbud set
Jabra wireless charging pad
USB charging cables
Using replacement earbuds
- Place the replacement earbuds into the charging case and close the lid.
- Open the charging case lid and remove the earbuds.
- Wear the earbuds and follow the voice instructions to pair to your mobile device.
- Update the earbud firmware using the Jabra Sound+ app.
Using a replacement charging case
Before using a replacement charging case for the first time, it will need to
be synced with your current earbuds and charged for 1 hour.
To begin syncing, place your current earbuds inside the replacement charging
case and close the lid for 10 seconds. If the LED on the charging case flashes
pink this indicates that the firmware is being updated. Please wait until the
LED stops flashing pink before opening the charging case.
© 2021 GN Audio A/S. All rights reserved. Jabra ® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.
MODEL: OTE140R / OTE140L / CPB140
Declaration of Conformity can be found on
www.jabra.com/doc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>