axis HD1014 Quad HD Touchscreen Colour Monitor Instruction Manual
- June 5, 2024
- AXIS
Table of Contents
axis HD1014 Quad HD Touchscreen Colour Monitor
SPECIFICATIONS
- TFT Panel: New Grade A LCD, LED Backlight
- Touchscreen: Yes, Capacitive Touch
- LCD Size: 7” (HD264), 10.1” (HD1014) Diagonal
- Display Format: 16:9
- Resolution: 1024 x 600
- Brightness: < 450 CD/M2 (HD264), < 500 CD/M2 (HD1014)
- Views: 1/2/3/4 Selectable
- Viewing Angles : 75 Deg. Left/Right/Up/Down
- Video System: PAL/NTSC Select
- Video Connections: 4 x 4-Pin (Male) / VGA
- Camera Display: Input Select and Reverse Trigger Override
- Reverse Trigger: 5 Triggers
- Monitor View: Normal/Mirror Image Select
- Guidelines: Selectable & Adjustable
- Audio: On Board Speaker
- OSD Languages: 9
- Main Menu: Brightness/Contrast/Colour/Volume/Reset/Autoscan/Language/Reverse Priority
- Temp Resistance: +70°C
- Power Input: 10-32V DC (Negative Ground)
- Dimensions: HD264 203W x 112H x 28D mm (excluding bracket)
HD1014 267W x 159H x 30D mm (excluding bracket)
INCLUDED U-Bracket, Stand Mount, Power Cable Assembly, Sunshade
(Optional: Glass Mount Bracket – BKT102)
Precautions
Storage and Keeping
- Do not expose the monitor to excessive heat or cold. Storage temperature is -30 ~ +70°C; Operating temperature is -20 ~ +70°C; Battery operating temperature is 0-70°C; Humidity is Rh90%.
- Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or similar places.
- Never use this device in environment with excessive moisture, dust or smoke.
- Avoid dropping or striking.
- Never use this device in enclosed spaces, areas with excessive vibration or subject to severe impacts.
- Never puncture, scratch or use abrasive cleaning materials on this device.
- Do not place cables where they may be pinched or stepped on.
- Leave at least a 50mm space between the monitor and walls, cabinets or other objects to allow adequate air circulation around the device.
- The monitor is not designed to be waterproof.
Operating Precautions
- The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
- Make sure all cables are connected properly. Observe polarity. Improper cable connections may damage the monitor. Remove the power cable connections when you do not intend to use
the device for an extended period.
Warning!
- High voltage is present within the monitor. Opening the monitor case should be done by professionals.
- Do not watch video while driving unless you are monitoring rear view camera display.
Special Notice!
Occasionally, a few highlights or dark spots may occur on the LCD screen. That is a very common phenomenon in active matrix display technology, and it does not necessarily indicate any defect or fault. Never try to repair this device by yourself. If any problem, please turn off the display at once and notify our company or authorized dealer. The monitor is a complex device. Any disassembly or modification may lead to damage and invalidate warranty.
Maintenance
- Remove all the cable connections from monitor before cleaning the device.
- Use mild household detergent to clean the device with slightly damp, soft cloth.
- Never use strong solvents such as thinner or benzine.
Caution: Risk of electric shock
Do not open
Caution: to reduce the risk of electric shock, Do not remove cover (or
back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol is to call attention to the presence of uninsulated ”dangerous voltage” within the product’s enclosure, which may cause electric shock.
This symbol is to call attention to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance.
This symbol is to call attention to recycle disposal of electronic equipment.
Accessories
Connections
A: Camera 1 White 4 PIN Male
B: Camera 2 Blue 4 PIN Male
C: Camera 3 Green 4 PIN Male
D: Camera 4 Brown 4 PIN Male
E: Black 5 PIN Male
F: Black 5 PIN Female:
- Red: VCC 10-32VDC
- Black: GND
- White: Camera 1 Trigger
- Blue: Camera 2 Trigger
- Green: Camera 3 Trigger
- Brown: Camera 4 Trigger
- Yellow: Split Trigger
Basic functions of HD Quad-View Monitor
Specifications
- 7” or 10.1” HD quad-view monitor with LVDS interface, supports high resolution 1280*800.
- Supports 4 x camera inputs in 720P/1080P and multiple TV system like PAL/NTSC/HD-AHD/HD-TVI/HD-CVI, and 1080P video input.
- Image can be horizontally/vertically flipped, normal/mirror image. Menu characters remain the same while setting to mirror image.
- Support multiple image display modes like single, dual, triple, quad, trefoil, Y-split, H-split.
- Support 1 x VGA video input and resolution can be 1080P.
- Support 1 x CVBS video input for DVD, etc.
- Capacitive touch-screen.
- Support 5 x triggers. Trigger priority & trigger delay are selectable.
- Support auto scan. Scan channel and scan time are selectable.
- Support backlight adjustment manually in 3 levels and automatic.
- Parking line.
- With 1.5W speaker.
- Monitor operated by buttons, touch-screen.
