C2G 41508 Ceiling Mount Speaker User Manual
- June 13, 2024
- C2G
Table of Contents
C2G 41508 Ceiling Mount Speaker
Introduction
Thank you for choosing the C2G 41508 Ceiling Mount Speaker! This user manual will guide you through the features, installation, and recommended uses for your new in-ceiling speaker. Specifically designed for K-12 classrooms, our Plenum-Rated 2×2 Drop-In Ceiling Speaker delivers high-quality audio for multimedia presentations, video clips, movies, and other curricular activities. Let’s dive in to learn more about this versatile ceiling speaker.
Product Overview
- Brand : C2G
- Model Name : 41508
- Speaker Type : In Ceiling
- Drop-In Ceiling Speaker : This 70V drop-in ceiling speaker is designed to mount in the drop-ceiling frame commonly found in classrooms.
- Quality Function : 5 oz. magnet, 8 Ohm impedance, 100-degree coverage angle.
- Compatibility : Available in an industry-standard 70-volt version with a 25-volt tap.
Technical Specifications
- Subwoofer Diameter : 8 inches
- Speaker’s Maximum Output Power : 15 Watts
- Item Weight : 0.1 Kilograms (3.52 ounces)
- Product Dimensions : 26 x 25.5 x 4.5 inches
- Country of Origin : USA
What’s in the Box
- 1 x Ceiling Mount Speaker
Installation Instructions
Please read these installation instructions carefully before proceeding with your installation. If you have any questions or concerns, consult a professional installer or contact our customer support team.
Note: Always make sure to turn off all power sources and ensure that the area is safe before beginning any installation work.
Required Tools
- Ladder
- Measuring tape
- Pencil or chalk
- Drill
- Screwdriver
- Wire strippers
- Voltage tester
Pre-Installation Preparation
- Site Inspection : Ensure that the drop-ceiling frame where you plan to install the speaker is securely fastened and compliant with local building codes.
- Check Building Codes : Some areas have specific building codes and regulations regarding the installation of electrical and audio equipment. Make sure you are compliant.
- Plan Speaker Placement : Determine where you want to place the speaker within the drop-ceiling frame for optimal audio distribution.
Step-by-Step Installation
- Step 1: Mark Installation Spot
- Climb up the ladder and use a measuring tape and pencil to mark the exact location where you want to install the speaker within the drop-ceiling frame.
- Step 2: Create an Opening
- Make sure to turn off any electrical sources before proceeding.
- Use a drill to create an initial hole in the drop-ceiling tile.
- Carefully cut out the remaining part of the tile to make space for the speaker.
- Step 3: Check for Electrical Wiring
- Use a voltage tester to ensure there are no electrical wires near your installation area.
- Step 4: Attach Seismic Tie-Off Points
- Secure seismic tie-off points to the ceiling, following local building codes, for additional safety.
- Step 5: Connect Speaker Wiring
- Take the audio wire from the ceiling and connect it to the speaker terminals, making sure to match polarity (+ to + and – to -).
- Use wire strippers to remove insulation, if necessary.
- Tighten the terminals to secure the wire.
- Step 6: Set the Watt Taps
- According to your sound system requirements, set the watt taps to 0.5, 1.0, 2.0, or 4.0 watts.
- Step 7: Mount the Speaker
- Place the speaker into the hole you have created in the ceiling tile.
- Use the included screws to attach the speaker securely to the drop-ceiling frame.
- Step 8: Final Check and Power Up
- Make sure all connections are secure.
- Turn on the power and test the speaker to ensure it works correctly.
Troubleshooting
No Sound
- Potential Causes:
- Loose wiring
- Amplifier is turned off or malfunctioning
- Watt tap settings incorrect
- Solutions:
- Double-check all wire connections at both the speaker and amplifier ends.
- Ensure the amplifier is on and properly connected.
- Check and adjust the watt tap settings on the speaker according to your system’s requirements.
Distorted or Low-Quality Sound
- Potential Causes:
- Speaker damage
- Poor-quality audio source
- Incorrect watt tap settings
- Solutions:
- Inspect the speaker for visible damage like torn cones or disconnected wires.
- Ensure the audio source is of high quality.
- Check and adjust the watt tap settings on the speaker according to your system’s requirements.
Intermittent Audio
- Potential Causes:
- Loose or poor-quality wiring
- Fluctuating power supply to the amplifier
- Solutions:
- Re-secure all wire connections.
- Check the power supply to the amplifier for consistent voltage.
Wiring Issues
- Potential Causes:
- Polarity mismatch
- Loose connections
- Solutions:
- Ensure that the positive and negative terminals on both the speaker and amplifier are correctly matched.
- Tighten all wire connections.
Watt Tap Settings
- Potential Causes:
- Incorrect wattage selection
- Solutions:
- Consult the user manual to ensure you’ve set the watt taps correctly for your specific needs.
Compatibility Issues
- Potential Causes:
- Amplifier and speaker impedance mismatch
- Solutions:
- Check to ensure the speaker’s 8 Ohm impedance matches the amplifier’s capabilities.
Contacting Customer Support
- If none of the above solutions resolve your issue, please contact our customer support for further assistance.
- Provide the model name (41508).
- Offer a detailed description of the issue.
- Note any steps you’ve taken to resolve it.
FAQs
What is the primary use for this speaker?
The C2G 41508 Ceiling Mount Speaker is primarily designed for use in K-12 classrooms to enhance the audio experience for multimedia presentations, video clips, and movies.
Is the speaker Plenum-Rated?
Yes, this speaker comes with a Plenum-Rated enclosure, making it suitable and safe for use in educational settings.
What is the speaker's maximum output power?
The maximum output power of this speaker is 15 Watts.
What are the dimensions and weight of the speaker?
The speaker measures 26 x 25.5 x 4.5 inches and weighs 0.1 kilograms (3.52 ounces).
What are watt taps?
Watt taps allow you to set the power level that the speaker will operate at. This model offers 0.5, 1.0, 2.0, and 4.0 watt taps for versatility and compatibility with various systems.
Can I install this speaker myself?
If you are comfortable with basic tools and have a general understanding of audio and electrical installations, you should be able to install this speaker yourself. However, it is always recommended to consult or hire a professional for installation, especially for larger setups.
What is the importance of Seismic Tie-Off Points?
Seismic tie-off points add an extra layer of safety by securing the speaker to the ceiling structure, particularly in regions where earthquakes are a concern. They also help to meet local building codes.
What should I do if there is no sound coming from the speaker?
Double-check all wiring connections and ensure that your amplifier is turned on and set to the correct input. Also, verify that the watt tap settings on the speaker match those on the amplifier.
What should I do if the sound quality is poor?
Check for any visible damage to the speaker, like torn cones or disconnected wires. Also, make sure the audio source is of high quality and that the watt taps are correctly set.
How can I contact customer support?
If you encounter issues not covered in this FAQ or the user manual, you can reach out to our customer support team via phone or email for further assistance.
Is there a warranty for this product?
For information on the warranty, please visit our official website.