Queclink GV301TP 4G WW GNSS Tracker App User Manual

: June 10, 2024
: Queclink

Table of Contents

Introduction
Product Overview
Getting Started
CE Declaration
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Queclink GV301TP 4G WW GNSS Tracker App User Manual

Document Title	GV301TP 4G WW User Manual
Version	1.00
Date	2022-07-29
Status	Released
Document Control ID	QSZTGV301TPMGUM0100

General Notes

Queclink offers this information as a service to its customers, to support application andengineering efforts that use the products designed by Queclink. The information providedis based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including anyinformation that may be in the customer’s possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of thecustomer or the customer’s system integrator. All specifications supplied herein are subject tochange.

Copyright

This document contains proprietary technical information which is the property of Queclink. Copying of this document, distribution to others or using or communication of the contents thereof is forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specifications supplied herein are subject to change without notice at any time.

Revision History

Revision	Date	Author	Description of change
1.00	2022-07-29	Eddy Qi	Initial

Introduction

The GV301TP 4G WW is a powerful GPS locator designed for vehicle or asset tracking. It has superior receiver sensitivity, fast TTFF (Time to First Fix) and supports EGPRS/LTE Cat-M1/LTECat-NB2/GPS tracker. Its location can be monitored in real time or periodically tracked by abackend server or other specified terminals. It has Bluetooth. The GV301TP 4G WWhas multipleinput/output interfaces that can be used for monitoring or controlling external devices. Basedonthe integrated @Track protocol, the GV301TP 4G WW can communicate with a backend server through the network to transfer reports of emergency, geo-fence boundary crossings, lowbackup battery and scheduled GPS position as well as many other useful functions. Users canalso use GV301 TP 4G WW to monitor the status of a vehicle and control the vehicle by its external relay output. System integrators can easily set up their tracking systems basedon thefull-featured @Track protocol.

Reference

Table 1.GV301TP 4G WW Protocol Reference

SN	Document name	Remark
[1]	GV301TPMG @Track Air Interface Protocol	The air protocol interface

between GV301TP 4G WW and backendserver.

Terms and Abbreviations

Table 2.Terms and Abbreviations

Abbreviation	Description
AIN	Analog Input
DIN	Digital Input
GND	Ground
RXD	Receive Data
TXD	Transmit Data

Product Overview

Check Parts List

Before starting, check whether the product is intact. If anything is missing, please contact your supplier.

Figure 1. Appearance of GV301TP 4G WW

Parts List

Table 3.Parts List

Name	Picture
GV301TP 4G WW Locator	12285.224.2 mm
Tracker Cable
OBD Cable
GPS Antenna (Optional)
Debug Cable (Optional)

Interface Definition

16-pin interface

16	15	14	13	12	11	10	9
8	7	6	5	4	3	2	1
PIN NO.	PIN Name	Description
---	---	---
1	MICP	Microphone input+
2	AGND	Microphone ground (-)
3	IGN	IGN signal input
4	UARTO_RX	RS232 conned to external device TX
5	UARTO_TX	RS232 conned to external device RX
6	GND	Signal ground (-)
7	OUT3	Voltage output 3(5V/ 1-WIRE power support)/ Negative output3
8	OUT2	Voltage output 2(12V)/ Negative output2
9	EARP	Audio out +
10	EARN	Audio out –
11	VIN	Power supply (Range 8V to 32V DC)
12	AD2/IN2	Analog input 2/ Negative triggered 2
13	ADI/IN1	Analog input V Negative triggered 1
14	OUT1	Negative output 1
15	OUT4/IN3	Voltage output 4(12V) / Negative output4/ Negative triggered 3
16	1-WIRE DATA	1-WIRE bus

14-pin interface

14	13	12	11	10	9	8
7	6	5	4	3	2	1
PIN No.	PIN Name	Description
---	---	---
1	OBD1	High Speed CANH /Low Speed CANH / Single Wire CAN BUS
2	OBD15	ISO L-Line
3	OBD3	HS CANH
4	Chassis Ground	Chassis Ground
5	Signal Ground	Signal Ground
6	OBD6	HS CANH
7	OBD7	ISO K7-Line
8	OBD8	HSCANL
9	OBD9	HS CANL /LS CANL
10	VCC signal	VCC (8V-32V DC only used to detect for OBD port insert)
11	OBD11	HSCANL
12	OBD12	ISO K12-Line/HS CANH
13	OBD13	HSCANL
14	OBD14	HSCANL

Getting Started

Open the Case

Figure 2.Open the Case

Loosen the screws at the back of the device.

Installing a SIM Card
Open the case and ensure the unit is not powered (unplug the cable and unplug the internal battery). Slide the holder to open the SIM card holder. Insert the SIM card into the slot. Take careto align the cut mark. Close the SIM card holder. Close the case.

Device Status LED

Note:

CEL LED cannot be configured.

LED| Device status| LED status
CEL(Note 1)| Device is searching network.| Fast flashing(Note 3)
Device has registered to network.| Slow flashing(Note 4)
SIM card needs pin code to unlock.| ON
GPS(Note 2)| GPS chip is powered off.| OFF
GPS sends no data or data format error occurs.| Slow flashing
GPS chip is searching GPS info.| Fast flashing
GPS chip has gotten GPS info.| ON
PWR(Note 2)| No external power and internal battery voltage is lowerthan 3.35V.| OFF
No external power and internal battery voltage is below3.5V.| Slow flashing
External power in and internal battery is charging.| Fast flashing
External power in and internal battery is fully charged.| ON
2. GPS LED and PWR LED can be configured to turn off after a period of time by using theconfiguration tool. 3. Fast flashing: for GSM LED is about 60 ms ON/780 ms OFF; for GPS LED and PWR LED is about 100 ms ON/100 ms OFF. 4. Slow flashing: for GSM LED is about 60 ms ON/1940 ms OFF; for GPS LED and PWR LEDis about 600 ms ON/600 ms OFF.

CE Declaration

Hereby, Queclink Wireless Solutions Co., Ltd. declares that the radio equipment type GPS tracker is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.queclink.com/

FCC Caution.

§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Changes or modification warning.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
  RF warning for Mobile device:
  This equipment complies with FCC radiation exposure limits set forth for an uncontroll environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operatinginconjunction with any other antenna or transmitter.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity
Hereby, [Targa Telematics spa] declares that the radio equipment type [designation of type of radio equipment] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
WWW.TARGATELEMATICS.COM

Operating Temperature: -20℃ ~ +60℃
RF exposure statement
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm dist ance between the device and human body.