dji OSMO Mobile 6 Gimbal User Manual

June 4, 2024
DJi

OSMO Mobile 6
User Manual
v1.0 2022.09

dji OSMO Mobile 6 Gimbal

OSMO Mobile 6 Gimbal

Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to
that section.
Printing this Document
This document supports high-resolution printing.
Using this Manual
Legend
Important
Hints and Tips
Before Use
Read the following documents before using DJITM OSMO Mobile 6:

  1. Safety Guidelines
  2. Quick Start Guide
  3. User Manual

dji OSMO Mobile 6 Gimbal - qr codehttps://s.dji.com/guide38

It is recommended to watch all tutorial videos on the official DJI website (www.dji.com/osmo-mobile-6/video) or in the DJI Mimo app. Read the safety guidelines and quick start guide before using it for the first time. Refer to this user manual for more information.
Downloading the DJI Mimo App
Scan the QR code above to download the latest version of the DJI Mimo app.
The iOS version of DJI Mimo is compatible with iOS v12.0 and later. The Android version of DJI Mimo is compatible with Android v8.0 and later.

Introduction

Boasting 3-axis stabilization and a built-in extension rod, the lightweight Osmo Mobile 6 unlocks the full potential of your mobile phone. The foldable magnetic design makes setup easier than ever, transportation and storage more convenient, and it can power on automatically once unfolded. Osmo Mobile 6 can be operated in both portrait and landscape, while the upright, underslung, side grip and low position modes help capture the perfect shot. Take content to the next level through DJI Mimo with ActiveTrackTM 5.0, DynamicZoom, and Pano. The Story mode, Timelapse, and ShotGuides provide step-by-step tutorials according to the scenario and help generate a video that can be shared on social media.
Overview

dji OSMO Mobile 6 Gimbal - Overview

1. Magnetic Phone Clamp 3
2. Magnetic Alignment
3. Pan Motor
4. Status Panel
5. Side Wheel
6. Joystick
7. 1/4″-20 UNC Port
8. Switch Button| 9. Shutter/Record Button
10. Power/M Button
11. Tilt Motor
12. Roll Motor
13. M3×0.5 Screw Hole
14. Charging Port (USB-C)
15. Trigger
---|---

Osmo Mobile 6 is compatible with DJI OM Fill Light Phone Clamp and DJI Mic, which can be purchased in the DJI Store.

Getting Started

Charging
To charge Osmo Mobile 6, connect a USB adapter (not included) to the charging port using the power cable. The battery is fully charged when the battery level indicator turns off on the status panel. Charging time: approx. 1 hour 24 minutes (tested in the environment temperature of 25° C when using a 10 W charger) Max runtime: approx. 6 hours and 24 minutes (tested with the gimbal balanced and held steadily. This value should be taken as a reference only)

dji OSMO Mobile 6 Gimbal - Charging

Attaching the Phone

  1. Unfold the gimbal as shown. Osmo Mobile 6 will power on automatically once unfolded.
    dji OSMO Mobile 6 Gimbal - Phone

  2. Attach the magnetic phone clamp in the center of the phone. The magnetic phone clamp can be stretched to adapt to the mobile phone’s width. The camera mark should point towards the camera of the phone.

  3. Align the marks on the phone clamp and the phone clamp mounting plate. Attach the mobile phone to Osmo Mobile 6. Osmo Mobile 6 will stabilize once the gimbal mode indicator lights up on the status panel.
    dji OSMO Mobile 6 Gimbal - 1 Magnetic Phone Clamp Tips Make sure the direction of the magnet phone clamp is the same as shown in the figure above. For optimal performance, make sure the magnetic phone clamp is in the middle of the mobile phone, and the distance between the clamp arms is the same.
    dji OSMO Mobile 6 Gimbal - 2The anti-slip pads help to secure the mobile phone and the magnetic phone clamp. Attach the anti-slip pad to the magnetic phone clamp as shown in the figure below and press down firmly.
    The status indicator on the status panel will pulse red if the magnets are not aligned. Adjust the position of the magnetic clamp in that case.

