LAMAX Dots2 Play Wireless Earbuds User Guide

: June 13, 2024
: LAMAX

Table of Contents

LAMAX Dots2 Play Wireless Earbuds
Product Information
Product Usage Instructions
Controls
Switching On
Switching Off
Pairing
Parameters
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LAMAX Dots2 Play Wireless Earbuds

Product Information

Product Name: Dots2 Play
Wireless Technology: Bluetooth 5.1
Max. Pairing Distance: Up to 10 meters
Supported Codecs: AAC, SBC
Earphone Battery Capacity: 40 mAh
Charging Station Capacity: 400 mAh
Earphone Charging Time: 1.5 hours
Playback Time: Up to 7 hours
Weight of One Earphone: 4 g
Weight with Charging Station: 36 g

Product Usage Instructions

Switching On:
The earphones turn on automatically when removed from the charging station. To switch on manually, press and hold the multifunction button for 3 seconds. When switched on, there is an audible sound and the blue LED flashes.

Switching Off:
The earphones turn off automatically when inserted into the charging station. To turn off manually, hold the multifunction button for 3 seconds. When switched off, an audible notification sounds and the red LED flashes. If the headphones are out of the charging case, turned on, and not connected to a device, they will automatically turn off after 3 minutes.

Pairing:

Remove the earphones from the charging station. The earphones will automatically connect to each other, and an audible notification will sound. The LED in the headphones will flash alternately blue and red.
Turn on Bluetooth on your device and look for “LAMAX Dots2 Play” in the list of available Bluetooth devices. After successful pairing, you will hear an audible notification.

If you have pairing problems, follow these steps:

Remove the headphones from the list of paired devices on your phone.
Remove the headphones from the charging station and press the multifunction button on both headphones 5 times. The LED in the headphones flashes red 5 times.
Put the headphones back in the charging station and pair them according to step 1.

Charging:
To charge the charging station, connect the cable to the USB-C port on the back and plug the other end of the cable into a USB power supply with a maximum voltage of 5V. When charging, the LEDs will light up gradually according to the charge status. When fully charged, all 4 LEDs will be lit. To charge the earphones, insert them into a charged charging station. The LED light in the headphones flashes twice and then turns red during charging. When fully charged, it goes out.
Note : The latest version of the user guide can be downloaded here.

Controls

Turn On Hold down the multifunction button for 3 seconds
Turn Off Hold down the multifunction button for 5 seconds
Play / Pause Press the multifunction button
Volume up Press the right multifunction button twice
Volume down Press the left multifunction button twice
Next Track Hold the right multifunction button 2 seconds
Previous Track Hold the left multifunction button 2 seconds
Answer/End Call Press the multifunction button
Reject Call Hold the multifunction button for 1 second
Activate Mobile Assistant Press the multifunction button 3 times

Switching On

The earphones turn on automatically when removed from the charging station. To switch on manually, press and hold the multifunction button for 3 seconds. When switched on, there is an audible sound and the blue LED flashes.

Switching Off

The earphones turn off automatically when inserted into the charging station. To turn off manually, hold the multifunction button for 3 seconds. When switched off, an audible notification sounds and the red LED flashes. If the headphones are out of the charging case, turned on and not connected to a device, they will automatically turn off after 3 minutes.

Pairing

Remove the earphones from the charging station. The earphones will automatically connect to each other and an audible notification will sound. The LED in the headphones will flash alternately blue and red.
Turn on Bluetooth on your device and look for LAMAX Dots2 Play in the list of available Bluetooth devices. After successful pairing, you will hear an audible notification.

If you have pairing problems, remove the headphones from the list of paired devices on your phone. Remove the headphones from the charging station and press the multifunction button on both headphones 5 times. The LED in the headphones flashes red 5 times. Then put them in the charging station and pair them according to the point

Charging

To charge the charging station, connect the cable to the USB-C port on the back and the end of the cable into a USB power supply with a maximum voltage of 5V. When charging, the LEDs will light up gradually according to the charge status. When fully charged, all 4 LEDs will be lit.
To charge the earphones, insert them into a charged charging station. The LED light in the headphones flashes twice and then turns red during charging. When fully charged, it goes out.