neo NAS-DS07W Wi-Fi Door Sensor Instructions

neo NAS-DS07W Wi-Fi Door Sensor

Product Configuration

Specifications

• Battery: CR123A 3V
• USB power supply: 5V/1A
• Max trigger current : 80mA
• Standby current: 9uA
• Storage Temperature: 0℃ ～ 50℃ (32°F～122°F)
• Storage humidity: 0% ～ 90%RH(Non condensation)
• Bluetooth distribution network: 2.4GHz IEEE801.11b/g/n
• Wireless frequency: 2.4GHz
• Wireless standard: IEEE 802.11b/g/n
• Wi-Fi range: 45
• Main body: 82mm x 27mm x 23mm
• Deputy body: 50mm x 13mm x 16mm

LED State

(Bluetooth network available)

AP Mode| LED light blinks every two seconds

(Bluetooth network available)

Trigger Mode| LED light ashing once
Standby Mode| LED light off
Reset/Toggle

Add Mode

| Press and hold the reset button

for 6 seconds

Note:

1. When powered by USB, the door sensor will not enter sleep mode.
2. Both Smart Wi-Fi mode and AP compatible mode have Bluetooth mode.

Get Started

Download APP

• Download the “Smart life” app from APP Store or Google Play to your mobile.

Register and Login

Launch the “Smart life” app.
2-2 To register,enter your mobile phone number or email address,create a password ,then login to the app. 2-3 Login if you have an account already.

Add Device

Wi-Fi Mode(Default)

• If you have not turned on the Bluetooth function of your phone, please add devices manually.
• Select the “+” symbol on the top right-hand corner.
• Click “Add Device”– Add Manually“Plug(BLE+Wi-Fi)” enter Wi-Fi Mode.

Note:

• If the indicator light is off, please press and hold the reset button for 6 seconds, then add the device according to the status of the indicator light.
• All Wi-Fi products can be added with any Wi-Fi option, and the device only supports 2.4GHz Wi-Fi signals.

Smart Wi-Fi Mode
Press the reset button until the indicator light blink quickly, then follow the APP prompts to add.

AP compatible Mode
Press the reset button until the indicator light blink slowly, then follow the APP prompts to add.

Bluetooth Mode

Bluetooth Pairing(Add Automatically)

• First open the bluetooth function of your phone.
• Then enter the app, the “Devices to be added” window will pop up automatically.

Bluetooth network (Add Manually)

• If it does not automatically pop up, you can add the device by following the steps below.

Functions and Settings

Working Status, Record and Settings 1 Set

Battery level
Display the current power status of the battery

Tamper Alarm
Display the current two states of tamper (tamper alarm or normal), when the door sensor cover is removed, the APP will receive a push notification (the tamper alarm has push and history records)

Alarm Set
On/off(anti-dismantling alarm, door closing alarm, door opening alarm, low battery reminder) alarm push.

Current Status
Display the current on/off status of the door sensor

Open/close prompt
Alerts are updated when the door is opened or closed

APP Record
Historical alarm records and linkage record of added devices in the message center can be viewed

Smart(Intelligent linkage)
Smart Scene which can be associated with other devices

Device Settings

1. Share Device

Remove Device
Clear records; Delete the device through the APP and add the device again to clear the historical record

Push Notification Setting

If it is disabled, all devices in the APP will not receive notification, but message records will not be affected.

You can experience more fuctions of the product with the app, just try and do it yourself. Due to the app update, the above interface is for reference only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>