  4. The built-in extension rod can be extended to up to 215 mm and the angle can be adjusted from 0 to 90°.
    dji OSMO Mobile 6 Gimbal - 4

Using Osmo Mobile 6

On-board Features
Status Panel
Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode.
System Status Indicator Descriptions

Blinking Pattern Descriptions
Pulses red Magnetic is not aligned
Solid yellow Bluetooth disconnected
Solid green Bluetooth connected
Pulses are yellow or green Standby mode
Blinks red and green alternately Firmware updating/firmware update failed
Solid red Abnormal status detected

Battery Level Indicator Descriptions

Blinking Pattern Battery Level
Blinks red quickly 55%
Solid red 6%-19%
Solid yellow 20%-60%
Solid green >60%

Gimbal Mode
Follow: pan and tilt axes follow, where both the pan and tilt axes follow the movement of the grip. Suitable for scenarios when moving up and down or on a slant.
Tilt Locked: only the pan axis follows, where only the pan axis follows the movement of the grip. Suitable for scenarios such as arc shots or moving from left to right.
FPV: pan, tilt, and roll axes follow, where all three axes follow the movement of the grip. Suitable for shooting the first-person view.
SpinShot: pan, tilt, and roll axes follow. The joystick can be used to control the roll axis rotation. SpinShot enables footage to be shot while rotating the camera 360°. This is suitable for shooting push, pull, and down.
dji OSMO Mobile 6 Gimbal - icon7Button
When powered off
With the gimbal folded, press once or press and hold: check the battery level With the gimbal unfolded, press once: power on
When powered on
Press once: switch between gimbal modes Press three times: enter standby mode (press any button to exit) Press and hold: power off. Press and hold for 20 seconds to force power off
Side Wheel
Press once: switch between focus and zoom Rotate: control focus or zoom
Joystick
Moves vertically and horizontally to tilt and pan the mobile phone. The joystick control direction can be set in Oil Mimo. Use the joystick to navigate through settings on the Quick Settings page.
Shutter/Record Button
Press once: take a photo or start or stop recording. Press and hold: for burst shooting when in photo mode.
Switch Button
Press once: switch between front and rear cameras. Press twice: switch between landscape and portrait mode. Press three times: switch between photo and record mode. The feature can be set to control Quick Settings in DB Mimo.
dji OSMO Mobile 6 Gimbal - 8 Trigger
Press once to start or stop ActiveTrack 5.0 (requires use with Mimo). Press twice to recenter the gimbal. When using ActiveTrack 5.0, the gimbal will recenter to the center of the camera view. Press once, and then press and hold to adjust the follow speed to fast mode, release to exit. Press and hold to enter lock mode. In lock mode, the gimbal will not follow the handle movements. Release to exit lock mode.

Charging Port (USB-C)
Charge Osmo Mobile 6 by connecting a USB adapter to this port.
1/4″-20 UNC Port
The 1 /4″-20 UNC port can be used to attach a tripod.
M3x0.5 Screw Hole
Used to mount counterweights. Counterweights should be used if a camera lens or microphone is mounted on the mobile phone. Make sure the total weight of these accessories is less than 290 g.
dji OSMO Mobile 6 Gimbal - 12 Combination Operation
Press the switch button, shutter/record button, and trigger simultaneously for more than one second to reset the Bluetooth name and connection and reconnect.
Osmo Mobile 6 will be powered off automatically if there is no operation for three minutes in standby mode.
Operating Mode
Operation modes apply when used in portrait and landscape modes.
Upright Mode
An upright mode can be used without any further user input. In this mode, press the trigger twice quickly to center the mobile phone.
dji OSMO Mobile 6 Gimbal - 13 Side Grip Mode
Rotate Osmo Mobile 6 to the right or left by 90° to go from Upright to Side Grip mode. Press the trigger twice to center the mobile phone.
dji OSMO Mobile 6 Gimbal - 15 Underslung Mode
Hold Osmo Mobile 6 upside down to enter Underslung mode, in which the mobile phone can easily capture images from a lower position. Press the trigger twice to center the mobile phone.
dji OSMO Mobile 6 Gimbal - 14
Low Position Mode
Extend the built-in extension rod and adjust the angle to Low Position mode. Use Low Position mode to shoot from a low angle.
dji OSMO Mobile 6 Gimbal - 16

