Televes 543702 EasyF 4W Splitter Instruction Manual
- June 13, 2024
- Televes
Table of Contents
543702 EasyF 4W Splitter
**Instruction Manual
**
543702 EasyF 4W Splitter
EasyF 4W Splitter 5…2400 MHz 9 dB/7.5 dB
4-way Splitter and EasyF connection system for SMATV signals, with a compact
design and an ecient electrical behaviour.
Conceived for indoor installation, it can also be used outdoors with a case
(ref. 4177).
Other features
| Complement | Splitter |
|---|
Packing
| Box | 10 pcs. |
|---|---|
| Bucket | 300 pcs. |
| Ref. | 543702 |
| Logical ref. | EFV4 |
| EAN13 | 8.42445E+12 |
Physical data
| Net weight | 112.00 g |
|---|---|
| Gross weight | 112.00 g |
| Width | 80.00 mm |
| Height | 55.00 mm |
| Depth | 14.00 mm |
| Main product weight | 112.00 g |
Highlights
- EasyF connection system: easy to install, savings on mounting
- Made of Zamak, high shielding
- Outstanding reliability: automated manufacturing using new generation micro-components
Main features
- Improves through losses
- Outstanding electrical behaviour: impulsive noise reduction
- Grounding screw provided
- DC pass from the outputs to the input
Discover
EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the
coaxial cable is directly inserted in the device, thus improving connection
reliability. Thanks to the absence of F connectors, the chassis can be reduced
and the connection of two cables secured with a a single screw.
- Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes dicult when there is little room
- Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
- Cost savings: no additional connectors are required (neither F nor IEC)
- Space optimization: inputs and outputs are always on the same side of the device to prevent
- coaxial cables from bending, and to make working inside cabinets and register boxes easier
- Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
- Unscrew the device’s cover to access the connection
- Insert the previously stripped coaxial cables
- Close the cover and screw to ensure connection
Learn more about EasyF system reliability
With EasyF, the connection between the coaxial cable and the device is carried
out using an automated system for contact insertion of the inner conductor,
without any soldering.
- Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed
- Failure rate reduction: usually produced as a result of cold soldering joints
- Electromagnetic behaviour optimization: for high frequencies
- Our commitment with environment is reinforced: pollution caused by the welding process is
- eliminated and production power consumption is reduced
Application example
Exceeding the indicated value can cause irreversible errors.
Note : The DC pass can only go from the outputs to the input.
technical specifications : Ref. 543702
| Number of outputs | 4 | |
|---|---|---|
| Inputs/Bands | TERR | |
| ｔhrough losses | dB | 9 |
| Rejection between outputs | dB | > 17 |
| Connectors | “EasyF” type | |
| Max. current | mA | 300 |
| DC pass | Out□ln |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>