MASTECH MY68 Digital Electronic Handheld Multimeter User Guide
- June 12, 2024
- MASTECH
Table of Contents
MASTECH MY68 Digital Electronic Handheld Multimeter
Product Information
- SKU Number: MY68PCBGLO
- Manufacturer: MGL INTERNATIONAL
Locations
- USA: MGL AMERICA, INC.
- UNITED KINGDOM: MGL GROUP U.K. LIMITED
- MEXICO & LATAM: MGL LATAM S.A DE CV
Product Usage Instructions
- Use proper measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Any element of which the insulation is deteriorated (even partially), replace them with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring current, make sure the instrument fuses available and disconnect the power supply to the circuit test.
- Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above the specified limit.
WARNING: The special attention should be paid when using the test and measurement instrument because the improper usage may cause electric shock and damage the equipment.
- Use proper measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Any element of which the insulation is deteriorated (even partially), replace them with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring current, make sure the instrument fuses available and disconnect the power supply to the circuit test
- Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.
Contents
Specifications
HOW TO USE
QR SCAN
Contact Information
- USA: Tel: +1 833-533-5899,
- Email: cs.na@mgl-intl.com
- UNITED KINGDOM: T el: +34 985-08-18-70,
- Email: cs.uk@mgl-intl.com
- MEXICO & LATAM: Tel: +1 833-533-5899,
- Email: cs.latam@mgl-intl.com
EMEA
MGL EUMAN S.L.
- Address: C/ Picu Castiellu, Parcelas i1-i4 33163, Argame Morcín, Asturias, Spain
- Tel: +34 985-08-18-70
- Email: cs.emea@mgl-intl.com
USA
MGL AMERICA, INC.
- Address: 2810 Coliseum Centre Drive, Ste. 100 Charlotte,North Carolina 28217 USA
- Tel: +1 833-533-5899
- Email: cs.na@mgl-intl.com
UNITED KINGDOM
- Address: MGL GROUP U.K. LIMITED 14 Weller St, London, SE1 1QU, UK
- Tel: +34 985-08-18-70
- Email: cs.uk@mgl-intl.com
MEXICO & LATAM
MGL LATAM S.A DE CV
- Address: Colonia Industrial Vallejo Del. Azcapotzalco 02300, Mexico D.F
- Tel: +1 833-533-5899
- Email: cs.latam@mgl-intl.com
APAC MG APPA Corporation
- Address: Flat 4-1, 4/F, No. 35, Section 3 Minquan East Road.Taipei, Taiwan.
- Tel: +886 2-2508-0877
- Email: cs.apac@mal-intl.com
Digital Multimeter Multimetro Digit
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>