DJI Mimo App

Watch a live HD video feed on your mobile phone screen through the DI Mimo app. The app also allows you to use ShotGuides, Story mode, Hyperlapse, timelapse, ActiveTrack 5.0, DynamicZoom, and Pano, or configure the camera and gimbal settings in just a few taps.
dji OSMO Mobile 6 Gimbal - 17 Device: tap to connect to Osmo Mobile 6. Once connected, DJ! Mimo enters the camera view.
Academy: tap to watch tutorials and view manuals. Scan the QR code on the gimbal to access Academy directly.
Al Editor provides several templates to edit photos or videos.
Home: tap to return to the home screen.
Album: manage and view footage from the phone or DJI devices.
Editor: tap to edit photos or videos from Osmo Mobile 6 or import and edit from a mobile device.
Profile: register or log in to a DJI account. Tap the setting icon to access more settings.
Connecting to the DJI Mimo App

  1. Power on Osmo Mobile 6.
  2. Enable Bluetooth on the mobile phone and connect to the device with an 0M6 prefix name in DJI Mimo.
  3. Users are required to allow access to certain information when using DJI Mimo for the first time. The exact information will be listed in the prompt. An internet connection is required. Osmo Mobile 6 will be activated after authorization and the app will enter the camera view.

When connected via Bluetooth, Osmo Mobile 6 is able to control the mobile phone camera without DJ! Mimo. Refer to the Mobile PhoneCompatibility List for details at www.dji.com/osmo-mobile-6 
Camera View

dji OSMO Mobile 6 Gimbal - Camera View

  1. Home:
    Tap to return to the home screen.

  2. ShotGuides:
    ShotGuides provides step-by-step shooting tutorials according to the scenario, users can edit the video using Al Editor.

  3. ActiveTrack Select Box ° :
    ActiveTrack 5.0 has been optimized for tracking subjects. The subject will remain in the center of the camera view by default. The camera view can be adjusted manually. There are three ways to use ActiveTrack 5.0:
    a. Drag a box on the screen in the camera view in DJ, Mimo. A green box around the subject indicates ActiveTrack 5.0 is successfully enabled. Tap the icon on the top corner to stop tracking.
    b. Enable Gesture Control and select “Follow and Shoot” in DJ! Mimo, and perform a palm or V gesture for one to two seconds when facing the camera. The gimbal will follow the subject closest to the camera. The detection range between the rear camera and the gesture is 0.5 to 4 m. Note that ActiveTrack 5.0 may consume more power and cause the temperature of the mobile phone to increase. Perform a palm or V gesture to stop recording.
    dji OSMO Mobile 6 Gimbal - 18c. Press the trigger once to start or stop ActiveTrack 5.0. The gimbal will follow the subject in the center of the screen by default. When using ActiveTrack 5.0 move the joystick to adjust the camera view.

  4. Gimbal Battery Level
    : Displays the current battery level of the gimbal.

  5. Mobile Phone Battery Level
    : Displays the current battery level of the mobile phone.

  6. Flash
    : Displays the flash status.

  7. Gimbal Mode
    : Displays the current gimbal mode: Follow, Tilt Locked, FPV, or SpinShot.

  8. Focus/Zoom Mode
    MF: Indicates the feature of the side wheel when using focus (MF) or zoom (ZM).

  9. Front/Rear camera Switch
    : Tap to switch between the front and rear cameras of your mobile phone. Selfie, Follow, and glamour effects are automatically enabled when switching to the front camera.
    Note: glamour effects are not supported when recording at 4K or 60fps.

