Televes 237411 WideBand LNB and Optical Transmitter Kit User Manual

Televes 237411 WideBand LNB and Optical Transmitter Kit

Product Information

• Product Name: ES Conversor LNB WIDEBAND + TX 1550nm FC/UPC 8 dBm
• Model Number : Ref. 237411, Art.Nr. KLT1550
• Safety Class: Class 1M Laser
• Product Maximum Output: 8 dBm
• Emitted Wavelength : 1550nm

Product Usage Instructions

•  Read and keep the user manual for future reference.
• Install the converter according to the manufacturer’s instructions.
• Ensure that the converter is not installed near heat sources such as radiators, heat registers, or stoves.
• Do not block any ventilation openings of the converter.
• Clean the AC/DC adaptor with a dry cloth only.
• Do not expose the AC/DC adaptor to rain or moisture.
• Avoid direct contact with laser radiation emitted by the product.
• Do not watch the laser beam directly with optical instruments such as binoculars or magnifying glasses.
• The product complies with EN 60825-1:2014 safety standards.
• The complete kit includes a TX 1550nm (DAB/VHF/UHF/SAT) FC/UPC 8 dBm.

Please refer to the user manual for detailed technical specifications and satellite input frequencies.

Converter WIDEBAND + TX 1550nm FC/UPC 8 dBm

Important safety instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean the AC/DC adaptor only with a dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the AC/DC adaptor, the the AC/DC adaptor has been exposed to rain or moisture, does not operate normally, or has been dropped.

Warning

• Reduce the risk of fi re or electric shock, do not expose this AC/DC adaptor to rain or moisture.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the AC/DC adaptor .

Safe operation

• Power requirements for the AC/DC adaptor are 100-240V~ 50/60 Hz.
• Should any liquid or object fall into the AC/DC adaptor, please refer to qualifi ed personnel for service.
• To disconnect the equipment from the mains pull the plug never the cable.
• It is strongly recommended not to connect the equipment to the mains until all connections have been done.
• Do not connect the equipment to the mains until it has been screwed to the wall.
• The socket outlet shall be installed near the equipment and shall be easily accessible. Do not take the cover off the equipment without disconnecting it from the mains.

Safe installation

• For the AC/DC adaptor, ambient temperature should not be higher than 113°F. Do not place the equipment near heat sources or in a highly humid environment. Do not place the equipment in a place where it can suffer vibrations or shocks. Please allow air circulation around the equipment.
• Do not place naked flames, such as lighted candles on or near the product.

Safety measures
Warning
This product emits an invisible laser beam. Avoid contact with laser radiation. The use of equipment such as binoculars or magnifying glasses may increase damage caused to the eyes.

Caution

• The use of controls or adjustments, as well as different procedures beyond those specified in this manual could result in exposure to harmful radiation.
• Read and follow the instructions in this manual very carefully, keep this manual for future reference.
• Do not use the equipment in a way that does not conform to these operating instructions or under any condition that exceeds the indicated environmental specifications.
• The user cannot service this equipment. For technical assistance, contact our technical assistance department.
• The laser beam should not be pointed at people and/or animals.

TX 1550nm (DAB/VHF/UHF/SAT) FC/UPC 8 dBm

Complete kit includes

• LNB with Wide Band Output (H/V)
• RF to optical converter
• AC/DC adaptor with European and UK mains plug
• Caps

SATELLITE
Input Frequency WideBand (H/V)|

MHz

|

290… 2340

Impedance| Ω| 75
Gain Variation across input frequency bandW|

dB

|

3 (1)

Gain ripple in 28 MHz

|

dB

|

1

Input Power| dBuV| 70… 85 (2)

Input AGC

|

dB

|

15

DAB/VHF/UHF| |
Input frequency| MHz| 88… 694

Gain ripple (8 MHz BW)

|

dB

|

0,5

Noise Figure (max gain)| dB| 10
ELECTRICAL| | Conversor de RF a FO RF/OPT converter Opt. Sender
Input voltage| V| 20
Current consumption| mA| 350 (3)
Output Voltage Terrestrial and Vertical| V| 12
Output Voltage Horizontal| V| 18
Maximum Upstream current| mA| 500 (4)
Maximum upstream Current

RF input

| mA| 250ma (5)
Operating Temperature range| ºC| -20…+60
Operating Storage range| ºC| -40…+70
MECHANICAL| |
Satellite Input connector| Type| “F” female
DAB/VHF/UHF connector| Type| “F” female
Power supply connector| Type| “F” female
Optical connector| Type| FC/UPC
Protection level| IP| 65
Weight| gr| 435g
Dimensions(W x H x D)| mm| 162x163x25

OPTICAL

| | Conversor de RF a FO RF/OPT converter Opt. Sender
Optical Power| dBm| +8
Optical Wavelength| nm| 1550 ± 20
Maximum Splitting| | 1:32

Typical application

Notes:
Max 32 optical converters (236903/237003)
In case of only terrestrial use, it is needed to power up the QUAD/
QUATTRO converter with an external power supply
It is needed to %lter out unwanted signals in the headend: Noise, 4G/5G services
Install the LNB and the RF/OF converter directly in the mast with a minimal separation

LNB Wide Band (H/V) / Wideband LNB (H/V)

Phase Noise

| dBc/ Hz| -50 @ 1KHz
-75 @ 10 KHz
-90 @ 100 KHz
LO frequency stability| MHz| -0,8…+0,8
Output return loss| dB| 8 min
XPOL rejection (typ)| dB| 30
Input voltage| V| 8-21
Current consumption (max)| mA| 125
Outputs Connectors| | 2 X “F”
Weight| gr| 106
Operating Temperature| ºC| -30…+60
Dimensions (width x high x deep)| mm| 60 x 60 x 100,2

Optical Fiber Splitters

Technical specifications| | 235701

OVT2N

| 235801

OVT3N

| 235901

OVT4N

| 236001

OVT8N

---|---|---|---|---|---
Outputs| nº| 2| 3| 4| 8|
Connector female-female| Type| FC/PC|
Fiber| Type| اﻟﻮﺿﻊ اﻟﺒﺴﻴﻂ / simple modo / Monomode

single – mode

|
Coupling ratio| %| 50/50| 3 x 33,3| 4 x 25| 8 x 12,5|
Wave lenght| nm| 1310/1550|
Wave lenght Bandwidth| ****

nm

| ****

± 40

|

Insertion loss

| dB (typ.)| ****

4

| ****

5,5

| ****

7

| ****

10,1

|

Optical Attenuators

__ Technical specifications| 2364

ODG5

| 2365

ODG10

| 2366

ODG15

|
---|---|---|---|---
Connectors male-female| Type| FC/PC
Wave lenght| nm| 1310/1550

Insertion loss

| dB (typ.)| ****

5

| ****

10

| ****

15

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>