Minka 71174 3 Light Flushmount Light Instruction Manual
- June 13, 2024
- MINKA
Table of Contents
INSTALLATION INSTRUCTIONS
Model #71174
READ AND SAVE THESE INSTRUCTIONS
-
Shut off power at the circuit breaker and remove old fixture including mounting hardware.
-
Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
-
Unscrew the cap nut (F).
-
Pull black and white wires out of electrical outlet box (A).
-
Attach single bar (B) using Outlet Box Screws (D ) to the outlet box (A). The side of the single bar marked “GND” must face out (Fig 1).
-
Connect the electrical wires as shown in Fig.2.
Making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture ‘s Ground wire to it. Otherwise, connect the fixture’s Ground wire directly to the cross bar using the Green Screw (C ) provided. -
Place the cage (G) into the nipple (E) and secure it tightly against the wall using cap nut (F). (Fig 1)
-
Install the light bulbs in accordance with the fixture specification DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Your installation is now complete. Return power to the outlet box and test the
fixture.
“CAUTION-RISK OF FIRE, CONSULTA QUALIFIED ELECTRICIAN TO ENSURE.
CORRECT BRANCH CIRCUIT CONDUCTOR”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>