EVERBILT IM-3-46391PHLHD White Single Track Steel Upright User Guide
- June 13, 2024
- Everbilt
Table of Contents
EVERBILT IM-3-46391PHLHD White Single Track Steel Upright
Safety Information
WARNING: For more secure application mounting to wall stud is recommended. Ensure mounting is stable and strong enough to support intended weight. If mounting to surfaces other than wood, use appropriate hardware. Hollow wall installation is not recommended.
TOOLS REQUIRED
-
Power drill
-
Stud finder
-
Tape measure
-
Rubber mallet
-
Phillips screwdriver
-
Pencil
-
Level
INSTALLATION HARDWARE
Brackets, shelves and hardware are sold separately
| Description | Quantity | Quantity |
|---|
8 2 in. Screws
| ****| Upright Length
24 in.| 24 in.| 46/48 in.| 68 in.
Screw Qty| 3| 4| 5| 7
Installation
LOCATING WALL STUD
- Mark locations on the wall studs at the desired height.
- Use a level to ensure the holes are even horizontally.
SECURE 1 ST UPRIGHT
- Secure 1st upright to wall studs using #8 2 in. screws.
LEVEL THE NEXT UPRIGHT HORIZONTALLY
- Mark holes. Max spacing 16 in. from center to center of upright.
- Repeat step 2 to secure 2nd upright to wall studs or drywall.
TAP THE BRACKET
- Place the bracket horizontally into the upright and tap it tight with rubber mallet.
- Confirm the bracket is at the same height on each upright to ensure the shelf will be level once installed.
ADDING THE SHELVES
- Check that all brackets are level and place the shelf onto them.
- Secure the shelves to the brackets.
HOMEDEPOT.com
Please contact 1-877-527-0313 for
further assistance.
Read User Manual Online (PDF format)
Loading......