TQ-Group 350857.0100 Vacuum Package Instructions

June 13, 2024
TQ-Group

Product information VAKUUM PACKAGE
InstructionsTQ Group 350857.0100 Vacuum Package VAKUUM PACKAGE

Compilation of components to generate vacuum.
Material number: 350857.0100
Follow these instructions for correct and safe operation.

Scope of delivery

2x plug-in connection
1x Basic ejector
1x Plastic tubing
10x Push-in Y-connector
10x Push-in L-fitting
10x Push-in L-fitting

Symbols

| General warning sign
---|---
| General mandatory action sign
| Refer to instruction manual / booklet
•| Lists
1.| Numbering (The consecutive numbering defines the sequence of the instructions given.)
| Reference

Intended use

The VAKUUM PACKAGE is an addition to the TQ_Robot_Control_Cabinet and Pneumatik-Package. It is only used in conjunction with the TQ_Robot_Control_Cabinet, Pneumatik-Package and the Franka Production 3 robot.
NOTE
The product is used as part of a higher-level overall system.
Project planning, assembly, pneumatic connection, and commissioning exclusively by authorized specialist personnel with the following knowledge:

  • Knowledge of the applicable regulations on occupational safety and accident prevention
    All applications deviating from the intended use are regarded as improper use.
    These include, for example:

  • Do not use outdoors

  • Use outside the permissible technical operating limits

  • Do not use in potentially-explosive environments

  • Do not ignore safety instructions

  • Operation after unauthorised conversions or modifications

  • Do not operate a faulty machine

Safety Instructions

NOTE
Prior to handling the vacuum device (assembly, use, control) , you must have read and understood the content of this Product information.

  • Comply with instructions and notes

NOTE
Assembly, pneumatic connection and commissioning only by authorized specialist personnel who have special knowledge of how to use the product.

Components

TQ Group 350857.0100 Vacuum Package - Components

Pos. No.| Component| Manufacturer Artikel-No.| TQ-Systems Artikel-No.
---|---|---|---
1| plug-in connection| Festo GmbH & Co. KG QS-6-4 153037| 330423.01
2| basic ejector| J. Schmalz GmbH SBP 07 S01 SDA 10.02.01.00564| 330429.01
3| plastic hose| Festo GmbH & Co. KG PUN-4X0,75BL 159662| 330428.01
4| Y connector| Festo GmbH & Co. KG QSY-4 153148| 331296.01

Assembly

NOTE
Device damage due to incorrect installation/attachment and unsuitable environmental conditions.
Prerequisites:

  • During the electrical installation, observe all valid national and regional regulations as well as the regulations of the responsible energy supply company.
  • Observe the operating instructions for TQ Roboter Switch Cabinet.
  • Observe manufacturer documentation Festo GmbH & Co. KG.
  • Observe manufacturer documentation J. Schmalz GmbH.
  • The Franka Production 3 (Franka Emika GmbH) and the TQ robot control cabinet must not be live during assembly.

NOTE
Do not use any sharp or pointed objects to open the packaging.

  1. Remove packaging

  2. Check that the delivery is complete and undamaged, otherwise contact the manufacturer.
    Impressum
    NOTE
    Observe the tightening torques of Festo GmbH & Co. KG and J. Schmalz GmbH.
    CAUTION
    When working on live components, there is a risk of death from electric current.
    • Work on electrical or electronic components may only be carried out by electrotechnical specialists and in accordance with the currently valid electrotechnical guidelines.

  3. Assembly and connection of the components according to the scheme.TQ Group 350857.0100 Vacuum Package - Components 1

Control and Maintenance

NOTE
In case of damage or wear, the entire product must be replaced.
The following checks are required to ensure trouble-free and permanent function:

  • Clean only with a dry, lint-free cloth
  • Secure fastening of all components
  • Retighten all connections after 100 hours of operation with the specified tightening torque.
  • damage
  • Loose line connections or plug connections

Disposal

Dispose of the disassembled components, packaging, operating materials, etc. in accordance with the applicable provisions and, to the extent possible, recycle them.

  • Dispose of cardboard packaging material as waste paper in the local waste disposal system.

  • Dispose of plastic films and packaging in accordance with the national laws and regulations.
    **** Electronic components and e-scrap are considered hazardous waste.
    Do not dispose electrical and electronic components of the vacuum device in household waste. Dispose of these components separately according to legal requirements.
    Hazardous waste must be exclusively disposed of through licensed waste disposal companies.

  • Collect all materials used for the vacuum device operation as per the manufacturer’s product information and separate, dispose of, or recycle accordingly.
    Dispose of all waste properly and in accordance with the
    – Emissions Control Act,
    – Waste Disposal Act,
    – and the Water Resources Act.
    Supplementary, higher-level, company-internal, or regional provisions may apply.

Warranty

If the above Conditions for the intended use are not met or if the safety instructions are not followed or if any maintenance work is not carried out as required, this leads to an exclusion of liability and the loss of the warranty.

Technical data

Parameter Value
Material PA6 GF30, aluminium, brass, POM, NBR, PE
Safety class IP65
Diameter nozzles 0,7 mm
Pumping speed 15 Nl/min
Vacuum max. 850 %
Air consumption 25 NL/min
Operating pressure 3 bar … 6 bar
Operating medium Compressed air, unlubricated or lubricated according to ISO

85731:2001,
class 71-4-42
Environmental
temperature| +0 °C – +50 °C
Air humidity| 20 to 85% rel.
Dimensions| 45 x 28 x 10 mm
Weight| approx. 400 g

Installed Components (OEM)

OEM supplier documentation

Component Manufacturer Art. No.
Basic ejector J. Schmalz GmbH SBP 07 S01 SDA 10.02.01.00564

Copyright note (according to DIN ISO 16016:2007-12):
The dissemination and reproduction of this document as well as the exploitation and communication of its content is not permitted, unless explicitly authorised.
Infringements shall result in an obligation to provide compensation for damages. All rights are reserved in the event of a patent being granted or a utility model or design being registered.

Imprint:
TQ-Systems GmbH | TQ-Robotics
Gut Delling
Mühlstraße 2
82229 Seefeld
Germany
P. +49 (0) 8153 9308-0
F. +49 (0) 8153 4223
www.tq-group.com
E-Mail: info@tq-group.com
District court Munich, HRB 105018
© V 1.0 | 05/2023 | ENG
Document: PI_350857.0100
V 1.0 | 05/2023
Copyright © TQ-Systems GmbH

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals