SWIT R230S 48V 750W Light Stand Power Adaptor User Manual
- June 13, 2024
- SWIT
Table of Contents
SWIT R230S 48V 750W Light Stand Power Adaptor User Manual
Thank you for choosing SWIT products,Please read the instructions before using and keep it for future reference.
Warning
- Do not allow the adapter to come into contact with rain.
- Keep the electrodes clean and do not allow a short circuit between them
- Make sure that the power of the equipment using the electricity meets the battery specifications.
- Please mount the adapter reliably on a stand to prevent serious damage due to drops.
Characteristics
- Compatible with SWIT high voltage and dual voltage batteries, with the maximum output of 48V/750W when using SWIT HB-C420S..
- One SPEAKON interface, supports 22~33.6V battery direct out power.
- Dual LEDs for individual channel status indication.
- Compatible with tripods with diameters from 25mm to 45mm.
- Small size and innovative fanless cooling design for quieter and more convenient use.
- Symmetrical design for a more stable centre of gravity
Description of appearance
| Model | TD-R230S |
|---|---|
| Output interface | 3-core XLR |
| Input voltagerange | Starting voltage:25.6-35V |
Undervoltage value:23V
Output power| | 17.4A
750W, 48V 15.6A| 750W, 22-33.6V
Operatingtemperature| -20-40°C
Net weight| Around 1.3kg
SIZE| 146123110 mm
- Locking device
- LED indicator
- V-mount plate
- Mounting brackets
- 48V 3-core XLR
- Adapter switches
- SPEAKON
Note:
- It is recommended to use the same type of battery with the same power level;
- 48V/750W output with SWIT HB-C420S only
- With other batteries mounted, the maximum output power is the maximum output power of the adapter or the sum of the outputs of the two batteries (Take smaller value).
- The 3-core XLR output can only be turned on when the battery is mounted at a voltage in the range of 25.6~35V; the 3-core XLR output is turned off when the battery is discharged at a voltage below 23V.
Instructions
- When the adapter switch is switched off, the LED indicator goes out and there is no output from the discharge port.
- LED indicator:
Indicator status
Green| The battery is reliably mounted and thecurrent channel is normal.
Slow flashingred light| The battery is about to run out of power,
pleasereplace the battery as soon as possible.
Red| The battery is depleted.
Red lightflashing| In case of shorttemperatureconditions, pcables, wait
fortemperaturerestored.| circuit, over current, overprotection and other
abnormalease unplug all the batteries andthe adapter to drop to roomor re-plug
the batteries can be
Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: [email protected]
