GOTO 06336 10-11 Inch Universal Folio Bluetooth Keyboard User Manual
- June 5, 2024
- GOTO
Table of Contents
GOTO 06336 10-11 Inch Universal Folio Bluetooth Keyboard
Attaching your tablet to the folio:
Attach your tablet to the Universal Folio using the elastic straps on each corner.
Connecting your tablet to the XXXXX Bluetooth Keyboard:
Locate the OFF/ON switch on the Bluetooth Keyboard and slide to the ON position. Note: The power light will flash green, but will not remain on for maximum battery life.
iOS USERS
- Note: Works best with iOS 13 and later.
- Tap the SETTINGS icon on your Apple device.
- Tap on BLUETOOTH and tap to turn ON.
- Press down on Fn+C button until the Status light on the keyboard flashes.
- Find and tap on Bluetooth 3.0 Keyboard in the DEVICES list, this pairs/connects the keyboard to your device.
- Press down on Fn+Q button for iOS system functions
- Your XXXXXX Bluetooth Keyboard is ready to use!
iOS Trackpad
- Note: iOS 13 or later required
- Tap the SETTINGS icon on your Apple device.
- Tap the ACCESSIBILITY icon on your Apple device.
- Tap the TOUCH icon on your Apple device.
- Tap on ASSISTIVETOUCH on your Apple device.
- Tap on ASSISTIVETOUCH again to turn on the trackpad cursor.
ANDROID USERS
- Note: Works best with Android version 9.0 and above. The steps may vary based on tablet make and model
- Tap the SETTINGS icon on your Android tablet.
- Tap on CONNECTED DEVICES (some tablets may say CONNECTIONS)
- Tap on BLUETOOTH and tap to turn ON.
- Press down on the Fn+C button until the Status icon on the keyboard flashes.
- Tap SEARCH FOR DEVICE on your tablet.
- Find and tap on Bluetooth 3.0 keyboard in the AVAILABLE DEVICES list, this pairs/connects the keyboard to your device.
- Press down on Fn+W button for Android system functions
- Your XXXXXX Bluetooth Keyboard is ready to use!
Charging your XXXXXX Bluetooth Keyboard
When the battery is low, the POWER indicator light will begin to flash. 1.Using the included charging cable, insert the MicroUSB connector to your Bluetooth Keyboard. 2.Plug the USB-A connector into a power adapter or your computer 3.The CHARGE indicator light will be red when charging. When the keyboard is fully charged, the light will go off.
Tips:
- In an effort to save energy, the keyboard will go into SLEEP mode after 10 minutes. Press any key on the keyboard to WAKE it up – this may take a few seconds.
- DO NOT USE any other cable for charging.
- Please note the function keys may vary based on tablet make and model.
SPECIAL FUNCTION KEYS
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.