Wunderlich 31921-030 Steering Stop Limiter User Manual
- June 13, 2024
- Wunderlich
Table of Contents
31921-030 Steering Stop Limiter
User Manual
31921-030 Steering Stop Limiter
Artikel-Nr. : 31921-030
The colors are for illustrating purposes only.
| # | description | DIN | ISO | Menge Quantity |
|---|---|---|---|---|
| 1 | silentblock | 2 | ||
| 2 | steering stop | 2 | ||
| 3 | cable tie 350mm | 2 | ||
| 4 | ountersunk screws M6 x 16 3,0Nm | 7991A2 | 7991A2 | 4 |
| 5 | double-sided adhesive blank | 2 | ||
| 6 | cable tie 160mm | 4 | ||
| 7 | distance plate | 2 |
Key
Fitting tip|
---|---
Attention|
Magnification|
Fitting lubricant|
Screw|
Thread locking fluid|
Torque|
Checkliste
- 01 +02 pre-assemble loosely
- search for a suitable position, taking into account the following points
- steering wheel lock function, possibly pull slightly into the silent block
- make sure that no cables or wires are impacted with the steering fully stopped, if necessary, fix them with cable ties
- the steering stop is only effective when it´s supported at right angles to the frame
- mark position
- insert the double-sided adhesive pad and the cable pie into the loosely pre-assembled steering stop, or screw them in place
- fit the steering stop at the marked position 06
Use racing: To reduce the turning circle again when manoeuvring, leave out the double-sided adhesive pad and turn the stop sideways if necessary. Please note that no warranty can be accepted for use in racing, rally and off- road sports.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>