ENFORCER SM-205Q Miniature Surface-Mount Contacts Instruction Manual
- June 6, 2024
- ENFORCER
Table of Contents
Miniature Surface-MounContacts
SM-205Q/W / SM-205Q/BR
Manual
SM-205Q/BR shown
- Miniature “flange-type” surface-mount magnetic contacts perfect for sliding doors and windows where space is limited
- Screw or adhesive mount
- Mounting flange breaks off for extra miniature size
- High-impact weatherproof ABS plastic case
- The contact reed switch is SPST, deactivated rhodium on gold
- underplating for a longer expected life
- For closed-loop circuits
- 3 /4″ (19mm) Gap
- 15″ (38cm) Wire leads extend from the side of the switch
- Double-sided tape included
- Lifetime limited warranty
Parts List
’10x Contact switches
10x Magnets
2x Mounting tape
1x Manual
Specifications
| Model | SM-205Q/W | SM-205Q/BR |
|---|---|---|
| Loop type | Closed-loop | |
| Electrical connection | N.O. (SPST) | |
| Operation gap | 3/4″ (19mm) | |
| Connectors | 15″ (38cm) Leads from side | |
| Housing color | White | Brown |
Switch
Material| High-impact ABS plastic
Contacts| Deactivated rhodium on gold underplating
Contact rating| 1.0A@10VDC (max.)
10W (max.)
Operating temperature| -150-160° F (-25°-70° C)
Switch cycles| 50 Million (0.1mA@5VDC)
Switch
Dimensions| 11/4″x5/16″x1/4″ (32x8x6 mm)
Magnet| 11/4″x5/16″x1/4″ (32x8x6 mm)
Magnet type| Alnico 5
Overview
Protected side of the door/window.
Installation
Please read the manual carefully before you begin the installation.
- Mount the contact above the door or window on the frame. For doors, ensure that the mounting is farthest from the hinged side of the door.
- Connect the two wires to the alarm control panel.
- Mount the magnet on the door/window so that it will face the contact. Be sure that the gap between the contact and magnet does not exceed 3 /4″ (19mm)
California Proposition 65 Warning:
These products may contain chemicals that are known to the State of California
to cause cancer birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
LIMITED LIFETIME WARRANTY:
This SECO-LARM product is warranted against defects in material and
workmanship while used in normal service for the lifetime of the product.
SECO-LARM’s
the obligation is limited to the repair or replacement of any defective part
if the unit is returned, transportation prepaid, to SECO-LARM. Under no
circumstances will SECO-LARM be responsible for any costs or charges for
removal, installation, or reinstallation. This Warranty is void if the damage
is caused by or attributed to acts of God, physical or electrical misuse or
abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty
installation, or if for any other reason SECO-LARM determines that such
equipment is not operating properly as a result of causes other than defects
in material and workmanship. The sole obligation of SECO-LARM, and the
purchaser’s exclusive remedy, shall be limited to repair or replacement only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special,
collateral, incidental, or consequential personal or property damages of any
kind to the purchaser or anyone else. This lifetime limited warranty is for
products sold and installed in the United States and Canada. For all other
countries, the warranty is 1 (one) year.
NOTICE: The SECO-LARM policy is one of continual development and
improvement. For that reason, SECO-LARM reserves the right to change
specifications without notice. SECO-LARM is also not responsible for
misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their
respective owners. Copyright © 2021 SECO-LARM U.S.A., Inc. All rights
reserved.
SECO-LARM U.S.A., Inc
16842 Millikan Avenue,
Irvine, CA 92606
Phone: 949-261-2999
800-662-0800
Website: www.seco-larm.com
Email: sales@seco-larm.com
PITSW1
Order Part# 763-205-2%
MI_SM-205Qxx_211102_ML.docx
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>