MITSUBISHI ELECTRIC MAC-1702RA-E Connector Cable Adapter Instruction Manual
- June 13, 2024
- Mitsubishi Electric
Table of Contents
MAC-1702RA-E Connector Cable Adapter
Instruction Manual
MAC-1702RA-E Connector Cable Adapter
Connector Cable
Models MAC-1702RA-E
MAC-1710RA-E
[FOR INSTALLER]
INSTALLATION MANUAL
Outline
This product is an adapter which inputs the incoming signals from an open/close switch to the air conditioner.
Card key/Window connection with the open/close switch
-
How to connect the open/close switch
• Connect the connector to CN104 on the Indoor Electronic Control P.C. Board.
• Connect the electrical wires with the tag of “IN” to the switch.
• Separately insulate the wires with the tag of “OUT”.
-
Operation details
• Closing the switch stops operation of the air conditioner.
A remote controller is enabled even the switch is close.
To disable the remote controller, cut JR88 on the Indoor Electronic Control P.C. board.
• When the switch opens, the ON/OFF operation from the remote controller is enabled.
MITSUBISHI ELECTRIC CORPORATION
HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI,
CHIYODA-KU, TOKYO 100-8310, JAPAN
Documents / Resources
|
MITSUBISHI ELECTRIC MAC-1702RA-E Connector Cable
Adapter
[pdf] Instruction Manual
MAC-1702RA-E Connector Cable Adapter, MAC-1702RA-E, Connector Cable Adapter,
Cable Adapter, Adapter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>