DPF-5186 WPF MUSE User Manual

DPF-5186 WPF MUSE

WIFI PHOTO FRAME

LOCATION AND DESCRIPTION OF CONTROLS

1. LED display
2. OPEN/CLOSE button
3. Micro SD (TF) card slot
4. Micro USB port
5. DC IN jack
6. Reset: Use a needle or paper clip to reset unit.

POWER SUPPLY

Using the AC adaptor

• The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V and should only be connected to a mains supply within these parameters.

Cautions

• The AC adaptor included with this unit is for its use only. Do not use it with other equipment.
• Turn off the unit before unplugging the AC adaptor from the unit so as to avoid the unit being damaged.
• When the unit is not going to be used for long time, disconnect the AC adaptor from the AC outlet.
• Be sure to use it near the wall outlet and easily accessible. If a malfunction occurs, disconnect the plug from the wall outlet at once.
• AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains socket outlet completely.
• Never use an AC adaptor that is damaged, route power lead in a safe manner and make sure it is not subjected to trapping or pinching. If the power lead is damaged refer to a qualified service agent.

DOWNLOAD FRAMEO APP

• To send photos to your frame, you need to download the Frameo app for iOS or Android.

• Or find the Frameo app by scanning this code:

• For iOS or Android.

• For Android: Search for “Frameo” on Google Play.

• For iOS: Search for “Frameo” on App Store.

FRAMEO SET UP

When starting your frame for the first time, you will need to set up the frame.

1. Select a language. This will be the language used on the Frameo.
2. Connect your frame to the internet by connecting it to Wi-Fi.
3. Verify or correct the date and time.
4. Frameo may ask you to update to the latest version. It is recommended to update your frame before continuing if asked to.
5. Enter your name, and the location where you have placed your frame e.g. “John Doe” and “Living room”, “Kitchen” or “Office”. Finally set the time zone if not already correct.

START USING FRAMEO

1. Next step is to connect Frameo with your friends and family by providing them with a code from your frame.
2. If you want to be able to send photos to the frame yourself, start by downloading the app for iOS or Android on App Store or Google Play. Then use the code to connect your frame and app as described below.

Connecting a new friend

1. Make sure that your friend has downloaded and installed the Frameo app.
2. Click the add friend icon on your frame . A dialog will appear showing a connection code, which is valid for 12 hours.
3. Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone call, to your friend.
4. Once your friends have added the code in their Frameo app, they will automatically appear on your frame and be able to send you photos.

NAVIGATING YOUR FRAMEO

1. Swipe left or right to go through your photos.
2. To access the menu, simply tap once on the screen.

GERNERAL SETUP PAGE

Add friends

• This will generate a code that you can share with your friends and family so they can connect and send photos to your frame.

Settings My frame

Frame name

• Changes the name of your frame. This is also the name that connected friends and family will see in their list of connected frames in the smartphone app.

Frame location

• Changes the location of your frame. This is the location displayed on your friends’ and family’s list of connected frames which can help to distinguish frames from each other.

Set language

• Sets the language used on the frame.

Date

• Sets the date used on the frame.

Time

• Sets the time used on the frame.
• Frameo will automatically try to set the correct date and time when connected to the internet.

Time zone

• Sets the time zone used on the frame.

Enable/Disable 24-hour format

• Enables, and disables, 24-hour time format.

Manage photos

• In the manage photos menu you can see how many photos are on your frame and the storage they use. You can also see the amount of storage left available on your device for storing new photos.

Show/hide photos

• Select which photos to hide by tapping them.
• Use to hide or show all photos.
• Noted: Hidden photos will NOT be deleted from your frame and you can always select them to be shown again.

Delete photos

• Select photos that you want to permanently delete from your frame by tapping the photo.
• Use to select or deselect all and to permanently delete the selected photos.

Import photos

1. Before you try to import photos, make sure you have an external storage.
2. To import photos, insert an USB device (not included) to Micro USB port/or to insert micro SD card(not included) in the card slot.
3. Start by selecting the photos that you want to import onto your frame. Once selected tap the import button to start the import process.
4. Use to select or deselect all photos on the external storage (e.g. microSD card).
5. Use to set the sort order of photos before import and to order by ascending/descending.

Note: It is currently not possible to add a caption or define the most important part of the photo when using the import function. An alternative for this is to add yourself to your friend list and send the photos using the app.

