LAMAX Clips1 Plus Black Wireless TWS Earphones User Guide

: June 13, 2024
: LAMAX

Table of Contents

LAMAX Clips1 Plus Black Wireless TWS Earphones
DESCRIPTION

LAMAX Clips1 Plus Black Wireless TWS Earphones

DESCRIPTION

LAMAX-Clips1-Plus-Black-Wireless-TWS-Earphones-001

Notification LED
Multifunction button
Microphone
Charging station button

CONTROLS

Switch on: Hold the multi-function button for 5 seconds
Switch off: Hold the multi-function button for 5 seconds
Play/Pause: Tap the multi-function button
Volume up: Double tap the multi-function button on the right handset
Volume down : Double tap the multi-function button on the left handset
Next track: Hold down the multi-function button on the right handset for 2 seconds
Previous track: Hold down the multi-function button on the left handset for 2 seconds
Answer call: Tap the multi-function button
End call: Hold the multi-function button for 1 second
Reject a call: Hold the multi-function button for 2 seconds
ANC ON/ ANC OFF / Transparency modes: Triple tap on the right earpiece multifunction button
Music/game mode: Triple tap on the left earpiece multifunction button
To activate the mobile assistant: Four taps on the multi-function button on the left handset

SWITCHING ON
The headphones automatically switch on when removed from the charging station. To switch on manually, hold the multi-function button for 5 seconds. An audible notification will sound when switched on.

SWITCHING OFF
The headphones automatically switch off when inserted into the charging station. To switch off manually, hold the multi-function button for 5 seconds. An audible notification will sound when switching off.

PAIRING

Remove the headphones from the charging station. The headphones will automatically connect to each other. One headset will be the master and ready for pairing, this is indicated by a white flash. Another headset will glow white.
Switch on Bluetooth on your device and search for LAMAX Clips Plus in the list of available Bluetooth devices. After successful pairing, an audio notification will sound. The LEDs in both headphones will turn off.
If you have problems pairing, remove the headphones from the list of paired devices on your phone. Insert the headphones into the charging station and hold the charging station button for 10 seconds. The LEDs on both headphones will flash red five times. Then pair them as described in step 1.

ANC AND TRANSPARENCY MODE

ANC on switching on active ambient noise cancellation
ANC off switching off active ambient noise cancellation. Standard mode
Transparency mode amplification of ambient sounds thanks to microphones in the headphones

CHARGING
To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum input voltage of 5V and a current of 2A. The light glows red when the charging station is charging. When fully charged, it will glow white.
Before using for the first time, be sure to remove the transparent protection film on the charging pins from the inside of both headphones.
To charge the headphones, insert them into the charged charging station. When charging, the LED in the headphones lights red. When fully charged, the LEDs will glow white for 30 seconds, then turn off.