DIGITUS DN-93634 CAT6A Shielded Toolless Plug Instruction Manual
- June 13, 2024
- DIGITUS
Table of Contents
DIGITUS DN-93634 CAT6A Shielded Toolless Plug
Product Information
The product is a cable connector designed for use with a PCB (Printed Circuit Board). It is manufactured by Assmann Electronic GmbH and its model number is DN-93634.
Product Usage Instructions
- Take off the cable jacket about 2 cm.
- Put the cable into the IDC (Insulation Displacement Connector) according to the terminal T568.
- Cut away any extra wires.
- To insert the IDC into the PCB, connect the wired IDC manager to the PCB.
- Press down both sides of the metal housing until the wire is securely inserted into the IDC pin case.
- The finished product is now ready for use.
For more information, you can refer to the manual-hub.com website.
Note : The Declaration of Conformity, which is part of the shipping content, can be requested by post from the manufacturer’s address mentioned on the website.
DIGITUS® CAT6A shielded toolless plug
Instructions
- Take off the cable jacket about 2 cm
- Put cable into IDC according terminal T568
- Cut away the extra wires
- To insert IDC into PCB
- Press down both side metal housing until the wire into the IDC pin case.
- The finished product.
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.com
Assmann Electronic GmbH3 58513 Germany
References
- ASSMANN Electronic GmbH | Germany
- ASSMANN Electronic GmbH | Germany
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>