Yaber K2s Projector 4K with Android TV User Manual
- June 13, 2024
- YABER
Table of Contents
Where to Get More Help
support@yabertech.com
www.yaber.com
@Veber Entertainment Projector
@Yaber Entertainment Projector
K2s Projector 4K with Android TV
Dear Customers,
There are some FAQs as follows. I hope they help you
Alexa commands supported by YABER K2s
- Alexa, Turn off the projector
- Alexa, Switch to hdmi on projector
- Alexa, Open Netfix/youtube on projector
- Alexa, Go settings on projector
- Alexa, Go home on projector
- Alexa, Mute/unmute/volume up/volume down on projector
- Alexa, Pause/resume on projector
- Alexa, Open bluetooth settings on projector
- Alexa,Open network settings on projector
- Alexa, Turn on/off screen saver on projector
- Alexa, Turn on/off auto focus on projector
- Alexa, Turn on/off silent mode on projector
- Alexa, Turn on/off screencast on projector
- Alexa, Turn on/off document mode on projector
- Alexa, Next /previous/start over on projector
More Alexa commands will be added continuously by the yaber team
There are two remote controls, which one should l use?
Both remote controls can be used. Normally, only the projector remote control
is needed to control all the operations of the K2s, including those in Android
TV.
The first time you use Android TV, you need to use Android remote control to
match.
If you want to experience the built-in voice function in Android TV, you can
use the Android remote control after connecting it via Bluetooth (this remote
control can only be used in Android TV)
Why does a pop-up window of yaber.com appear after NFC recognition?
If NFC configuration has not been completed, scanning the NFC tag will trigger
the default pop-up window. Please follow the instructions in the manual to
complete the NFC configuration first.
It’s still blurry after auto-focusing?
a. If the angle exceeds 20 degrees, the edge/part of screen will show in
blurry, please re-adjust the distance or angle.
b. Use the remote control for manual focus, go to Setting–>Manual Focus, and
click the ‘F+/F-‘ button on the remote control to continuously adjust until it
is clear.
Why can’t connect to bluetooth?
a. Bluetooth can only transmit audio signals, not video/picture signals. So
all bluetooth projectors can only connect to bluetooth
speakers/headphones/sound bars,but not to mobile phones/computers to project
video.
b. Please check if your device is connected to other Bluetooth accessories.
c. If still cannot connect to speaker, it may be a compatibility issue. Please
send us model No. of the bluetooth speaker for more help.
Why does the picture suddenly appear darker?
If there is a”Moon icon similar to the one on the right” displayed in the
upper right corner of the main page, it means that Quiet Mode is turned on,
and the brightness will be reduced in this mode.
You can turn it off by pressing the corresponding button on the K2s or
clicking ‘Quiet Mode” on the main page
Go to Setting->Projection -> Brightness Setting to check if the brightness is
set too low.
Why is the automatic correction invalid after moving the projector, or the
correction degree is very small?
Over 20 degrees, automatic correction cannot be performed, you can use the
remote control to perform manual correction, Open Setting–>-4-Points Keystone
to adjust suiteable screen.
Why does a pop-up window appear every time after performing automatic keystone
correction?
In order to achieve the perfect picture effect, you can use the left and right
directional keys to make fine adjustments to the keystone correction after
each automatic correction. If you do not need to make further adjustments,
simply press the back button to quickly close this pop-up window.
If it still cannot solve your problem, we’re always online for your 100%
satisfaction!
Please fee l free to let us know and solve your problem.
Best Regards,
support@yabertech.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>