LASER HPS-FDAN Bluetooth Headphones With Active Noise Cancelling User Manual
- June 13, 2024
- Laser
Table of Contents
User Manual
Bluetooth Headphones
with
Active Noise Cancelling
HPS-FDAN
WHAT’S IN THE BOX
- ANC Headphones
- USB-A to USB-C charging cable
- User Manual
CONTROLS AND PORTS
| 1 | Multi-Function button | 4 | USB-C Charging Port | 7 | Microphone |
|---|---|---|---|---|---|
| 2 | Volume Up Previous Track | 5 | AUX IN | 8 | ANC Indicator |
| 3 | Volume Down/Next Track | 6 | ANC Switch | 9 | Power Indicator |
CHARGING
- Fully charge the headphones before first use.
- Switch off headphones before recharging.
- Disconnect the cable when fully charged.
Use the supplied cable. Connect the USB-C jack to the headphones.
Connect the other end to a USB power source.
The indicator light will turn red when charging; it will turn off when
charging is done.
A USB power adaptor (5V 1A, not included) is recommended for charging, or a
PC/laptop USB port can be used.
BLUETOOTH
PAIRING
-
Turn on the headphones by pressing and holding the Multi-function button until the indicator light flashes red/blue.
-
Enable Bluetooth on your connecting device. It will search for nearby Bluetooth devices.
-
Select “HPS-FDAN” fo pair and connect.
The indicator light will turn solid blue.
Note: If “HPS-FDAN” does not appear on your connecting device’s screen, try again from the beginning of step 1. -
Audio played on your connected device can now be heard through the headphones.
DISCONNECTING/UNPAIRING
- To disconnect, turn off your connected device’s Bluetooth or the headphones.
- To unpair (remove the connection entirely), go to your connected device’s Bluetooth settings, find the headphones on the list of paired devices, and select “Forget” or “Unpair’.
Note: The headphones only connects to one device at a time.
BASIC OPERATIONS
POWER ON/OFF
Press and hold the Multi-function button (about 5 seconds) until the
indicator light turns blue.
Press and hold the Multi-function button (about 5 seconds) until the indicator
light Starts flashing and turns off.
ANC (ACTIVE NOISE CANCELLING) ON/OFF
When the headphones is turned on, slide the ANC switch; the indicator light
will turn green.
Slide the ANC switch again to turn off; the indicator light will turn off.
PLAY/PAUSE MUSIC
Press the Multi-function button to play or OMause the music.
VOLUME UP/DOWN
Press the + or – button to increase or decrease the volume.
You can control the volume using your connected device as well.
SELECT THE NEXT/PREVIOUS SONG
When listening to music, press and hold the + or – button to skip to the
previous or next Song.
ANSWER/HANG UP
When there is an incoming call, press the Multi-function button to answer the
call.
Press again to end the call.
REJECT
When there is an incoming call, press and hold the Multi-function button to
reject the call.
ACTIVATE THE VOICE ASSISTANT
Double press the Multi-function button to activate voice assistant.
Double press the Multi-function button again to quilt.
AUX MODE
-
Plug one end of a 3.5mm audio cable (not supplied) into the headphone jack of the external device.
-
Plug the other end to the AUX port of the headphones.
Note: Bluetooth and ANC functions will turn off in AUX mode. -
Start playing music from the external device.
TROUBLESHOOTING
HEADPHONES DO NOT TURN ON
- The battery is completely discharged.
Recharge the battery.
NO SOUND FROM THE HEADPHONES
- The volume level is low or muted. Unmute or increase the volume.
- There is no connected Bluetooth device. Pair and connect a Bluetooth device and try again.
CANNOT PAIR A BLUETOOTH DEVICE WITH THE HEADPHONES
-
The Bluetooth device is out of range.
Bring the Bluetooth device closer to the headphones. -
Make sure the headphones are in Bluetooth mode. Turn off the headphones and turn on again to switch to Bluetooth mode.
-
If the device’s Bluetooth name is not found on the Bluetooth list, refresh the list, or search again and wait up to 1 minute for the device to appear.
-
If the headphones are already paired with another device, disconnect or unpair before connecting to the second device.
SPECIFICATIONS
| Bluetooth version | v5.3 |
|---|---|
| Effective distance | 10m |
| Battery capacity | 300mAh |
| Charging voltage and current | 5V, 1A |
| Play time | Up to 20 hours at 80% volume with ANC off |
| Charging time | Approx. 2.5 hours |
Thank you for your purcharce!
Laser Corporation is 100% Australian owned & operated. To get the most out of
your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs,
Warranty claims, and more, please scan the following QR code:
https://www.laserco.com.au/support
Visit our website
www.laserco.com.au Check us out at
www.youtube.com/lasercoau
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>