V I V O DESK-V123EB-EW Curved Corner Triple Motor Electric Desk Instruction Manual
- June 13, 2024
- V I V O
Table of Contents
V I V O DESK-V123EB-EW Curved Corner Triple Motor Electric Desk
Product Information
The Electric Multi Motor Corner Desk Frame is a versatile desk frame designed for easy height adjustment. It comes with a controller that allows you to customize the desk height and store different height settings in memory. The control unit is equipped with a gyroscope sensor and must be fixed to the desk for proper operation.
Product Details:
- SKU: DESK-V123EB/EW
- Manufacturer: VIVO
- Website: https://vivo-us.com/products/desk-v123eb
- Contact: help@vivo-us.com | 309-278-5303
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
Instruction Manual https://vivo-us.com/products/desk-v123eb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
WARNING
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND
ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
- DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED. DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
- NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
- NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
- ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
- OUTDOOR USE IS PROHIBITED.
OPERATING CONTROL PANEL
PLEASE NOTE
The control unit has a gyroscope sensor and MUST be fixed to the desk for
correct operation.
OPERATING INSTRUCTIONS: When the system is powered on, the existing desktop height will appear on the control panel.
Upward and Downward Movement
Press and hold the up or down arrow until the desk reaches the desired height.
Memory Mode
To store a certain height in the controller’s memory, first press “M”. The
current height will begin flashing on the display. Now press “1”, “2”, “3” or
“4” within six seconds to store the current height in memory. Each number can
store a different height. Once in memory, you can recall any of the four
height settings by pressing the corresponding button. Touching any button will
stop the automatic adjustment.
Power-Saving Mode
When no actions are made for over 2 minutes, the system will enter power-
saving mode. Touch any button to enter operating mode.
Function Mode
Press and hold the “M” button for 3 seconds, or until “S – -” begins flashing
on the display. Press “M” again to enter Function mode. Within function mode,
use the up and down buttons to scroll through settings, and use the “M” button
to select options. If no action is taken for 20 seconds, the desk will return
to operating mode.
- Change Displayed Unit (Un): Press the up or down buttons until the display shows “Un”, and press “M” to select. Press up or down to select “SI” (metric) or “In” (imperial). Hold “M” for 2 seconds to save the setting.
- Change Brightness (br): Press the up or down buttons until the display shows “br”, and press “M” to select. Press up or down to select Low (L), Normal (n) or High (H) brightness. Hold “M” for 2 seconds to save the setting.
- Collision Force Detection (CF): Press the up or down buttons until the display shows “CF”, and press “M” to select. Press up or down to select “OFF”, Low (L), Normal (n) or Heavy (H) collision force detection. Hold “M” for 2 seconds to save the setting.
Reset Mode
While the unit is powered on, press the down arrow until the desk moves to the
fully lowered position. Press and hold the down arrow for 5 seconds or until
“rES” is displayed to enter reset mode. The desk will move down to the lowest
possible height and then move back up slightly. The desk will then return to
operating mode.
- E20 – Desk Overload: If overloaded while moving up, error will clear after 3 seconds. If overloaded moving down, unplug desk for 10 seconds then reconnect power.
- Circuit Protection: If motor or controller becomes disconnected, the desk will cease operation. Error will clear after all components are reconnected.
TROUBLESHOOTING
PLEASE NOTE
The control unit has a gyroscope sensor and MUST be fixed to the desk for
correct operation.
NOTES
- Self-protection function: The unit will enter a protective mode should the system operate continuously in excess of 2 minutes with “HOT” on the controller display. The system will return to normal operation after approximately 18 minutes.
- Do NOT remove or reconnect power to reset the unit when in a protective or “HOT” state, as this may damage the electronics.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
- help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Electric Multi Motor Corner Desk Frame with Memory Controller – VIVO - desk solutions, screen mounting, and more