Wanderings PWDE46A All in One Card Envelopes User Guide
- June 1, 2024
- Wanderings
Table of Contents
DESIGN & PRINTING GUIDE
ALL-IN-ONE INVITATION ENVELOPE
Thank you for purchasing Wanderings All-in-One Card Envelopes, a convenient
and elegant alternative to plain paper and envelopes.
This guide is intended to assist you in designing, printing and sealing your
All-in-Ones.
If you require further information, or have any comments or concerns, please
do not hesitate to contact us at:
[email protected].
ALL-IN-ONE PRODUCT OVERVIEW
MATERIAL
Thick 300 GSM White Deckle Edge Paper,
handmade using 100% recycled cotton.
MULTI-MEDIA
Supports most media including watercolor, acrylic,
ink, gel pen, marker, pencil and charcoal.
FLAT DIMENSIONS
6″ x 10.75” / 152.4 mm x 273.05 mm
FOLDED DIMENSIONS
4” x 6″ / 101.6 mm x 152.4 mm
HOME PRINTER FRIENDLY
See Instructions on Page 5.
FOLDED ALL-IN-ONE SHOWN AT ACTUAL SIZE 6” x 4″ | 152.4 mm x 101.6
mm
*Dimension may vary slightly due to the nature of the handmade
paper making process.
ALL-IN-ONE DIMENSIONS
Please Note: Due to the handmade paper making process, product measurements
may vary slightly from those shown. 
TEXT & ARTWORK LAYOUT TIPS
Please Note: If you intend to print on the outside flap the artwork and/or
text needs to be positioned upside-down so it is in the correct orientation
when folded.
HOME PRINTING TIPS
Results may vary due to individual home printer settings and tolerances.
Prior to folding, please allow adequate time for ink to dry.
If home printing, feed from the bottom, one sheet at a time from the manual
feed tray. Your artwork will need to be rotated 180 degrees as shown in the
illustrations below.
ALL-IN-ONE SEALING TIPS
Please note, handmade All-in-One Invitation Envelopes are not self
sealing—there are no adhesive strips on the flap. They are designed to use
with a traditional wax seal, adhesive-backed seal, or sticker.
Prior to folding and sealing, allow adequate time for ink to dry.