DOLPHIN SNB-1100S 2.2 Channels Bluetooth Sound Bar User Manual
- June 13, 2024
- DOLPHIN
Table of Contents
DOLPHIN SNB-1100S 2.2 Channels Bluetooth Sound Bar
Product Information
The 2.2 Channels Bluetooth Sound Bar with Built-in Subwoofer is a powerful audio device designed to enhance your audio experience. With a model number of SNB-1100S, this soundbar offers a range of features and technical specifications
- Audio output : 130W RMS
- Speaker drivers: 4 x 2.25 15W units + 2 x 3.5 35W Built-in subwoofer units
- Frequency : 50Hz~20KHz
- SNR : 75dB
- Bluetooth version : 5.3
- Bluetooth range : Up to 10m
- Connections : USB 2.0, AUX in, Optical, Coaxial, HDMI(ARC), AC IN
- Power supply : AC 100-240V
- Dimensions : 975 x 158 x 75mm
Product Usage Instructions
Installation
Ensure that you follow these installation guidelines
- Do not install the unit in or near a place where it may come in contact with rain, moisture, or other liquids.
Connections
The soundbar has multiple connection options
- USB : For USB media mode
- AUX : For auxiliary input mode
- OPT : For optical mode
- COA : For coaxial mode
- ARC : For HDMI(ARC) mode
Remote Control & Function Keys
The remote control has several function keys
- POWER ON/OFF : Turns the soundbar on or off
- MODE : Shifts between BT/USB/AUX/OPTICAL/COAXIAL/HDMI(ARC) modes
- TREBLE+ and TREBLE-: Increase or decrease the treble
- BASS+ and BASS -: Increase or decrease the bass
- VOL+ and VOL -: Increase or decrease the volume
Using Bluetooth Mode
To use the soundbar in Bluetooth mode
- Press the BT button on the remote control to shift into BT mode.
- In BT mode, hold the BT button to enter pairing mode for connecting your phone to the soundbar.
- Short press the BT button to disconnect the Bluetooth connection between the phone and the soundbar.
Using Optical Mode
To use the soundbar in optical mode
- Press the OPT button on the remote control or repeatedly press the MODE button on the soundbar control panel until OPT is displayed on the LED display.
- Ensure that Optical SPDIF is selected as the TV’s audio output.
- Adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.
Note: For detailed safety information and FCC compliance, please refer to the user manual provided with the product.
A compact yet powerful Bluetooth soundbar with sleek looks and excellent audio response. 6 built-in speakers and 2 bass air tube holes provide clarity across a broad frequency range, with crisp highs and deep bass. An integral USB port enables playback of media files directly from compatible media, with further flexible input options including Aux, optical, coaxial, HDMI(ARC) and Bluetooth. A convenient and cost-effective TV audio upgrade that doesn’t compromise on performance.
- 6 speakers for crisp, clear sound with deep bass
- Built-in two woofers with heavy bass.
- Built-in 2.2 channel amplifier with 3 EQ presets
- Versatile input options to support a range of devices
- USB port for media playback
- Remote control and audio connection leads included
Matters Need Attention
- Don’t put this product under high temperature wet environment and it will be worse when it is in the rain or crash strongly.
- To reduce the risk or electronic shock or fire, do not remove the cabinet cover simply contact a service professional.
- In the case occurrence of malfunction, do not attempt to repair the unit on your own. Contact a certified service professional for a proper diagnosis and repair.
- If fragments or liquids fall into device box, please cut off the power. And it can be used only after professional staff checks it.
- Don’t install the unit in or near a place where it may come in contact with rain, moisture or other liquids.
Technical Specifications and Features
- Audio output: 130W RMS
- Speaker drivers : 4 x 2.25″ 15W units + 2 x 3.5″ 35W Built-in subwoofer units
- Frequency : 50Hz~20KHz
- SNR : ≥75dB
- Bluetooth version : 5.3
- Bluetooth range : Up to 10m
- Connections : USB 2.0, AUX in, Optical, Coaxial, HDMI(ARC), AC IN
- Power supply : AC 100-240V
- Dimensions ：975 x 158 x 75mm
Connections
- USB IN : Use to connect a flash drive for direct media playback (FAT32 format and 128GB max).
- OPTICAL IN : Use to connect compatible devices using an optical cable (not provided).
- COAXIAL IN : Use to connect compatible devices using a coaxial cable (not provided).
- HDMI(ARC ): Use to connect compatible devices using a HDMI cable (not provided).
- AUX IN : Use to connect compatible devices using the 3.5mm – 3.5mm stereo jack cable (provided).
- AC IN : Use to connect the AC power supply.
- ON/OFF : Use to turn on or turn off the device.
LED display
- Red LED : Standby mode
- bt : Bluetooth mode
- USB : USB media mode
- AUX : Auxiliary input mode
- OPT : Optical mode
- ARC : HDMI(ARC)mode
- COA : Coaxial mode
Remote Control & Function Keys 
Input Functions
- Power on/off : Press the Power on/off button on the remote control or soundbar control panel to turn the unit on and off.
- REMARK: When unit is idle for 3 minutes, the display will be auto turn off.
- HDMI(ARC ): Connect an HDMI ARC compatible device to the HDMI(ARC) port on the soundbar using a HDMI cable (not supplied). Select HDMI(ARC) mode either by pressing the HDMI(ARC) button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until ARC is displayed on the LED display. Ensure HDMI ARC is selected as the TV’s audio output, then adjust the volume of soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.
- AUX in : Connect a compatible device using the 3.5mm – 3.5mm stereo jack cable. Select AUX mode either by pressing the AUX button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until AUX is displayed on the LED display. Ensure the connected device is producing an audio signal, then adjust the volume of soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.
- Optical in : Connect a compatible device to the OPTICAL input on the soundbar using a digital optical cable (not supplied). Select OPT mode either by pressing the
- OPT button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until OPT is displayed on the LED display. Ensure Optical SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.
- Coaxial in : Connect a compatible device to the COAXIAL input on the soundbar using a digital coaxial cable (not supplied). Select COAX mode by repeatedly pressing the MODE button on the soundbar control panel until COA is displayed on the LED display. Ensure Coaxial is selected as the TV’s audio output, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.
- Bluetooth : Short press the BT button on the remote control or repeatedly pressing the MODE button on the soundbar control panel until bt is shown on the LED display. The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device you wish to connect is also in pairing mode and search for “SNB-1100S” in its device list. When the two devices are paired, the LED display on the soundbar will stop flashing and remain constant. (The soundbar will now automatically re-pair with this device whenever it is within range and has Bluetooth turned on.) Once paired, the remote control can be used to play, pause and navigate between tracks on compatible iOS and Android devices.
Note: Hold the BT button on the remote control to disconnect the Bluetooth connection between the phone and the soundbar; short press is shifting to BT mode.
- USB media mode : The soundbar is compatible with USB flash drives of up to 128GB in size and can play audio files directly. Simply insert a compatible drive into the USB port on the back of the soundbar and the unit will automatically switch to USB mode and play the first compatible track. The media controls on the remote control can be used to play, pause and navigate between tracks on the flash drive, and the LED display will indicate the current track time.
- USB repeat mode (also accessed via the remote control) enables single track repeat (ONE), all track repeat (ALL)
- The media player also has a memory function that will recall and continue from the last-played point when a USB flash drive that has previously been used with the soundbar is reinserted.
- Equalizer modes : The soundbar has 3 equalizer presets, tailored to complement various styles of music. Press the EQ button on the remote to choose between Music (EQ1), Movie (EQ2), News (EQ3).
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>