  10. Shooting Modes
    Scroll to select the shooting mode.
    Hyperlapse: this enables you to shoot a Timelapse photo while moving the mobile phone. Tap the shutter button to begin.
    Timelapse: there are four types of timelapse (Fixed Angle, L to R, R to L, and Custom Motion). After selecting the timelapse, tap the settings at the top of the screen. For
    Fixed Angle, L to R, and R to L set the interval and duration, and start to shoot. For Custom Motion, select up to four positions and the gimbal will move to each position in the sequence.
    DynamicZoom: choose from Move Out and Move In mode. After selecting a mode, drag a box to select a subject, and tap the shutter button to start shooting. Slow Motion: tap to shoot video at 4x and 8x slow motion. Check the mobile phone compatibility list for more information.
    Video: tap to shoot a normal video.
    Photos: tap to take a single shot photo. Press and hold for burst shooting.
    Pano: tap to take a 3×3, 240°, or CloneMe panorama photo. The camera will take nine, seven, or three photos separately and generate a pano.
    Story: provides several templates for recording video.

  11. Shutter/Record Button
    : Tap to take a photo or to start or stop recording a video.

  12. Gesture Control Switch
    : Tap to access Gesture Control settings.

  13. Playback
    : Tap to preview photos and videos.

  14. Focus Distance
    : Click the side wheel to switch to focus mode and display the current focus distance.

  15. Zoom
    : Displays the current zoom ratio. Place two fingers on the screen and spread to zoom in, pinch to zoom out, or slide the bar to control zoom.

  16. Shooting Parameters
    : Displays the shutter speed, ISO, and EV values (Compatible with most mobile phones).

  17. Settings • • •
    : Camera Settings
    The settings vary depending on the shooting mode. Note that the flash, white balance, and grid settings are only available when using the rear camera. For iOS devices, Selfie Flip is available when using the front camera in photo and video mode. For Android devices, Selfie Flip is only available in photo mode.
    : Gimbal Settings
    Gimbal Mode: choose from Follow, Tilt Locked, FPV, and Spinshot. Follow Speed: provides Fast, Medium, and Slow follow speed. Gimbal Auto Calibration: reduces drift caused by nearby magnetic interference or human error. Before calibrating, place Osmo Mobile 6 on a flat surface using a tripod. Do not touch the gimbal during calibration. Horizontal
    Gimbal Adjustment: make sure the magnetic phone clamp is level before adjusting the gimbal.
    Dial Mode: assign focus, zoom, or disable features for the side wheel.
    Press Switch Button 3 Times: features can be set to take photos, record, or enter Quick Settings. Joystick Speed: tap to set the maximum speed when controlling the joystick. There are Fast, Medium, and Slow options.
    Joystick Control Direction: choose from Free and Horiz/Vert. Free enables the gimbal to be controlled in horizontal and vertical directions simultaneously. HorizNert enables the gimbal to be controlled in a horizontal or vertical direction. Invert Joystick: after enabling this feature, the gimbal movement direction is inverted. Select from Off, Horizontal, Vertical, and All. After enabling Horizontal, the pan-axis movement direction is inverted. After enabling Vertical, the tilt-axis movement direction is inverted.
    Invert Dial: after enabling this feature, the dial is inverted from the previous settings. Select from Disable, Focus Direction, Zoom Direction, and All options.
    Sound: the sound of the gimbal can be turned on/off.
    General Settings
    Includes information such as Device Management, Device Name, Version Information, and Device Serial Number.

  18. Shooting Parameters Settings Shooting Parameters can be set according to the shooting mode. Tap the icon to access settings.

  • Gesture Control and ActiveTrack 5.0 are not available in the following scenarios:
    a. Gimbal mode is set to FPV or SpinShot. b. The zoom ratio exceeds 3x.

