AJAX 5288 GlassProtect Wireless Glass Break Detector User Guide

AJAX 5288 GlassProtect Wireless Glass Break Detector

GlassProtect is a wireless detector detecting glass breaks at a distance up to 9 meters. GlassProtect is connected to the Ajax security system via the protected Jeweller protocol, with an effective communication range of up to 1,000 meters without obstacles. It can operate up to 5 years from a battery and is designed for use indoors.
IMPORTANT: This Quick Start Guide contains general information about GlassProtect. Before using the device, we recommend
to reviewing the User Manual on the website:
ajax.systems/support/devices/glassprotect

FUNCTIONAL ELEMENTS

1. Light indicator.
2. Microphone hole.
3. SmartBracket attachment panel.
4. External detector connection socket.
5. QR code.
6. Device switch.
7. Tamper button.

CONNECTING AND SETTING UP

The detector is connected to the hub and set up via the Ajax Security system mobile application. To establish a connection please locate the detector and the hub within the communication range and follow the device adding procedure. A wire detector with an NC type of contact may be connected to the GlassProtect using an outside-mounted terminal clamp. To lead out the wire from the GlassProtect body, break out the plug. Before using the external detector connected to the terminal clamp, activate it in the GlassProtect settings.  To connect the detector to a third-party security central unit using the Ajax cartridge or Ajax Oxbridge Plus integration module, follow the recommendations in the user manual of the respective device.If the detector is located in a room requiring 24-hour control, activate the “Always active” mode – GlassProtec will be actuated in case of any detected glass break, even if the system is not in the arming mode.

LOCATION SELECTION

In selecting the GlassProtect installation location, please take into account the glass break detection range and the presence of any objects within the room, which hinder the sound and radio signal transmission.

Do not install the detector:

1. Outside the premises (outdoors).
2. Nearby sirens and annunciators.
3. In a draught and in places with a rapid air circulation (air fans).
4. Nearby any metal objects and mirrors causing radio signal attenuation or screening it.
5. Within any premises with the temperature and humidity beyond the range of permissible limits.

Prior to the attachment of the detector to a surface with screws, please perform signal strength test as well as detection area test in the Ajax Security System application for at least a minute. This will demonstrate communication quality between the detector and the hub and ensures proper installation place selection.

GlassProtect is set up to detect the distinctive sound of broken glass, consisting of a low-frequency hit and high-frequency tinkle of chips. The detector is not sensitive to any pops. The GlassProtect detector microphone should be positioned at an angle no more than 90 degrees relative to the window(s). Make sure that any curtains, plants, furniture or other objects do not overcover the microphone hole. If the window is covered by thick curtains, place the detector between them and the window.

MOUNTING THE DEVICE

1. Fix the SmartBracket panel on the surface in two fixing points using the bundled screws or other no less reliable attachment hardware.
2. Put the detector on the panel – single blink of the light indicator will confirm that the tamper has been actuated.them and the window.

IMPORTANT INFORMATION

This product can be used across all EU member states. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

TECH SPECS

• Sensitive element Electret microphone
• Glass break detection distance Up to 9 m
• Microphone coverage angle 180°
• Anti-tamper switch Yes
• Frequency band 868.0-868.6 mHz
• Maximum RF output power Up to 20 mW
• Modulation FM
• Radio signal Up to 1,000 m (any obstacles absent)
• Socket for connecting wire detectors Yes, NC
• Power supply 1 battery CR123A, 3 V
• Battery life Up to 5 years
• Operating temperature range From 0°С to +50°С
• Operating humidity Up to 90%
• Overall dimensions Ø20х90 mm
• Weight 30 g

COMPLETE SET

1. GlassProtect.
2. Battery CR123A(pre-installed)
3. Installation kit.
4. Quick Start Guide.

WARRANTY
Warranty for the Ajax Systems Inc. devices is valid for 2 years after the purchase and does not apply to the supplied battery. If the device does not work correctly, you should first contact the support service—in half of the cases, technical issues can be solved remotely!
The full text of the warranty is available on the website:
ajax.systems/ru/warranty
User Agreement:
ajax.systems/end-user-agreement
Technical support:
support@ajax.systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>