SCOSCHE MPQ5DVXTSP MagicMount Pro Charge5 Dash Vent Wireless Charging Phone Mount Instruction Manual
- June 13, 2024
- Scosche
Table of Contents
SCOSCHE MPQ5DVXTSP MagicMount Pro Charge5 Dash Vent Wireless Charging Phone Mount
INCLUDED ELEMENTS
A Magic Mountm Pro Charges Magnetic Wireless Charging Mount
B. Dash Mount
C Vent Mount
D. MagicPlate’
E. Protective Film
F. Car Adapter
G. Cable Routing Clips (2)
H. Cleaning Wipe
I. Mounting Template for Magic Plate
DEVICE SETUP
SECTION A
iPhone 12 or Later (with optional MagSafe Case) If using a case, it must be a Mag Safe case (not included) for MagicMount Pro Charges to function properly Note: MagicPlate not required
iPhone 12 or Later (without Case)
Note : MagicPlate not required.
SECTION B
Wireless Charging Smartphones (with Case)
iPhone 11 / Pixel 4 and Newer (Case required)
Use the included template to place MagicPlate in the correct position.
Manufacturing materials do not allow adhesives to bond directly to the device.
Wireless Charging Smartphones (without Case)
Use the included template to place MagicPlate and Protective Film** in the
correct position.
** It is recommended to use the Protective Film.
If the MagicPlate needs to be removed, the film simplifies the process. To
remove the MagicPlate use a credit card and slide in between the film and
MagicPlate. Do NOT use anything sharp/ hard as this can damage the device.
SECTION C
Attaching Device with MagicPlate.
SECTION D
Dash Mount
Assembly
Insert t-notch hitch on dash mount (A) into opening on back of mount head (B),
and slide up into (C) until locking tab clicks into place (D).
Disassembly: Press lever up to release locking tab (E).
Slide dash mount down to remove (F).
Installation
Clean the mounting surface using supplied wipe (G).
Remove backing from adhesive base, place mount in position (H) and press
firmly.
Supplied cleaning wipe may cause discoloration of certain plastics, vinyls and painted surfaces. It is recommended to test in an inconspicuous area first.
SECTION E
Vent Mount
Assembly
Insert t-notch hitch on vent mount (A) into opening on back of mount head (B),
and slide upward (C).
Disassembly: Slide vent mount down to remove (D).
Installation
Rotate vent clips on mount (E) to align with vent (F).
Note: Works with many vent designs (G). Not compatible with curved or
circular vents (H).
SECTION F
Charging Mount Adjustment
Dash Mount
Loosen ball-joint collar to adjust angle or rotate mount 360°.
Vent Mount
Rotates 360° only.
SECTION G
LED Status Indicator
Blue : Charging
Flashing Red : Foreign Object Detected (FOD)
Wireless Charger*
Input: 12.0V ⎓ 2.0A
Output: 15.0W/10.0W/7.5W/5.0W
*Actual charge rates may vary depending on device software and environmental conditions.
Car Adapter
Input: 12.0V-24.0V ⎓ 6.0A
Type C Output: 5.0V ⎓ 3.0A / 9.0V ⎓ 2.22A
DC Output: 12.0V ⎓ 2.0A
MagicMount PRO CHARG£5 How-To Video …
Customer Service
Scosche Industries
1550 PacificAvenue
Oxnard, California 93033
Phone: 800-363-4490 x1 /
805-486-4450 x1
www.scosche.com
©2021 Scosche Industries
Scosche, MagicMount, MagicPlate are all trademarks of Scosche Industries.
Other marks or brands are the property of their respective owners.
Devices and or appearance may vary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>