Scosche MPQ5WDXTSP Charge5 Window Dash Wireless Charging Phone Mount User Manual

Scosche MPQ5WDXTSP Charge5 Window Dash Wireless Charging Phone Mount

INCLUDED ELEMENTS

• A. MagicMount Pro Charge5 Magnetic Wireless Charging Mount
• B. Window/Dash Mount
• C. MagicPlate™
• D. Protective Film
• E. Car Adapter
• F. Cable Routing Clips (2)
• G. Cleaning Wipe
• H. Mounting Template for MagicPlate

DEVICE SETUP

• SECTION A – iPhone® 12 or Later (with optional MagSafe Case)
• SECTION B – Wireless Charging Smartphones (with Case) iPhone® 11 / Pixel 4 & Newer (Case Required) Wireless Charging Smartphones (without Case)
• SECTION C – Attaching Device with MagicPlate
• SECTION D – Window/Dash Mount
• SECTION E – Mount Adjustment
• SECTION F – Connection & Charging

SECTION A – iPhone® 12 or Later (with optional MagSafe Case)

• iPhone 12 or Later (with optional Mag Safe Case)
  If using a case, it must be a MagSafe case (not included) for MagicMount Pro Charge5 to function properly.
  Note: MagicPlate not required.

• iPhone 12 or Later (without Case)
  Note: MagicPlate not required.

SECTION B – Wireless Charging Smartphones (with Case)

• Wireless Charging Smartphones (with Case)
• iPhone 11/ Pixel 4 and Newer (Case required*)
• Use the included template to place
• MagicPlate in the correct position.
• *Manufacturing materials do not allow adhesives to bond directly to the device.
• Wireless Charging Smartphones (without Case)
• Use the included template to place
• MagicPlate and Protective Film in the correct position.
  It is recommended to use the Protective Film.
  If the MagicPlate needs to be removed, the film simplifies the process. To remove the MagicPlate use a credit card and slide in between the film and MagicPlate. Do NOT use anything sharp/ hard as this can damage the device.

SECTION C

SECTION D

Window/Dash Mount

1. Clean the mounting surface using supplied wipe*.

2. Remove protective film from the StickGripm suctioncup base**

3. With the lever in the UP position, place the mount on surface* and press lever down to lock in place.
   Supplied cleaning wipe may cause discoloration of certain plastics, vinyls and painted surfaces. It is recommended to test in an inconspicuous area first.
   **Note: StickGrip suction cup may leave residue or discoloration on some surfaces. It may also leave a ring of residue when mounted to the dash.

4. To renew and reuse StickGri mounting base, rinse underwarm water and allow to air dry.

SECTION E
Charging Mount Adjustment Loosen ball-joint collar to adjust angle or rotate mount 360°.

SECTION F

• LED Status Indicator
  • Blue: Charging
  • Flashing Red: Foreign Object Detected (FOD)
• **Wireless Charger***
  • Input: 12.0V=== 2.0A
  • Output: 15.0W/10.0W/7.5W/5.OW
    *Actual charge rates may vary depending on device software and environmental conditions.
• Car Adapter
  • Input: 12.0V-24.0V=== 6.0A
  • Type-C Output: 5.0V-== 3.0A / 9.0V-== 2.22A
  • DC Output: 12.0V=== 2.0A

MagicMount PRO CHARGES How-To Video …
Scosche Industries

1550 Pacific Avenue
Oxnard, California 93033
Phone: 800-363-4490 ×1 / 805-486-4450 ×1
www.scosche.com
02021 Scosche Industries
Scosche, Magicount, MagicPlate, StickGrip are all trademarks of Scosche Industries.
Other marks or brands are the property of their respective owners.
Devices and or appearance may vary.
Designed in Oxnard, California

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>