GEBERIT 969.596.00.0 Urinal System Instructions
- June 4, 2024
- GEBERIT
Table of Contents
GEBERIT 969.596.00.0 Urinal System
Cleaning and care
Please follow the care instructions below.
The manufacturer does not assume any liability for product damage that arises
as a result of incorrect care and handling.
General cleaning recommendations
| Frequency of use | Cleaning interval |
|---|---|
| • Normal | 1 x per day |
| • Medium (in restaurants, for example) | 2 x per day |
| • Frequent (in airports or stadiums, for example) | Several times per day |
Care instructions for sanitary ceramic appliances
- Use standard cleaning agents only in compliance with the respective manufacturer’s information.
- Ensure that the seat of the ceramic appliance or the urinal lid is opened or dismounted during the application time of cleaning agents.
- Only use cleaning agents containing chlorine or ones that are abrasive or scouring in the case of heavy deposits.
- Never use sharp or pointed objects when cleaning.
| Dirt | Care measures |
|---|---|
| For daily cleaning | ▶ Use mild liquid cleaning agents and water. |
▶ Dry the surface with a soft, lint-free cloth.
Stubborn stains
| ▶ Generally speaking, use cleaning agents suitable for ceramic appliances or a mild scouring liquid.
▶ Remove existing limescale deposits using a mild cleaner containing vinegar.
▶ Clean the surface with water.
▶ Dry the surface with a soft, lint-free cloth.
With heavy deposits
| Organic deposits (brown to black in colour):
▶ Clean the affected areas with a standard chlorine cleaner. Note the information provided by the cleaning agent manufacturer. The application time of the chlorine cleaner may not exceed 2 h.
▶ Clean the surface with water.
▶ Dry the surface with a soft, lint-free cloth. Silicate deposits (grey in colour):
▶ Moisten a microfibre cloth with standard ceramic glass cleaner.
▶ Clean the affected areas with in a circular motion. Silicate deposits are very resistant, which means that several cleaning cycles may be required.
▶ Clean the surface with water.
▶ Dry the surface with a soft, lint-free cloth.
Cleaning the diaphragm trap or hybrid trap
Clean the diaphragm trap or the hybrid trap at the recommended intervals.
Cleaning instructions:
- Use a mild, alkaline or slightly acidic cleaning agent.
- After cleaning, rinse with clean water to prevent the cleaning agent affecting the diaphragm.
- Remove deposits and contamination on the diaphragm by immersing it in lukewarm water and then rinsing it with clean water.
- Do not use enzyme tablets or fragrance tablets. When these tablets dissolve and work in combination with cleaning agents, they can form waxy deposits on the diaphragm. This prevents the diaphragm from closing fully.
- Never use solvents.
- Never use strong acids with a pH < 1.
- Protect the diaphragm trap or the hybrid trap from direct exposure to sunlight.
Maintenance
We recommend visually checking the urinal at the intervals outlined below. If odours are starting to accumulate persistently or the urine discharge is not sufficient, replace the diaphragm trap.
| Frequency of use | Maintenance interval |
|---|---|
| • Normal | 2 x per year |
| • Medium (in restaurants, for example) | 4 x per year |
| • Frequent (in airports or stadiums, for example) | 6 x per year |
Replacing the diaphragm trap or hybrid trap
See figure sequence A , page 61 for diaphragm trap.
See figure sequence B, page 62 for the hybrid trap.
Geberit
International AG Schachenstrasse 77, CH-8645 Jona documentation@geberit.com
www.geberit.com
18014405371278987 © 04-2022 969.596.00.0(02)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>