KOHLER 27384-BN Vibrant Brushed Nickel Bellera 24 Installation Guide
- June 13, 2024
- Kohler
Table of Contents
KOHLER 27384-BN Vibrant Brushed Nickel Bellera 24 Installation Guide
CAUTION: Risk of personal injury. Do not install where the product might
be used as a grab bar or support bar.
IMPORTANT! When possible, secure the product to a wall stud.
1A. Drill Bits: 1/8″, 1/4″, 5/16″
2A. Recommended Tissue Holder Location: H = 8″ (203 mm) to 12″ (305 mm), W = 6″ (152 mm)
3A. Some Models: Loosen the setscrew and remove the wall plate.
4A. Some Models: Attach the escutcheons to the towel bar.
5A. Two-Post Accessory: Verify that “X” on the template matches your product dimension.
7A. For installation to a stud, drill 1/8″ holes. For installation to drywall between studs, drill 5/16″ holes. For installation to ceramic tile, drill 1/4″ holes.
8A. Installation Between Studs: Use the provided pin to install the drywall anchors.
9A. Installation to Concrete or Tile: Install ceramic anchors.
Need help? Contact our Customer Care Center.
- USA/Canada: 1-800-4KOHLER (1-800-456-4537) Mexico: 001-800-456-4537
- Service parts:com/serviceparts
- Care and cleaning:com/clean
- Patents: com/patents
This product is covered under the KOHLER® Faucet Lifetime Limited
Warranty , found at
kohler.com/warranty. For a hardcopy of
warranty terms, contact the Customer Care Center.
ATTENTION : Risque de blessures. Ne pas installer ce produit dans un
endroit où il pourrait être utilisé comme barre d’appui ou barre de
support.
IMPORTANT! Lorsque possible, fixer le produit sur un montant mural.
1A. Mèches : 1/8 po, 1/4 po, 5/16 po
2A. Emplacement recommandé pour le distributeur de papier : H = 8 po (203
mm) à 12 po (305 mm), l = 6 po (152 mm)
3A. Certains modèles : Desserrer la vis d’arrêt et retirer la plaque
murale