Televes 5469 EFV6 EasyF 6W Splitter Instructions
- June 13, 2024
- Televes
Table of Contents
5469 EFV6 EasyF 6W Splitter
Instructions
5469 EFV6 EasyF 6W Splitter
EasyF 6W Splitter 5…2400 MHz 11 dB/14 dB
6-way Splitter for SMATV signals, with a compact design and an ecient
electrical behaviour.
concieved for indoor installation, it can also be used outdoors with a case
(ref. 4163).
Supplied in 10-unit boxes.
Packing
| Box | 6 pcs. |
|---|---|
| Bucket | 120 pcs. |
| Ref. | 5469 |
| Logical ref. | EFV6 |
| EAN13 | 8.42E+12 |
Physical data
| Net weight | 240.00 g |
|---|---|
| Gross weight | 240.00 g |
| Width | 121.00 mm |
| Height | 59.00 mm |
| Depth | 14.00 mm |
| Main product weight | 240.00 g |
Highlights
- EasyF connection system: easy to install, savings on mounting
- Made of Zamak, high shielding
- Outstanding reliability: automated manufacturing using new generation micro-components
Main features
- Improves through losses
- Outstanding electrical behaviour: impulsive noise reduction
- Grounding screw provided
- DC pass from the outputs to the input
Discover
EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the
coaxial cable is directly inserted in the device, thus improving connection
reliability. Thanks to the absence of F connectors, the chassis can be reduced
and the connection of two cables secured with a a single screw.
Real time savings: speeding the installation is possible without the need for
coaxial cable termination. Furthermore, there is no need for screwing the
connectors on the device, which is sometimes dicult when there is little room
Connection reliability: the clamp holding the cables prevents the coaxial
cable to come off
Cost savings: no additional connectors are required (neither F nor IEC)
Space optimization: inputs and outputs are always on the same side of the
device to prevent
coaxial cables from bending, and to make working inside cabinets and register
boxes easier
Very easy three-step mounting: only screwing and unscrewing the covers is
required to connect both cables:
- Unscrew the device’s cover to access the connection
- Insert the previously stripped coaxial cables
- Close the cover and screw to ensure connection
Learn more about EasyF system reliability
With EasyF, the connection between the coaxial cable and the device is carried
out using an automated system for contact insertion of the inner conductor,
without any soldering.
- Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed
- Failure rate reduction: usually produced as a result of cold soldering joints
- Electromagnetic behaviour optimization: for high frequencies
- Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
Technical specifications : Ref. 5469
| Number of outputs | 6 | |
|---|---|---|
| Inputs/Bands | RET | |
| ## | dB | < 12 |
| ｔhrough losses W2 | dB | < 12 |
| ｔhrough losses WＳ | dB | < 12 |
| ｔhrough losses W4 | dB | < 12 |
| ｔhrough losses W5 | dB | < 17 |
| ｔhrough losses W6 | dB | < 17 |
| Rejection between outputs | dB | > 30 |
| Connectors | “EasyF” type | |
| Max. current | mA | 300 |
| DC pass | Out□ln |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>