Export photos

• To export photos, insert an USB device (not included) to micro USB port/or to insert micro SD card(not included) in the card slot.

Note: The export function will export all photos on the frame and profile pictures.
Remark: Click the “Play from external storage” to play files from Micro SD or Micro USB.

My Friends
This list contains all the connected friends that are allowed to send photos to your frame.

Change options for a friend

1. Click the options icon to open the friend options menu. From here you can allow / disallow if a friend may share the code to the frame. If this is enabled the friend can retrieve and share the code to the frame from his/her app.
2. From the options menu you can also delete a friend, by pressing the DELETE FRIEND button. This will remove the friend from the list and thereby remove their permission to send photos to the frame. You will then be asked to confirm the removal and if you would like to remove all photos previously received from this friend.

Add friends
To allow a new person to send you photos, simply tap the add friend button and share the presented code in whatever way you prefer.

Display

• Brightness level
• Adjust the brightness level of the screen.

Sleep mode
Frameo will automatically turn off after specified time. The default setting is to turn off the screen at 23:00 and turn on the screen again at 07:00. To change this just set the sleep mode start/end time.
Note: Your frame is not powered down or in standby, so you will still be able to receive photos during sleep mode.

Slide show
Timer

• Sets the duration that a photo should be displayed before showing the next photo.

Show caption

• Sets whether or not to display the captions that your friends have sent with the photo. Check to display captions. Uncheck to hide captions.

Fill frame

• Sets the default frame photo setting.
• Uncheck to make the photo fit inside the screen of the device, adding blurred bars on the sides or top/bottom.
• Check to set default to fill which makes the photos fit the device screen according to the most important part of the photo.

Frame background

• To adjust the background color: Blurred, black or color gradient.

Photo display order

• Sets the order in which your photos are displayed on the frame.
• By date taken: Photos are shown in order of when it was taken.
• By date received: Photos are shown in order of when it was received.
• Shuffle: Photos are shuffled and shown in a random order.

Reverse photo display order

• Sets if photos are displayed newest to oldest or oldest to newest.

Autoplay

• Enables/disables videos play automatically in the slideshow.
• Note: You can start videos manually.

Video playback

• Loop videos: The video will loop until the slideshow timer is up.
• Play once: The video will play once and show its thumbnail until the timer is up.
• Play once and continue: The video will play once and continue to the next photo.

Auto mute

• To mute the video volume automatically after 10 minutes.

Video volume

• To adjust the video volume.

WIFI

• To set which WIFI the frame connects to.
• If you are connecting to a network with a captive portal, connection status will say that Wi-Fi login is required and show . Tap this to open a login screen then you can enter credentials to access the network.

WIFI details

• Use to show details about the current connected Wi-Fi.

Reset WIFI

• Use to delete all Wi-Fi information and restart your frame.

Notifications

• Show notifications
• Enables/disables whether notifications are shown in the slideshow (e.g. when a new photo is received).

Notification volume

• Adjust the volume level for notification sounds.

Storage space

• Enables/disables notifications shown when frame storage is low.

Backup

• Enables/disables notifications shown if automatic backup has failed.

Network connection

• Enables/disables notifications showing network connection status.

New photos

• Enables/disables notifications shown when receiving new photos.

New friends

• Enables/disables notifications shown when new friends are added.

Software update

• Enables/disables notifications shown when a software update has been installed.

Feature news

• Enables/disables notifications shown when new exciting features are added.

Date and time

• Enables/disables notifications shown if time or date is not set correctly.

Backup and Restore

• Backup frame to external storage (e.g. microSD card)
• Tap to make a backup of your photos, friends and settings. The time of the latest successful backup is also displayed here.

Note: Any existing backup on the external storage will be overridden!

Automatic backup

• Click to set your frame will automatically take a backup within 30 hours of receiving new photos or making changes to your frame.

Restore from backup

• Before you attempt to restore your frame, start by confirming that your backup is up-to-date. This is done by confirming the date under “Backup frame to external storage (e.g. microSD card)”. If e.g. the last backup is too old or if no backup is made, then press the “Backup frame to external storage (e.g. microSD card)” button to make a new backup.

Note: To keep both the old and the new frame operational at the same time after restoring from backup, please make sure that both frames are updated to the latest version beforehand.

