brinno BCC100 Construction Time Lapse Camera User Guide

: June 13, 2024
: brinno

Table of Contents

brinno BCC100 Construction Time Lapse Camera
Product Information
Product Usage Instructions
Contact Information
BOX CONTENT
INSTALLATION
Optional Accessory
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

brinno BCC100 Construction Time Lapse Camera

Product Information

The TimeLapse Construction Camera – BCC100 is a weather-resistant camera designed for construction projects. It comes with a TimeLapse Camera (TLC200 f1.2), a Weather Resistant Housing (ATH110), a Camera Wall Mount (AWM100), and a Rubber Strap.

Product Usage Instructions

STEP 1: BCC100 Installation
Seal: Insert an SD Card and switch on the Time Lapse Camera power.
Insert the Time Lapse Camera into the Weather Resistant Housing, ensuring the waterproof seal is aligned correctly.
Keep the inside of the Weather Resistant Housing dry before inserting the Time Lapse Camera.
Please make sure the Time Lapse Camera lens is positioned correctly to fit into the transparent lens of the Housing.
Close the Weather Resistant Housing door and latch the buckles (Top and bottom).
STEP 2: Start Recording
The LCD will display the set up screen. Set the Time Interval and AVI frame rate based on your project duration.

  *  **Suggestion:**
    * For days: 5 Seconds, 30 FPS
    * For months: 10 Minutes, 30 FPS
    * For weeks: 1 Minute, 30 FPS
    * For more than 6 months: 10 Minutes, 30 FPS
2. Press OK to proceed to the Preview Screen and frame your subject.
3. Press OK again to start the recording process.

STEP 3: Installation
Choose one of the installation options:

  * A: Use the Camera Wall Mount (AWM100) to fix the camera.
  * B: Use the Rubber Strap to secure the camera.
2. Lock: You can lock your time lapse camera on site to prevent theft.

STEP 4: Finish
- Optional Accessory: Brinno Reader (ABR100)
- Play your construction time lapse video on your smartphone on site using the Brinno High Speed On The Go (OTG) Reader (ABR100).
  Note that your smartphone needs to support OTG for this function.
- Optional Accessory: Motion Sensor (ATM100)
- Upgrade the time lapse camera to a motion-activated camera that detects any movement in the area. Great for security purposes.

Contact Information

Brinno Inc.
7F, No.75, Zhou Zi St., Taipei City11493, Taiwan
Phone: +886-2-8751-0306
Fax: +886-2-8751-0549
Email: [email protected]
Website: www.brinno.com
Made in Taiwan

BOX CONTENT

TimeLapse Camera (TLC200 f1.2)
Weather Resistant Housing(ATH110)
Camera Wall Mount(AWM100)
Rubber Strap

INSTALLATION

STEP 1. Insert an SD Card and switch on the Time Lapse Camera power.
STEP 2. Insert the Time Lapse Camera into the Weather Resistant Housing, confirming the waterproof seal is aligned correctly.

Keep the inside of the Weather Resistant Housing dry before inserting the Time Lapse Camera.

STEP 3. Please make sure the Time Lapse Camera lens is positioned correctly to fit into the transparent lens (Housing).

Close the Weather Resistant Housing door and latch the buckles (Top and bottom).

STEP 4. Start Recording

1. The LCD will display the set up screen.
2. Set the Time Interval and AVI frame rate.

Suggestion
Depending on big or small construction project, we suggest below setting:

  *  **For days**

5 Seconds 30 FPS

  *  **For weeks**

1 Minute 30 FPS

  *  **For months**

10 Minutes 30 FPS

  *  **For > 6 months **

10 Minutes 30 FPS
More than 6 months using , please choosing Energizer® Ultimate Lithium AA Batteries.

3. Press OK to proceed to the Preview Screen, frame your subject.
4. Press OK again to start the recording process.

STEP 5. Installation
STEP 6. Finish
- While recording, hold the “OK” button until the LCD light turns on and shows the text “Processing”, it means the camera is processing file closing.When completed the processing it will display the text “Ready”.
- This indicates the recording session is complete.
- Remove the SD card from the camera, and insert it into your computer or laptop to enjoy vour amazing Time Lapse Videos!

Optional Accessory

Brinno Reader (ABR100)
- Play your construction time lapse video on your smartphone on site.
- No need to go back to the office with the Brinno High Speed On The Go (OTG) Reader (ABR100)
  *Your Smartphone needs to OTG for this function.
Motion Sensor (ATM100)
Upgrade the time lapse camera to a motior activated camera, detecting any movement in thearea. Great for Security.