Shenzhen Dinghe Communication BH450 802.11ac Dual Band Wi-Fi Router Instructions

 Shenzhen Dinghe Communication BH450 802.11ac Dual Band Wi-Fi Router

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Initial setting

2 Wi-Fi signals:
GL-SF1200-xxx
GL-SF1200-xxx-5G

Connect to Wi-Fi

Default password: goodlife (Shown on the bottom label)

Set up the router

In web browser, input http://192.168.8.1
to access router user interface(UI), select language to set up the router

Product

Reset button
Restore settings to restore all settings to default
You can follow the instructions below if you couldn’t access UI nor connect to router: Push the “Reset” button for 3 seconds then release, to restore the network
Push the “Reset” button for 10 seconds then release to restore all setting to factory default
Technical support
For more help:
Send email to support@szdhcomm.com
Ask question on OpenWRT, LEDE or other professional forums

Warranty statement

• The factory provides limited warranty period for routers (one-year) and accessories (3 months), additional warranty needs to refer to local laws
• Please use standard 12V/1A power adapter
• Any failure or damage to the router that is not used as required by the instructions will invalidate this warranty statement
• Any modification of the board, components, or housing resulting in router failure or damage will invalidate this warranty statement
• Any problems caused by the use of third-party firmware may not be officially supported by the Company
• Any improper use, such as improper input voltage, high temperature, water intake, or damage to the housing, will invalidate this warranty statement
• The images shown in the instruction manual are for informational purposes only, and within the scope of laws and regulations, the right to interpret this commitment shall be vested in Shenzhen Dinghe Communication Co., Ltd.
• The contents of the instructions are subject to change without notice

Statement of hazardous substances in electronic information products

This table is prepared in accordance with SJ/T11364

O: Indicates that the content of the toxic and harmful substance in all homogeneity of the component is below the limit specified in the GB/T26572 standard

X: Indicates that the content of the toxic and harmful substance in at least one homogenous material of the component exceeds the limits specified in the GB/T26572 standard

The “X” shown in this table indicates the use of the EU RoHS exemption for certain hazardous substances in specific applications

This eco-friendly life period applies only to the product working under the conditions specified in the manual

Shenzhen Dinghe Communication Co., Ltd.
1802, Baoyunda Information Building, Baoan, Shenzhen (+86-0755-27678115)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>