  • Selfie and Follow are not available in the following scenarios:
    a. Gimbal mode is set to FPV or SpinShot.
    b. Gesture Control is enabled.
    c. The zoom ratio of the front camera exceeds 3x.

  • Shooting parameter settings vary depending on the model of the mobile phone. Refer to the Mobile Phone Compatibility List (www.dji.com/osmo-mobile-6) for more information.

Firmware Update

Use DJI Mimo to update the Osmo Mobile 6 firmware. It takes approximately three minutes to complete an update.
How to Update
Before starting an update, make sure that the battery level indicator shows green or yellow. Connect Osmo Mobile 6 to your mobile device and launch DJI Mimo. You will be prompted if a new firmware update is available. To start updating, connect the mobile device to the internet and follow the on-screen instructions. Do not exit DJI Mimo while updating the firmware. Pay attention to on-screen prompts. The system status indicator will blink green and red alternatively and become solid green once the firmware update has been completed successfully. If an update is unsuccessful, restart DJI Mimo, reconnect the Bluetooth, and retry.
Storage
Osmo Mobile 6 is designed to be folded for easier storage and transportation. Make sure to fully retract the built-in extension rod and fold the Osmo Mobile 6 after powering off. Rotate the pan and tilt the axis as shown and fold the gimbal. The mark on the axis arm should slot into the hole on the handle. Rotate the pan axis as shown to lock in place.

dji OSMO Mobile 6 Gimbal - 19

Specifications

Genera

 Gimbal Dimensions| Unfolded: 276×111.5×99 mm (LxWxH) Folded: 189×84.5×44 mm (LXWXH)
Weight| Gimbal: Approx. 309 g
Magnetic Phone Clamp: Approx. 31 g
Max Length of Built-in Extension Rod|  215 mm
Compatible Phone Weight| 170-290 g
Compatible Phone Thickness| 6.9-10 mm
Compatible Phone Width|  67-84 mm
Battery
Type| Li-Po 2S
Chemical System| LiCoO2
Capacity| 1000 mAh
Energy| 7.74 Wh
Voltage| 6-8.8 V
Charging Temperature| 5° to 40° C (41° to 104° F)
Operating Temperature| 0° to 40° C (32° to 104° F)
Operating Time| Approx. 6 hours and 24 minutes (measured under ideal conditions with the gimbal fully balanced)
Charging Time| Approx. 1 hour 24 minutes (measured with a 10W USB-C charger)
Gimbal Charging Port| USB-C
Power Output Port| N/A
Bottom Port|  1/4″-20 Screw Hole
  Gimbal
Power Consumption| 1.1 W (Approximate, measured under ideal conditions)
Controllable Range| Pan: -95° to 95°
Roll: -100° to 175°
Tilt: -25° to 40°
Mechanical Range| Pan: -161.64° to 173.79°
Roll: -12030° to 211.97°
Tilt: -101.64° to 78.55°
Max Control Speed| 120°/s
Wireless Mode
Model| Bluetooth 5.1
Other
App| DJI Mimo
Grip Tripod
Dimension| Length: 138 mm
Diameter: 32 mm
Weight| Approx. 72 g

WE ARE HERE FOR YOU https://www.dji.com/support https://www.dji.com/osmo-mobile-6/downloads
If you have any questions about this document, please contact DJI by sending a message to
DocSupport@dji.com.
Copyright © 2022 DJI All Rights Reserved.

Documents / Resources

| dji OSMO Mobile 6 Gimbal [pdf] User Manual
OSMO Mobile 6 Gimbal, OSMO Mobile 6, Gimbal, Smart Gimbal
---|---
| dji OSMO Mobile 6 Gimbal [pdf] User Guide
OSMO Mobile 6 Gimbal, OSMO Mobile 6, Gimbal, Smart Gimbal
| dji Osmo Mobile 6 Gimbal [pdf] User Guide
Osmo Mobile 6 Gimbal, Osmo Mobile 6, Gimbal

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals