SpaDepot AC1067 Cover Mate II Slide Under Lifter For Hot Tubs User Guide
- June 13, 2024
- spaDepot
Table of Contents
SpaDepot AC1067 Cover Mate II Slide Under Lifter For Hot Tubs
Product Information
The COVERMATE II is a spa cover lifter designed to make it easier to remove and replace the cover of your hot tub. It is manufactured by SpaDepot.com.
Product Features
- Easy to use and operate
- Durable construction for long-lasting performance
- Designed to fit most standard hot tubs
- Allows for easy removal and storage of the spa cover
- Helps to reduce strain on the user’s back and arms
Product Usage Instructions
- To begin using the COVERMATE II, open the cover of your hot tub and fold it in half.
- The best way to lift the cover completely off the spa is to enter the hot tub. Carefully step into the hot tub and push the cover up from the center.
- If you prefer not to enter the hot tub, you can still lift the cover from outside. Stand beside the hot tub and firmly grab onto the
USING INSTRUCTION
- Open cover and fold in half.
- The best way to lift the cover completely off the spa is to enter the hot tub and push the cover up from the center.
- You can also lift the cover by standing outside the hot tub. Grab on to the bar with the foam grip and pull upward and back. Do not step on the bar that rests on the ground to open or close your cover. This is not a foot assist lift.
- To close the cover from inside the spa, pull the cover back towards you until it is resting on the sides of the spa. Get out of the tub and fold the top half of the cover. Position the spa cover on the spa, making sure that all four corners are properly positioned and square on the spa.
- Do not use the CoverMate in high wind conditions (greater than 10 mph). Injury from the spa cover being blown over and impacting the spa user can occur.
References
- SpaDepot.com | America's Favorite Hot Tub Supply Store
- SpaDepot.com | America's Favorite Hot Tub Supply Store
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>