If you wish to restore a backup on a frame that has already been setup, then you must first reset the frame. This is done by pressing the “Reset frame” button. This will delete all data on the Frameo and reset the Frameo to its setup screen.
On the setup screen you can select the “Restore from backup” button which will restore your frame according to the backup.

Note: If the “Restore from backup” button isn’t visible, then confirm that the external storage (e.g. microSD card) is correctly mounted.

Reset frame

• Removes all data from your frame.
• Note: This will permanently remove all your photos, friends/connections and settings.

Help

• Support
• Please visit https://support.frameo.net/hc for FAQ, support and to provide feedback.

Privacy policy

• For more information regarding privacy, please visit http://privacy.frameo.net.

Open source libraries

• Opens a list of opening source libraries used in the app and their licenses.

Share anonymous analytics data

• Sharing anonymous analytics data helps us tremendously to improve the Frameo software. We understand if you do not wish to share this data with us. Keep it checked if you wish to help us improve Frameo. Set unchecked to deny the sharing of anonymous analytics data.

Guide

• Opens the quick start guide, that was shown when you first started the frame.

Warranty, Compliance, Support and Safety information

• For more information regarding warranty, hardware compliances, support and safety please refer to the material included in the package.

About

• Android version
• See what version of Android that is installed on the frame.

Peer ID

• This is a unique ID for your photo frame. When contacting our support, please provide this ID with your message.

Screen resolution

• Show the screen resolution on the frame.

RAM

• Show the memory on the frame.

MAC

• Shows the MAC address of your frame.

Frameo version

• Shows what version of the Frameo software is currently installed on your frame.

Check for update

• Check if an update is available for your frame.

Beta program

• If checked the device will join the Beta program where it will receive updates more frequently and before normal release devices.

Power icon

• Press to access power menu.
• To power off the screen.
• To restart the frame.
• To enter the sleep mode.
• Note: Make sure to always use the OPEN/CLOSE button on the device or in the power menu to turn Frameo off. Never disconnect power when Frameo is running.

React menu
Tap one of the reactions to let the sender know how it made you feel.

Hide photos

• To hide the current photo. That the photo will no longer be shown in the slideshow.
• Note: If needed the photo can be shown again, please refer to “Settings” part.

Gallery

• Opens a gallery which allows for easy and fast navigation through your photos.

Fill frame

• To adjust how the photos are shown.

Adjust photo

• To rotate the photos.

VIDEOS PLAYBACK

• Press to start the playback. Press to pause the playback.
• Press to adjust the volume level.

USB OR SD PLAYBACK

You can connect a USB flash drive (not included) to the USB connector port or a SD card (not included) to the Micro SD (TF) card slot or Micro USB port on the unit to play videos as well as picture files.

1. Plug the USB flash drive to the Micro USB port on the unit. Or plug the memory card into the card slot.
2. “Play”, “Import” and ”Back up” will show on the screen.
   • Play: Tap “Play” then the files in USB or SD card will show on the screen.
   • Import: Tap “Import” will jump to “Manage photos” set up. Please refer to the “Manage photos “setup mode.
   • Back up: Please refer to the “Back up and restore” set up mode.

TECHNICAL SPECIFICATIONS

POWER SUPPLY

• AC ADAPTER: AC 100-240V 50/60Hz;
• Output: DC IN 5V 2A,10W

Hereby, NEW ONE S.A.S, declares that this MUSE M-510 WPF is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse- europe.com.

Specifications and appearance are subject to change without notice

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). There are no user serviceable parts inside the unit. Refer all servicing to qualify personnel.

• The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit.
• The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The Caution mark is located at the back of the device.

IMPORTANT!

• The use of apparatus in moderate climates.
• The Marking plate is located at the back of the device.
• Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
• Ensure that the ventilation openings is not covered with items such as newspapers, tablecloths, curtains, etc.
• Do not place naked flame sources, such as lighted candles on the apparatus.
• Do not expose this appliance to dripping or splashing water.
• Do not place objects filled with liquids, such as glass, vase on the device.
• Do not throw batteries into fire! Respect the environment when disposing of used batteries.
• AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains socket outlet completely.
• Under the influence of fast transient and / or electrostatic electric phenomenon, the product may malfunction and the user must perform a power reset of the device.
• The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other location.

If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

NEW ONE S.A.S 10, Rue de la Mission, 25480 Ecole Valentin, France

References

• privacy.frameo.net
• MUSE Electroménager - Découvrez la collection ! - MUSE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>