- Support 9 languages OSD (English, German, Japanese, Russian, Chinese, Italian, Spanish, French, Dutch).
- Working voltage: 10-32V, with short circuit protection and short circuit alarm function.
- Compliance with CE/FCC/RCM standards.
INDUSTRY STANDARD PIN CONFIGURATION:
Menu Operation
Desktop
Desktop interface. When Home Menu does not pop up. Touch the White border
to pop up Home Menu. 
When signal source is selected to be cameras, image display mode can be
switched by sliding to left/right on screen. in the order:
LEFT->RIGHT->FRONT->BACK->DOUBLE->TRIPLE->TREFOIL-> Y-SPLIT->H
SPLIT->QUAD->LEFT. 
Touch the camera channel under split screen mode to zoom into a single full screen and touch it again to get back to split screen.
Home Menu
Home Menu is shown.
Touch the area out of the menu to get back to Desktop.
Volume
Directly drag the slider on the screen to adjust volume. Click speaker icon to turn on/off Mute.
Mode
Mode setting interface display mode selection
The corresponding screen display modes can be switched by touching the icons on OSD.
Source
Source interface signal source selecting is shown. Operation is as Mode menu.
Support automatic identification for signal output
Supports standard definition (NTSC \ PAL) and high definition format like AHD,
TVI and CVI; Supports resolution up to 1080P30Hz.
Multiple VGA input resolutions:
640×480, 720×480, 720×576, 800×600, 1024×768, 1280×720, 1280×1024, 1366×768,
1440×900, 1600×900, 1920×1080.
Setting
Setting menu interface for other functions. Operation is as Mode menu.
Camera
Camera menu settings for Camera channel
To set other channels, press Menu and move the cursor to the channel selection
area.
Press Up, Down, Left and Right to select the channel and press Sel to switch
to the corresponding channel for attribute settings. 
Camera Name setting interface setting for each channel’s name, Camera name can be 8 characters max.
Parking Line
Parking Line setting interface setting for reverse grid.
Touch CALIBRATE icon to set reverse cursor.
Press SEL or touch TYPE1/TYPE2 on screen to switch reverse cursor mode and
drag the cursor directly to adjust.
Language
Language setting interface setting for system language.
Trigger
Trigger setting interface setting for trigger function.
Trigger delay range: 1~60s;
Trigger priority: 1~5;
Trigger function takes priority over Auto Scan function.
When there is trigger, signal source will be automatically switched to the
working Camera. It will switch back to the previous signal source after the
trigger ends.
Support standby triggers. 
Trigger Delay / Priority setting interface. 
Trigger Display setting interface setting for display mode of the fifth
trigger.
Trigger Display setting only acts on the fifth trigger wire. (split wire)
Auto Scan
Auto Scan setting interface.
Delay range: 1~60s
Power On
Power- On setting interface power-on screen display mode setting.
Power On setting only acts when the power-on signal source is the Camera.
Standard
Standard setting interface.
TV system setting in split-screen display mode. 
The standard setting is only for split screen display modes.
Split screen display mode supports camera inputs with different resolutions.
When the camera input resolution is lower than the size of the corresponding
split screen, it will be centered and displayed in the original scale.
Conversely, it will zoom out to be split screen in full format.
NTSC Camera of standard definition only displays in NTSC, 720P60Hz, and
1080I60Hz, PAL Camera only displays in PAL, 720P50Hz and 1080I50Hz.
System
System setting interface.
When Menu Lock is set ON, screen touch control will be disabled. Menu Lock
also can be enabled/disabled by pressing the power button on the monitor for 3
seconds while menu is off.
WARRANTY
Congratulations on your purchase of a quality axis Mobile Safety System! You’re joining thousands of satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty. This warranty covers faults through component failure or failure of the product to operate in accordance with published specifications. Product failure as a result of unreasonable environmental conditions, accident, misuse, improper installation, unauthorised repair, vehicle electrical or wiring faults or neglect etc, will not be covered by this warranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of this product or any form of consequential loss.
CONSUMER WARRANTY
This product is warranted by AudioXtra International Pty Ltd to be free from defects in materials and workmanship under NORMAL USE for a period of TWENTY FOUR MONTHSs from the date of purchase.
WITHIN 30 DAYS OF PURCHASE DATE: Please return the unit for a replacement to our National Service Centre or the Retailer from where you made the purchase. All accessories must be included. Proof of purchase date must accompany the products.
AFTER 30 DAYS OF PURCHASE DATE: Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorized center concerned with this repair. This proof should take the form of either:
- The warranty card accompanying this product is stamped and dated by the dealer.
- A Tax Invoice or Receipt showing full details of the original vendor, purchaser, model number, and serial number.
COMMERCIAL WARRANTY: A product used in or associated with a commercial application will carry a limited SiX MONTH warranty. An abnormal commercial application is one where usage, dust, vibration, heat/cold and other environmental conditions exist at an extreme level.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure. 
National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 Australia
Telephone: (02) 8841 9000 Fax: (02) 9636 1204
email: services@audioxtra.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>