Bailey 145874 LED Charge&Go Decoration Table Lamps Instruction Manual

: June 13, 2024
: Bailey

Table of Contents

Technical specifications
Maintenance – Environment
Documents / Resources

MANUAL
CHARGE&GO Rechargeable LED Table Lamp

Technical specifications

Operating voltage: 5V DC
Battery capacity: 2000mAh
Charging time: 5 hours
Operating time with fully loaded battery: 6-10 hours
USB-C cable: 0.8m
IP54 splashproof
CLIII

User instructions

Determine the height (38cm or 26cm) by choosing the long or short tube (both included). To adjust the height, unscrew tube and change to other version.
Connect the USB cable to power bank, computer or adapter for charging.
Fully charge before first use and use the included USB-C cable.
When charging, the indicator light is red and turns green once fully charged.
Short press touch-switch on top of the table lamp to turn on the light.
Press and hold the touch-switch to gradually adjust light intensity.
Short press touch-switch again to switch of the lamp.

Bailey 145874 LED Charge&Go Decoration Table Lamps -
specifications

Warnings

Suitable for indoor and outdoor use.
Not suitable for use in extreme conditions (high temperatures and water).
LED light source is not replaceable.
Only charge the lamp in dry indoor location.
Do not turn on the light when charging.
Do not use a modified or damaged charger.
Do not overcharge the lamp. Pull the power plug if nobody is around for a longer period.
Do not disassemble the lamp and do not replace the batteries.
Recharge the lamp at least once every month to prolong battery life.
Only use certified USB adapters for charging (output 5V).
This device utilizes a rechargeable Lithium battery that can rupture, ignite and cause serious injury if being used improperly.

Bailey 145874 LED Charge&Go Decoration Table Lamps - light
source

Maintenance – Environment

In order not to adversely affect the service life, it is advisable to clean the fixture on a regular basis. Only use a soft cloth and water. Avoid exposure to volatile chemical substances such as alcohol, petrol or pesticides.
Electrical products may not be disposed of in the same way as normal household waste. Take the table lamp to a place where it can be recycled. Consult the local authorities or the seller for advice about collection and processing.

Bailey 145874 LED Charge&Go Decoration Table Lamps -
light

Warranty
The warranty period will begin on the day on which the product was purchased from Bailey and will end after 2 years. If a defect occurs within the warranty period as a consequence of material faults and/or manufacturing errors, Bailey will replace the product. The warranty does not cover consequential damage, nor will any call-out charges, transport costs or installation costs be reimbursed. The warranty does not apply if:

There is no information, or there are no documents, referring to the date of purchase (invoice or delivery note).
The model and/or serial number located on the product is unrecognizable (include photo of product sticker or imprint with specifications).
The defect was caused by improper use of the product or use not as intended, or by use in extreme conditions or in conditions involving harmful substances.
Damage to the product was caused by external factors.
The fixture is modified.

Bailey Electric & Electronics bv
Everdenberg 21 – 4902TT Oosterhout
The Netherlands
+31 (0)162 52 2446
www.bailey.nl

Documents / Resources

| Bailey 145874 LED Charge&Go Decoration Table Lamps [pdf] Instruction Manual
145874 LED Charge Go Decoration Table Lamps, 145874, LED Charge Go Decoration Table Lamps, Charge Go Decoration Table Lamps, Decoration Table Lamps, Table Lamps, Lamps
---|---