LAMAX Tones1 Wireless Bluetooth In-Ear Headphones User Guide

: June 13, 2024
: LAMAX

Table of Contents

LAMAX Tones1 Wireless Bluetooth In-Ear Headphones
Product Information:
Product Usage Instructions
DESCRIPTION
PACKAGING CONTENT
CONTROLS
SWITCHING ON
SWITCHING OFF
PAIRING
CHARGING
PARAMETERS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LAMAX Tones1 Wireless Bluetooth In-Ear Headphones

Product Information:

The product being described is the LAMAX Tones1, a pair of wireless headphones. The headphones feature LED notifications, a multifunction button, a microphone, and charging pins. They come with a charging station and support Bluetooth 5.3 technology. The
headphones have a maximum pairing distance of up to 15 meters and support the AAC codec. The battery capacity in each handset is 30 mAh, while the charging station has a battery capacity of 300 mAh. The headphones offer up to 8 hours of playback time on a single charge and take 60 minutes to charge. The charging station takes 85 minutes to charge. The weight of one handset is 4 grams, while the weight with the charging station is 36 grams.

Product Usage Instructions

1. Switching On: The headphones automatically switch on when removed from the charging station. To switch on manually, hold the multifunction button for 5 seconds. An audible notification will sound when switched on.
2. Switching Off: The headphones automatically switch off when inserted into the charging station. To switch off manually, hold the multifunction button for 5 seconds. An audible notification will sound when switching off.
3. Pairing: – Remove the headphones from the charging station. The headphones will automatically connect to each other. One of the headphones will be the master and ready for pairing, indicated by a green flash. – Switch on Bluetooth on your device and search for “LAMAX Tones1” in the list of available Bluetooth devices. – After successful pairing, an audio notification sounds and the LED on one of the headphones turns green and then goes off after a while. – If you encounter pairing problems, follow these steps: – Remove the headphones from the list of paired devices on your phone. – Insert
the headphones into the charging station and then remove them. – Press the multifunction button on both headphones 5 times simultaneously. Both headphones will flash 5 times. – Pair them again as described in step 1.
4. Charging: – To charge the charging station, plug the cable into the USB-C port on the back of the charging station. – Plug the other end of the cable into a USB power supply with a maximum input voltage of 5V and current of 2A. – The LED on the charging station will flash red when charging. – When fully charged, the LED will glow red. – If the charging station is discharged, the LED will flash white 4 times. Note: For more detailed information and any updates, you can download the current version of the user manual from this link: LAMAX Tones1User Manual.

DESCRIPTION

LED notifications
Multifunction button
Microphone
Charging pins

PACKAGING CONTENT

1× LAMAX Tones1
1× Charging station
1× USB-C cable (0.3 m)
1× User manual
1× Safety Instructions

CONTROLS

Switch on
Hold the multi-function button for 5 seconds
Switch off
Hold the multi-function button for 5 seconds
Play / Pause
Tap the multi-function button
Volume up
Double tap the multi-function button on the right handset
Volume down
Double tap the multi-function button on the left handset
Next track
Hold down the multi-function button on the right handset for 3 seconds
Previous track
Hold down the multi-function button on the left handset for 3 seconds
Answer call
Tap the multi-function button
End call
Hold the multi-function button for 1 second
Reject a call
Hold the multi-function button for 2 seconds
To activate the mobile assistant
Triple tap the multi-function button on the left handset

SWITCHING ON

The headphones automatically switch on when removed from the charging station. To switch on manually, hold the multi-function button for 5 seconds. An audible notification will sound when switched on.

SWITCHING OFF

The headphones automatically switch off when inserted into the charging station. To switch off manually, hold the multi-function button for 5 seconds. An audible notification will sound when switching off.

PAIRING

R emove the headphones from the charging station. The headphones will automatically connect to each other. One of the headphones will be the master and ready for pairing, this is indicated by a green flash.
S witch on Bluetooth on your device and search for LAMAX Tones1 in the list of available Bluetooth devices. After successful pairing, an audio notification sounds and the LED on one of the headphones turns green and then goes off after a while.
If you have problems pairing, remove the headphones from the list of paired devices on your phone. Insert the headphones into the charging station and then remove them. Press the multi-function button on both headphones 5 times at the same time. Both headphones will flash 5 times. Then pair them as described in step 1.

CHARGING

To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum input voltage of 5 V and current of 2 A.
The LED will flash red when charging. When fully charged, the LED will glow red. If the charging station is discharged, the LED will flash white 4 times.