Televes 434202 EasyF 4W Splitter Instructions
- June 13, 2024
- Televes
Table of Contents
Televes 434202 EasyF 4W Splitter
Product Information
-
The EasyF 4W Splitter is a 4-way splitter designed for SMATV signals. It operates in the frequency range of 5 to 2400 MHz with a 9 dB/7.5 dB signal loss. The splitter features a compact design and efficient electrical behavior. It is suitable for indoor installation and can also be used outdoors with a case (ref. 4177).
-
The product has a logical reference of 434202, a logical reference of EFV4GB, and an EAN13 code of 8424450143575. It is made of Zamak, a material known for its high shielding properties. The automated manufacturing process using new-generation micro-components ensures outstanding reliability.
-
The EasyF connection system is a key highlight of this product.
It offers easy installation and savings on mounting. The absence of F connectors allows for a reduced chassis size and secure connection of two cables with a single screw. -
The device has a net weight and gross weight of 288.30 g, with dimensions of 104.00 mm (width), 88.00 mm (height), and 84.00 mm (depth). The main product weight is 188.00 g.
Product Usage Instructions
- Unscrew the device’s cover to access the connection.
- Insert the previously stripped coaxial cables into the device.
- Close the cover and screw it to ensure a secure connection.
- Note: The DC pass can only go from the outputs to the input. Exceeding the indicated value can cause irreversible errors.
- For more information about the EasyF system’s reliability and benefits, please visit https://www.televes.com.
- 4-way Splitter and EasyF connection system for SMATV signals, with a compact design and an effcient electrical behaviour.
- Conceived for indoor installation, it can also be used outdoors with a case (ref. 4177).
| Ref. | 434202 |
|---|---|
| Logical ref. | EFV4GB |
| EAN13 | 8424450143575 |
| Other features | |
| --- | --- |
| Complement | Splitter + Case |
| Packing | |
| Blister | 1 pcs. |
| Box | 8 pcs. |
- Pallet 32 pcs.
- weight
Highlights
- EasyF connection system: easy to install, savings on mounting
- Made of Zamak, high shielding
- Outstanding reliability: automated manufacturing using new generation micro-components
Main features
- Improves through losses
- Outstanding electrical behaviour: impulsive noise reduction Grounding screw provided
- DC pass from the outputs to the input
Discover
- EasyF connection system: simplicity and savings
- EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability.
- Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
- Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes diffcult when there is little room
- Connection reliability: the clamp holding the cables prevents the coaxial cable to come off.
- Cost savings: no additional connectors are required (neither F nor IEC)
- Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier.
- Very easy three-step mounting : only screwing and unscrewing the covers is required to connect both cables:
- Unscrew the device’s cover to access the connection
- Insert the previously stripped coaxial cables
- Close the cover and screw to ensure connection
Learn more about EasyF system reliability
- With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
- Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed
- Failure rate reduction: usually produced as a result of cold soldering joints
- Electromagnetic behaviour optimization: for high frequencies
- Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
Application example
Exceeding the indicated value can cause irreversible errors.
Note: The DC pass can only go from the outputs to the
input.
Technical specifications
Ref. 434202
Documents / Resources
|
Televes 434202 EasyF 4W
Splitter
[pdf] Instructions
434202 EasyF 4W Splitter, 434202, EasyF 4W Splitter, 4W Splitter, Splitter
---|---