Martin Jerry WiFi Connection User Manual

June 7, 2024
Martin Jerry

Martin Jerry WiFi Connection User Manual
Martin Jerry WiFi Connection

READ HERE FIRST !!!

  1.  The switch must work well manually after installation. If not, go back to the wiring step as below.
  2. Single Pole US-SD-KN01 (click here) | 3-way US-STD-KN01 (click here).
  3. WiFi router should be 2.4G WiFi. CANNOT support 5G (802.11av).
    •  If you are using the dual band wifi router, please set a separate SSID for the 2.4G.
    • If you are using google wifi, which you cannot set a name for 2.4G, please stay far enough from the wifi router until your phone indicates 2.4G wifi connected.

Video Demo of this Manual

https://www.youtube.com/watch?v=JGUM-pCfO7s

Download Smart Life App

Confirm that you have downloaded the right Smart Life App (Same Logo as the right side). If not, download it from the links

QR Code

Set the Switch to Pairing Mode

2.1. After wiring, you will see the indicators flash in RED on the switch. If not, press the Wi-Fi Button.
Wifi Overview

Tech support
https://www.martinjerry.com/support

Pair the switch on App

AP mode wifi Connection

AP mode wifi Connection
AP mode wifi Connection

If the above pairing method fails several times,

Please go to the AP mode mentioned in coming pages

Video Demo:

Play Button
Video 2 – AP mode Wi-Fi connection

Step 1: Set the switch to AP mode

  1. Press and hold the power button for 5-8s until the indicator blinks quickly.
  2. Press and hold the power button for 5-8s until the indicator blinks slowly.

Step 2: Pair the switch on SmartLife App (AP mode)

Pair the switch on SmartLife App
Pair the switch on SmartLife App

Then, Connect the Hotspot from the Switch — > Back to App for pairing.

Connect the Hotspot from the Switch

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals