BORMANN BWR5025 Jack Stands Instruction Manual

: June 4, 2024
: BORMANN

Table of Contents

Important Safety Information
Operation
Maintenance & Inspection
Technical Data
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

BORMANN BWR5025 Jack Stands

BWRS5SO0e25 —- BWR5026

Warning!

Important Safety Information

Failure to read these warnings may result in personal injury or vehicle damage. Do not overload jack stands beyond their rated capacity! Overloading can cause damage to or failure of the jack stands. Position load on center of saddle always using stands in pairs, on hard, level surface capable of sustaining the load. Using stands on other than hard, level surfaces can result in instability and possible loss of load.

Operation

Refer to your vehicle owner’s manual for proper jacking lift points. This area of the vehicle is specified by the vehicle manufacturer.
Position stands under the vehicle at points specified by the vehicle manufacturer as proper load support points.
To adjust stands hold the control lever up while lifting the saddle shaft to the desired height. Push control lever down to lock pawl into teeth located in centre column. Make sure pawl is fully engaged into the teeth.
Carefully lower load onto stands. Warning! Set both jack stands to the same height.

Maintenance & Inspection

Visual inspection shall be made before using the stands. Check for cracked welds and missing and/or damaged parts. A stand that appears to be damaged must be removed from service immediately.
Do not use Jack stands as a long-term stand for the vehicle. Use them only while making repairs, then immediately lower the vehicle to the ground.

Technical Data

BWR5025
Max Lifting Capacity: 2Ton
Working distance: 95-365mm
Weight: 3Kg
Technical Data BWR5026 Max
Lifting Capacity: 3Ton
Working distance: 95-365mm
Weight: 3.2Kg

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

** DISPOSE OF
PACKAGING
RESPONSIBLY
DO NOT DISPOSE
OF OF ELECTRICAL GOODS
IN HOUSEHOLD WASTE Art Nr: 011231 – 011248
[ WWW.BORMANNTOOLS.COM**](http://WWW.BORMANNTOOLS.COM)